How to make a homemade shooting pistol. How to make a gun from wood: step-by-step master classes with photos

This question interests quite a few fathers and grandfathers who have sons and grandchildren, despite the fact that today in children's store chains you can purchase any similar toy, based on the wishes of the child, as well as the financial capabilities of his parents.

How to make a homemade gun from wood

If a question arises, how to do homemade pistol wooden shooter or not , You can try to show all your imagination and, if you have certain carpentry skills, try to plan it based on a pre-selected suitable wooden blank. It is best to take soft tree species for this; linden or pine will work very well in this case, but if desired, your child’s coveted toy can be cut from other species.

As a basis, you should take a board of the required size and thickness, perhaps use materials that were previously used, but for some reason have lost their relevance and significance, for example, part of old furniture or leftovers that were not used in manufacturing.

How to make a gun out of wood: drawing

Of course, any craftsman, when creating a wooden figurine, will rely on a pre-made auxiliary drawing. You can try to find such instructions for the manual in old books on carpentry, do-it-yourself magazines, or use advanced technologies, and look at everything that the resources of the World Wide Web - the Internet - offer us. You can also try to make a similar drawing yourself. To work in this case, you will need a sheet of paper, a simple pencil, an eraser (eraser), a ruler, and also, possibly, a compass.

It will be much easier if, as a basis for your future creation, you take a ready-made plastic model of a similar toy, which you will probably find in the house where boys grow up, and simply remove from it, exactly down to the millimeter, from all possible sides the parts you need to construct the drawing and further work measurements.

If you have nothing to take measurements from, you can try to draw something yourself. You should not bother with a design that is too complex; firstly, it will take you too much time to create the drawing itself, and secondly, if you do not have a certain amount of knowledge and your arsenal does not have a sufficient number of woodworking tools, your plan may simply not work out general disappointment for you and your boy. Therefore, it is enough to simply repeat the shape of the pistol, which, by the way, even your child can draw for you.

Once the drawing is ready, you can proceed to work. As in the case of sewing, where needlewomen, before cutting the fabric, transfer all the details of the pattern onto it, it is better to first schematically transfer the main shapes of the future wooden toy with a simple pencil onto the selected base material.

Next, armed with the appropriate tools, you should begin making the toy. This will require patience, perseverance and accuracy, as well as time. Gradually, layer by layer, a piece of wooden blank will begin to take on the desired shape in your hands and become more and more like a pistol for children's games.

Instructions from carpentry experts, as well as video tutorials, will help you perform all the manipulations correctly. Which you can probably find on the Internet without any problems. To do this you just need to select one of the search engines, set the phrase there: - “ how to make a gun from tree video» , or similar and necessary information will be immediately provided to your attention.

When the product is ready, it is better to sand its entire surface so that the wooden base becomes smooth and does not lead to minor injuries such as punctures, splinters, etc. when playing with this toy. Sandpaper with zero abrasiveness is best suited for these purposes.

To make the finished pistol look even more attractive, it can be coated on top, like others, with several layers of varnish. In this case, it is better to use acrylic-based varnish; it is safe and non-toxic, which is extremely important when making a children's toy. But if you don’t have such an environmentally friendly coating on hand, you can also use the traditional one, which is used specifically for wooden surfaces.

Please note that work on opening varnish on figures should be done exclusively in a well-ventilated area, or better yet in the open air, so that noxious fumes can escape. chemical material did not provide negative impact for the health of you and your child. For the same reasons, you should leave the toy pistol to dry away from living quarters.

The pistol can also be decorated with paints. Here it is advisable to use natural-based dyes - acrylic, gouache or even watercolor. Give your child such pleasure and allow him to choose the color and design of the gun toy. In addition to the fact that such a process will greatly delight your baby, it will also have an extremely beneficial effect on his development. After all, this is how, in a playful form, children’s imagination awakens. Skills are developed in accuracy, perseverance, patience, and the desire to complete the work started. And when working with small details and drawing them, the process actively involves fine motor skills fingers, which in turn has a positive effect on the mental functioning of the brain.

How to make a gun from wood that shoots bullets

In order to make this version of the toy, you must have certain knowledge, tools and skills. One thing can be said for sure - creating such a toy is extremely difficult and beyond the power of amateur carpenters; here it is necessary to draw up a lot of drawings and do a lot of complex, sometimes even jewelry, work in order to achieve the intended goal. Therefore, it is better to abandon this idea and talk your dreaming child out of it. In addition, such a wooden toy gun can turn out to be very dangerous in the hands of a child, and lead to the most unpredictable consequences, ranging from minor injuries and injuries to serious threats to health.

But if you still want to try your hand, then it will help you figure out how to make a shooting gun out of wood video, following which you can create your own model wooden weapons. However, it should not end up in the hands of a child; for the reasons described above, such toys for adults are made exclusively for souvenir purposes and are valued only as a delicate and professional work of a master.

Stop there how to make a combat pistol from wood we will not. Since our article is primarily aimed at making interesting toys for children, and not for adults, read below how you can create interesting models quite easily and quickly based on cheap and accessible materials - paper and cardboard. In one of our articles we told you about, today we will share other equally interesting works.

As you can see, you can make toy weapons for little fidgets from a wide variety of materials, from wood to paper. The main thing is that such fun is safe, interesting and does not awaken hatred and aggression in the child. Therefore, it is better to play less with such models, giving preference to something calmer - toy vehicles, outdoor games with sports equipment or educational logical toys.

How to make a shooting pistol?

It is absolutely possible to make a shooting pistol different ways and from all kinds of materials. A lot depends on the time you are willing to spend on work and on your imagination. It will be easier to follow these instructions if you have an understanding of the pistol's design. You can learn about the main components of a pistol from our article. Below are several ways to make a gun that will shoot rubber bands, paper or bullets.

A gun that shoots rubber bands

Materials

You will need:

• 3 wooden barbecue skewers or plywood stick 200*10*5 mm;
• 3 wooden clothespins;
• 2 plastic clothespins (can be replaced with wooden ones);
• stationery erasers;
• scissors or knife;
• glue gun or wood glue.

Gun manufacturing process

The technology for making a gun that shoots rubber bands is shown in this video.

Pistol that shoots bullets

This original toy can be made within a few minutes, and you can use crumpled paper, plastic balls and even marshmallow pieces as bullets.

Materials

To make such a pistol you will need:

• polyvinyl chloride pipe - 55 cm, diameter 2 cm;
• 2 PVC corners of suitable diameter;
• 2 PVC tees of suitable diameter;
• 2 PVC plugs of suitable diameter;
• scissors for cutting PVC pipes or a sharp knife;
• tape measure or measuring tape;
• soldering iron for PVC pipes.

Build process

A special soldering iron is used to solder pipes, but some craftsmen heat the ends of PVC products over an open fire and then connect them. The disadvantage of the latter method is that if it is not calculated correctly and overheated, the edge of the pipe will melt, and this can reduce the internal diameter of the workpiece. Therefore, it is better to practice a little beforehand.

The gun is ready. The bullet is inserted through the barrel. To fire a shot, grasp the pistol by the handles and blow into the “trigger” hole. The firing range from such a pistol can reach several meters.

A pistol made of wood... How many childhood memories are there in this combination of words... Memories of how very young boys and girls chased each other, imagining themselves as robbers and those who caught them. The robbers “shoot” from the simplest toys made of simple wood; they became the first pistols, the first toy weapons made with their own hands. This article will discuss how to make a pistol from wood.

Making weapons is not just a children's dream

If in childhood you simply took a piece of wood that was suitable in shape, now you can use special tools and make a toy that is practically no different from a real weapon. If you build the gun correctly, it will even be able to fire. made of wood can please not only boys, but also their fathers.

Let's start production

To make a “weapon” you will need: a piece of rubber drill with a drill no larger than 6 mm, a well-sharpened knife, a saw, a file, sandpaper, a knitting needle or a nail of the same length. To understand how to make a pistol from wood, it is worth knowing that the design of this product is divided into three elements: solid handles and barrel, pistons and rubber bands.

First of all, you will need to make the barrel and handle of the gun. They need to be cut out of wood, the thickness should be at least 2 cm. You can choose any shape.

The main thing is that you like it and be comfortable. Don’t throw away the rest of the block, you will need it later.

We continue to answer the question of how to make a gun from wood. In the finished trunk, use a drill to make a hole along the entire length. Sand the hole made thoroughly with sandpaper. To do this, you need to roll the paper into a tube and put it on a suitable stick; either a long nail or a knitting needle will do. From the remaining piece of wood you need to make a piston. It looks like a long wooden stick, slightly less than 6 mm in diameter. There should be a slight thickening on one part of the piston. This end will be called the sear. The piston itself must be the entire length of the barrel and freely enter and exit it. You need to attach an elastic band to the thickening. It or the tape must be cut from a piece of a bicycle inner tube. Instead of a wooden rod, you can simply take a long nail. His hat will serve as a sear. The nail itself must be cut to the length of the barrel, and the cut area must be sanded well with a file to completely dull it.

The finished piston is placed in the barrel of the pistol, while at the same time it is necessary to pull the rubber band onto the handle of the weapon. The sear will need to be adjusted so that when it is pulled back the trigger is raised. You should also make sure that it can catch on the protrusion on the pistol handle. At the same time, the piston will be firmly fixed in the cocked state. The DIY gun made of wood is ready.

We fire a training salvo

You need to shoot from such a design in this way: take the pistol in your hand, thumb At the same time, the hands push the sear upward, it slides and moves the piston along the barrel. If you don’t know how to make a gun out of wood, then this article should help you achieve excellent results.

Sometimes there comes a moment in the relationship between father and child when all the games and entertainment are practically running out. You have to rack your brains to find new forms of leisure in order to captivate your child as much as possible and not let him get bored. In such cases, the Internet or special printed publications, in which it is collected huge base games for every taste and taking into account age characteristics.

How to make a gun from wood

One of the proven ways to engage a child can be military sports games, such as fresh air, and within a house or apartment. Moreover, most interesting game it will be if everything necessary equipment and make your own ammunition.

The key element in this type of game is weapons, and in particular all kinds of pistols and machine guns. You can use weapons purchased in a store, but the most exciting and interesting thing will be to make a pistol from wood with your own hands. This activity can interest the child and contribute to the development of new skills and abilities. At the stage of preparation for the game, the question may arise about how to make a pistol out of wood. You don't need any supernatural abilities to do this. The whole process will not seem overly complicated.

Necessary materials

To do this, you will need some tools and materials that can easily be found at home or in the country: a board made of non-solid wood, a ruler, a pencil or pen, a plane, a hacksaw, a file, a vice or clamps, a wood burning machine, sandpaper and varnish. This will be quite enough to make a homemade pistol made of wood.

Some stages in the process of making a toy can be done by a child. Direct participation in the process of making a pistol will not allow him to get bored.

Also an important and desirable point in the manufacture homemade weapons is a drawing of a pistol made of wood. You can easily find it on the Internet or draw it yourself, taking into account all the wishes for the future product.

Making a pistol

On initial stage You should take an existing board and select an area on it without knots, holes or damage. Optimal thickness wood material should be 30-40 mm. It is desirable that the wood is sufficiently dried, which will make it easier to sand at the final stage. Using a hacksaw, you need to cut out the required workpiece and carefully process its surface using a plane and sandpaper. The thickness of the board should be the same throughout its entire thickness.

Drawing selection

Having decided on the model and parameters of the pistol, you need to make a drawing of it or modify the existing one, taking into account all the nuances and wishes. It is possible to use illustrations or photographs of the weapon you like to recreate the smallest details as much as possible. You can turn to specialized forums, where they can tell you how to make a wooden pistol as similar as possible to the original.

The next step will be this: you should transfer the image of the previously made drawing to the existing workpiece, preserving all the parameters and dimensions and taking into account all the smallest details and features of the future pistol. To make it convenient to cut a wooden workpiece, it can be secured in a table vice or using clamps. This will greatly facilitate the process of making a pistol. It is worth cutting out parts not strictly according to the applied contour, but with a little margin for finishing.

Workpiece processing

Using a file, sandpaper and a knife, it is necessary to give the product all the inherent features of a weapon, highlight all the necessary and distinctive design details, and identify the key elements of a real pistol: trigger, front sight, butt. At the final stage of processing the workpiece, a mock-up should be obtained that exactly resembles a real pistol and corresponds to the image in the drawing. The greater the similarity, the more pleasant it will be to hold such an object in your hands.

The final stage

Using sandpaper of varying degrees of coarseness, remove all unevenness and roughness and sand all sharp corners.

The presence of a grinding machine or machine can speed up the process of final processing of the workpiece. Some details can be highlighted using a wood burning device. At the final stage, to give a more aesthetically pleasing finished look, the toy should be coated with several layers of dark varnish and allowed to dry thoroughly. To add shine and gloss, the product can be polished with wax.

By doing this activity with your child, you will not only promote bonding, but also teach him how to make a gun out of wood. In the process of processing wood material, you can acquire some skills that earlier child did not possess. And, without a doubt, it is very nice to have something made with your own hands.