German light reconnaissance tank "Lux" (sometimes Luchs (from German "Lynx")) "Luchs" PzKpfw II Ausf L
Description
Work on creating a new light tank began in Germany even before World War II. In the summer of 1938, a new project was started, which would soon result in light tank Luchs. At the initial design stage, the tank received the designation VK 901. The vehicle was considered a development of the PzII light tank series, but the new project resembled the “two” only in armament (20-mm KwK38 gun), as well as armor of similar thickness. As for the design of the tank base - the chassis, it was fundamentally different from the PzII - it used the notorious "chessboard" arrangement of the rollers. The same scheme will be used on the famous heavy Tiger tanks. However, the project was not very successful at first - only a little more than ten tanks of this type were actually produced. The true development of the project for the future Luchs tank began already during the war against the USSR, when the Germans faced an acute problem of providing for their reconnaissance units,.jpg)
which, in the Russian off-road conditions, stopped coping with their tasks. The VK1303 project was launched, which envisaged the creation of a tank with good maneuverability, reliable chassis and a large power reserve, which could perform reconnaissance functions in the extreme conditions of the eastern front. In the summer of 1942, the first prototype produced had already passed tests. At the same time, it showed excellent results in terms of reliability, covering almost 2,500 kilometers without breakdowns or equipment failures. The project was approved and the tank was put into service under the name Pz.II Ausf.L Luchs The armor of the new light tank was already quite weak by mid-1942, but its main task was reconnaissance, not fire combat with enemy tanks or breaking through fortified positions, so this is possible and should not be considered a pronounced drawback. The KwK 38 automatic cannon of 20 mm caliber was also already too weak by the summer of 1942. Possessing a high rate of fire (220 rounds per minute), it could successfully withstand enemy infantry, as well as light Soviet tanks of outdated designs or armored vehicles, the armor of which was penetrated by the fire of this weak weapon. Fighting medium and heavy tanks was out of the question - Luchs was not suitable for such tasks. It could successfully play the role of a second-line auxiliary tank - cover the rear, accompany supply columns, resist partisan detachments, and most importantly, conduct reconnaissance on the front line in the absence of strong enemy anti-tank defense. That is, it could successfully perform the tasks for which it was created. Since autumn 1942 light tanks Luchs began to enter service with reconnaissance companies of Panzerwaffe tank battalions. They were used in tank units both on the eastern front against the Red Army and in the west against the Allies landing in Normandy. .jpg)
In SS units, tanks of this type remained in service until 1944. Yet, despite the fact that this tank was clearly auxiliary, its weak armament and armor sometimes limited the possibilities of its use even for its immediate tasks - reconnaissance. In this regard, during the war, attempts were made to somewhat strengthen the tank's armor. It was also planned to re-equip the Luchs tanks with 50 mm Kwk39 L/60 guns to increase their effectiveness in battle. This apparently was not done, although there is unverified information that some of the Luchs light tanks were nevertheless equipped with these guns. Giving a general assessment of this tank, we can say that it could successfully perform the reconnaissance functions assigned to it, since its tactical and technical characteristics, in particular its range, maneuverability and reliability, allowed it to conduct reconnaissance in the most difficult off-road conditions. As for the combat value of the tank, it is not impressive - the Luchs could only fight successfully with lightly armored vehicles and enemy infantry. The production of Luchs tanks was also quite small and did not exceed one and a half hundred units, which is very small compared to the overall production of tanks in Germany. The presence of these tanks in the troops was minimal due to their modest production. Back in 1938, the German army ordered the development of a light reconnaissance tank with a combat weight of about 9 tons, a 20-mm automatic cannon and armor up to 30 mm thick. Over the next few years, leading developers of armored vehicles created several variants of similar vehicles, which, however, did not reach mass production. The light reconnaissance tank project was brought into service by the troops only by the end of 1942. The production vehicle of the new type was designated Pz.Kpfw.II Ausf.L Luchs.
The appearance of a new modification of the Panzerkampfwagen II tank was preceded by a number of interesting events. Let us recall that at the end of the thirties, the Wehrmacht wished to receive a light tank based on the existing Pz.Kpfw.II, capable of performing reconnaissance missions and, if necessary, participating in battles, for which it required appropriate protection and. The first version of such an armored vehicle was the VK 901 tank from MAN and Daimler-Benz. This development was tested, but did not receive customer approval due to insufficient protection characteristics and exceeding the required combat weight by about one and a half tons.
Later, the VK 903 project appeared, which also did not suit the military. Increasing the thickness of the side armor by 5 mm did not provide the desired increase in protection, and also prevented the weight requirements from being met. Subsequently, the development of a light tank weighing up to 12-13 tons, called VK 1301, was approved. This vehicle, like its predecessors, did not go into production. Moreover, one of the main reasons for its abandonment was the noticeable progress of the VK 1303 project, which was being developed at the same time. At the same time, there were some technical problems.
Museum tank Pz.Kpfw.II Ausf.L Luchs from Saumurai Photo Wikimedia Commons
In mid-1940, the Czechoslovak companies BMM and Škoda were involved in the program to create a light reconnaissance tank, which led to a serious increase in competition and some acceleration of work. By the end of 1941, all participants in the program submitted their new equipment for testing. An interesting fact is that the first stage of the competition ended with the victory of a light tank from BMM. However, MAN specialists soon improved their version of the armored vehicle, after which it was able to win the second stage of the program in mid-1942. The MAN tank was now proposed to be mass-produced and used by the troops.
Development of the project with the symbol VK 1303 started at the end of 1940. Using existing experience and developments from previous light tank projects, MAN specialists had to develop their own version of an armored vehicle with the required characteristics. By this time, the customer agreed to raise the maximum combat weight to 13 tons, which should have simplified the creation of the project to a certain extent, and also made it possible to provide acceptable protection. In addition, this made it possible to complete the development of a new tank in a relatively short time, since it became possible to widely use existing components and assemblies without major modifications.
The use of ready-made developments led to the expected results. Externally, the VK 1303 tank should have been minimally different from other equipment created earlier. Certain exterior features of this machine were reminiscent of the VK 901, VK 903 and VK 1303. At the same time, there were some noticeable differences in the design of certain units. Within the framework of the two newest projects VK 1301 and VK 1303, it was planned to implement the same ideas, but it was proposed to achieve the goal in different ways and using different equipment.
Prototype chassis used in early testing. Photo: Aviarmor.net
In the VK 1303 project, it was proposed to use existing developments from previous projects, including those related to hull design and armor protection. To save time and maintain continuity, the new tank had to have a general layout traditional for German armored vehicles of that time. The engine was placed in the stern, the transmission in the front of the hull. The habitable compartments should have been placed between them. It was also planned to use the developed form of the hull, assembled by welding from armor plates of various configurations.
The hull of the VK 1303 tank retained the frontal part characteristic of its predecessors, consisting of three sheets 30 mm thick. The bottom and middle sheets were located at different angles to the vertical, the top one was mounted with a slight tilt back. Behind the frontal part were placed vertical sides 20 mm thick. Feed was made from a similar sheet. The roof and bottom should have a thickness of 13 and 10 mm, respectively. Compared to previous developments, the turret box was expanded due to the use of a new turret. To make more efficient use of the internal space, the rear hull sheet was folded back and formed an additional niche.
It was proposed to install a tower on the roof of the building, similar to that used in previous projects. The tower body consisted of several sheets of different shapes, installed with an inward slope. To improve performance and lighten the structure, the turret had bevels at the front and rear of the sides. Protection of the turret from fire from the front was provided by the forehead and a 30 mm thick mask. It was proposed to make the sides of the tower from sheets with a thickness of 15 mm, and the stern from 20 mm. The top of the tower was covered with a sloping 13-mm roof. An interesting feature of the VK 1303 project was the location of the turret in the center of the hull, and not shifted to the side, as in other modifications of the Pz.Kpfw.II.
Luchs tank diagram. Drawing by M. Baryatinsky "Scouts in battle"
The new tank retained the power plant of its predecessors. The aft engine compartment housed a Maybach HL 66P carburetor engine with a power of 180 hp. The engine was equipped with an electric starter, but could also be started using a manual system. The transmission included a main Mecano dry friction clutch from Fichtel & Sachs, a ZF Aphon SSG48 gearbox with six forward speeds and one reverse, as well as MAN shoe brakes. In the aft compartment of the hull, together with the engine, two fuel tanks with a total capacity of 235 liters were placed.
The chassis for the VK 1303 tank was a further development of the units used in previous projects. At the same time, as in the case of the VK 1301, some design changes took place in order to strengthen the units and compensate for the increased combat weight. The chassis received five road wheels with a diameter of 735 mm on each side. The rollers with rubber tires were equipped with individual torsion bar suspension. In addition, the front and rear pairs of rollers received additional hydraulic shock absorbers. The rollers were mounted in two rows in a checkerboard pattern: three inside and two outside.
Spoke front drive wheels with lantern gearing were again used. Guide wheels with tension mechanisms were placed in the stern. The new project used a 360 mm wide small track, developed for one of the previous reconnaissance tanks.
The armored turret of the tank was supposed to house all the necessary machine gun and cannon weapons. Interestingly, during the design the turret and weapon system underwent some changes. Thus, in the first version of the VK 1303 project, an asymmetrical placement of the weapon installation was envisaged, but later it was decided to place the gun on the longitudinal axis of the turret. This made it possible to improve the ergonomics of the internal volumes of the tower to a certain extent without significant changes to its design.
One of the full prototypes. Photo: Aviarmor.net
The 20-mm KwK 38 automatic cannon, already used on several previous modifications of the Pz.Kpfw.II, was chosen as the main weapon for the new tank. This gun with a 55-caliber barrel could accelerate projectiles to speeds of about 1050 m/s and fire 220 rounds per minute. The most effective armor-piercing ammunition of the gun could penetrate up to 35-40 mm of homogeneous armor from a distance of 100 m. The gun was fed with ammunition using belts placed in metal boxes. Inside the fighting compartment there was a gun ammunition load of 330 shells.
A coaxial MG 34 machine gun of 7.92 mm caliber was mounted in the same installation with the cannon. The machine gun's ammunition capacity is 2250 rounds.
It was proposed to aim the weapon using manual drives, which ensured the rotation of the turret and the raising of the gun mount. With the help of such mechanisms it was possible to fire in any direction with an elevation of the barrels from -9° to +18°. The gun was equipped with a TZF 6/38 sight from Zeiss, which could be used for firing from a cannon and machine gun. In addition, the machine gun was equipped with its own KgzF 2 sight.
Over time, the light tank received additional weapons in the form of two three-barrel smoke grenade launchers. These devices were supposed to be placed in front of the sides of the tower. The purpose of the 90 mm grenade launchers was to provide camouflage in various combat situations.
Interior of the fighting compartment. Photo Pro-tank.ru
The crew of the new tank consisted of four people. The driver and radio operator were to be located in the front control compartment of the hull. There were two hatches in the roof of the control compartment for access to the crew seats. There were four hatches in the frontal plate and sides of the hull to monitor the environment. It was planned to install FuG 12 and FuG Spr “a” radio stations at the radio operator’s workplace. The antenna of one of the stations was placed on the rear of the turret, and the second, a panicle type, was to be mounted in a special cup on the right side of the turret box.
The turret housed the workstations of the commander and gunner, who was also supposed to serve as a loader. It was decided to abandon the use of the commander's cupola, which is why observation was now proposed to be carried out using two periscopes in the hatches. A slit viewing device also appeared on the right side of the tower.
During the VK 1303 project, MAN designers managed to meet the customer's requirements for the dimensions and weight of the machine. The length of the tank was 4.63 m, width - 2.48 m, height - 2.21 m. The combat weight did not exceed 11.8-12 tons. The estimated maximum speed reached 60 km/h, cruising range - 290 km. Such high mobility had to be ensured by the relatively good specific power of the tank: at least 15 hp. per ton.
Pz.Kpfw.II Ausf.L tank at the front. Photo: Aviarmor.net
By mid-1941, the VK 1303 project had reached the stage of testing the prototype chassis. At the MAN plant, a prototype of the vehicle was assembled, which was not equipped with a full-fledged hull and turret. To simplify the design, this vehicle received an empty volume in place of the fighting compartment, which was partially filled with cargo to simulate the weight of the tank. The experimental vehicle also received a windshield and several other parts that are completely uncharacteristic of armored combat vehicles, but make the work of the testers easier.
Comparative tests of several light reconnaissance tanks developed by different companies took place in May-June 1942. These tests showed the clear superiority of the VK 1303 tank over other vehicles. Based on the comparison results, the military made their choice - the army was to receive light tanks from MAN. Other machines had less high characteristics and therefore could not interest the customer.
In mid-1942, the VK 1303 tank was put into service under the designation Pz.Kpfw.II Ausf.L Luchs (“Lynx”). Soon an order for serial construction of equipment appeared. The Wehrmacht ordered the construction and delivery of 800 light tanks of the new model. The production of this equipment was entrusted to MAN and Henschel. In the fall of 1942 (some sources mention the fall of 1943), the first production tanks rolled off the assembly line.
By the end of 1942, a proposal arose to modernize the new tank in order to improve its basic characteristics. Thus, the weapons used caused serious complaints. By this time, the 20-mm KwK 38 automatic cannon had become outdated and had lost the ability to hit massive enemy tanks. In this regard, the development of a new version of the Lynx with enhanced weapons began. In some sources, such a machine is mentioned under the designation VK 1303b.
Museum sample. Photo: Modelwork.pl
The 5 cm KwK 39 L/60 gun of 50 mm caliber was chosen as the main means of increasing firepower. Such a weapon made it possible to solve the problem, but required redesign of the armored vehicle. The existing turret, designed for the KwK 38 gun, could not accommodate the new high-power gun. A new version of the tower was developed, characterized by increased dimensions and, according to some sources, the absence of a roof.
At a certain stage of the project's development, a proposal arose to equip the Pz.Kpfw.II Ausf.L tank with a more powerful engine. Instead of the existing Maybach HL 66P, it was proposed to use a Tatra 103 diesel engine with 220 hp. One of the production tanks underwent such a modification, but the modernization did not advance further. Serial armored vehicles were equipped only with standard carburetor engines.
Despite all efforts, it was not possible to fulfill the order for the construction of eight hundred tanks of a new type. According to various sources, no more than 100-142 Luchs-type vehicles were built before the beginning of 1944. According to some sources, several tanks were rebuilt from experimental VK 1301s, while the remaining vehicles were built from scratch. In total, MAN built no more than 118 tanks, and Henschel produced up to 18 vehicles. In January 1944, production was curtailed. By this time, the contractor factories were loaded with several high-priority orders, which is why they could no longer produce light tanks with ambiguous prospects. As a result, not even a fifth of the original order was completed.
A version of a light tank with reinforced armament, according to various sources, was not implemented in metal or did not leave the testing stage. Some sources claim that such an armored vehicle was not even built, while others talk about the assembly of several prototypes. In addition, there is mention of the production of 31 tanks with 50 mm cannons. However, according to most sources, the Lynx with the KwK 39 gun did not go into production.
A tank that has survived to this day, view of the stern. Photo Lesffi.vraiforum.com
There are references to two projects of special equipment based on the new light tank. Based on the existing chassis, it was proposed to build a Bergepanzer Luchs repair and recovery vehicle, suitable for servicing several types of light tanks. In addition, the possibility of creating a Flakpanzer Luchs self-propelled anti-aircraft gun with an original fighting compartment equipped with a 37-mm automatic cannon was considered.
The first production Pz.Kpfw.II Ausf.L tanks entered service in the fall of 1942. It was proposed to distribute reconnaissance vehicles in several units among existing large formations. It was assumed that a new company equipped with Luchs tanks would appear in the reconnaissance battalions of tank divisions. The initial order made it possible to equip a large number of formations with new equipment, but in practice the rearmament was delayed and then reduced.
Due to the halt in the production of new tanks after 100-142 units, only a few formations managed to receive the equipment: the 2nd, 3rd, 4th and 116th tank divisions, the Wehrmacht training division and the 3rd SS Totenkopf tank division. The task of the vehicles transferred to the battalions of these formations was to participate in reconnaissance and supplement the equipment already in service.
According to some reports, some operators of Pz.Kpfw.II Ausf.L tanks were dissatisfied with the characteristics of this equipment. Thus, it is known about homemade reinforcement of armor by installing additional 20-mm sheets on the frontal parts of the hull. Such modification in the conditions of military workshops made it possible to significantly increase the level of protection and survivability of the vehicle on the battlefield.
The museum tank “performs” in front of the audience. Photo Pro-tank.ru
According to most sources, Luchs tanks were actively used for a long time. The latest reports of the massive use of such equipment for intelligence purposes date back to the end of 1944. Moreover, until the summer of 1944, Lynx-type vehicles were used only on the Eastern Front, and after the start of fighting in Western Europe, some of the formations armed with such equipment were transferred to a new theater of military operations. Thus, light reconnaissance tanks, which were in service with several divisions, managed to fight on all European fronts and fight with armored vehicles of several countries of the anti-Hitler coalition.
Due to the specific combination of protection and firepower, which directly affected combat effectiveness and survivability on the battlefield, the Pz.Kpfw.II Ausf.L Luchs light reconnaissance tanks were exposed to serious risks. They could withstand enemy infantry or light tanks, but medium tanks and artillery proved too much of a threat. As a result, reconnaissance units regularly suffered losses. Moreover, by the end of the war, almost all Lynx tanks were disabled, destroyed or captured by the enemy.
Of the 100-142 Luchs tanks built, only a few vehicles have survived to this day, and are now museum exhibits. Tanks of this type are kept in the British Bovington, the French Saumur, the German Münster, the Russian Kubinka and several other museums. This equipment undergoes regular restoration and is in good condition. In addition, some of the machines are still operational and are used in demonstrations.
The project to develop a light reconnaissance tank started in mid-1938, but real results in the form of production equipment of the required type appeared only in the fall of 1942. Such delays in work led to unpleasant consequences for the German army. The 1942 model tank was actually created according to modified technical specifications of the late thirties, which is why it could no longer fully meet the requirements of its time. As a result, no more than one and a half hundred cars were built, after which construction was curtailed due to the lack of noticeable prospects. Thus, the task set by the army was solved, but it happened too late for the full use of the new technology.
Based on materials:
http://aviarmor.net/
http://achtungpanzer.com/
http://pro-tank.ru/
http://armor.kiev.ua/
http://lexikon-der-wehrmacht.de/
Chamberlain P., Doyle H. Complete reference book of German tanks and self-propelled guns of the Second World War. – M.: AST: Astrel, 2008.
Baryatinsky M. Scouts in combat // Model designer. 2001. No. 11. P.32.
This tank was officially called Sd.Kfz.123 PzKpfw II Ausf. L, less often it was called “Luchs” (translated from German as “lynx”). A total of 131 such light reconnaissance tanks were assembled; these vehicles participated in battles until 1945 inclusive. Only two such tanks have survived to this day: one is in the Tank Museum in Saumur, France, the second is in the Tank Museum in Bovington (England). The history of the creation of this vehicle is told in an article by Yuri Pasholok “Scout Cats”, which is complemented by a photo review of a rare tank from the collection in Bovington.
Sd.Kfz.123 PzKpfw II Ausf. L, aka Luchs – general view
Front view: driver's viewing slot with armored visor and the only headlight remaining on the tank after the 1943 modernization
Left view: on the left fender there is a spare parts box with a beam cross (Balkenkreuz)
Back view
Right view
Left drive wheel with removable rims
Left track with road wheels close-up
Left idler and rear fender
Left guide wheel from the inside
Left caterpillar (inside view) and part of the tank bottom
Bottom: corrugated hoses are visible in the hatch
Right track and bottom - inside view on the right
Stern of the PzKpfw II Ausf. L, left view
Luchs exhaust pipe close up
Stern, right side view. Clearly visible mounts for canisters on the starboard side
Right rear fender
Luchs chassis (the brainchild of MAN), right view
Right drive roller close-up
In the frame are the tracks and the right towing eye on the nose of the tank
Engine compartment roof on the stern of Luchs. The photo clearly shows the air intake grilles and the hatch in the rear of the turret, closed with a padlock
The starboard side and turret of the tank, an armored antenna output cup is visible on the turret box
The canister mounts on the side of the turret are an indication that the vehicle belongs to the 9th Panzer Division of the Wehrmacht, more precisely, to the 1st company of the 9th reconnaissance battalion as part of this division
At the initial stage of the Second World War, armored vehicles coped well with reconnaissance tasks in the interests of tank and motorized units of the Hitlerite Wehrmacht. Their use in this role was facilitated by both the extensive road network of Western Europe and the enemy’s lack of massive anti-tank defense (ATD).
After Germany attacked the USSR, the situation changed. In Russia, as you know, there are no roads, there are only directions. With the onset of the autumn rains, German armored reconnaissance was hopelessly stuck in the Russian mud and could no longer cope with the tasks assigned to it. In addition, the situation was aggravated by the fact that around the same time, anti-tank rifles (ATRs) began to arrive in increasing quantities to the rifle units of the Red Army, which made it possible to give the anti-tank defense a massive character. In any case, the German general von Mellenthin noted in his memoirs: “The Russian infantry has good weapons, especially a lot of anti-tank weapons: sometimes you think that every infantryman has an anti-tank rifle or an anti-tank gun.” An armor-piercing 14.5 mm caliber bullet fired from the PTR easily penetrated the armor of any German armored vehicles - both light and heavy.
In order to somehow improve the situation, half-track armored personnel carriers Sd.Kfz.250 and Sd.Kfz.251 began to be transferred to the reconnaissance battalions, as well as light tanks Pz.II and Pz.38(t) were used for this purpose. However, the need for a special reconnaissance tank became obvious. However, specialists from the Wehrmacht Armaments Directorate foresaw such a development of events and initiated such work on the eve of World War II.
In the summer of 1938, MAN and Daimler-Benz began designing a reconnaissance tank, designated VK 901. Formally, it was considered a development of the Pz.II tank, but in essence it was a completely new design. Only the thickness of the armor plates and armament remained similar to the “two” - the 20-mm KwK 38 cannon. The chassis with the so-called “chessboard” arrangement of road wheels was developed by engineer Wilhelm Kniepkampf and consisted of five road wheels per side. The power compartment contained a Maybach HL 45 engine with a power of 150 hp. (109 kW), accelerating a combat vehicle weighing 10.5 tons to a maximum highway speed of 50 km/h.
The prototype was made in 1939. After the completion of field and military tests, it was planned to begin production of the “zero” series of 75 vehicles, which were given the designation Pz.II Ausf.G. However, from April 1941 to February 1942, only 12 tanks of this type were produced.
In 1940, work began on a modernized version of the Pz.II Ausf.G-VK 903. The vehicle received a Maybach HL 66p engine with 200 hp. and ZF Aphon SSG48 gearbox. The maximum speed reached 60 km/h, which is more than enough for a reconnaissance vehicle. In 1942, a version of this tank was created with a turret that did not have a roof, which made reconnaissance surveillance easier. This modification was designated VK 1301 (VK903b).
The Wehrmacht tank forces development program "Panzerprogramm 1941", approved on April 30, 1941, provided for truly fantastic production volumes of the VK 903 reconnaissance tank: 10,950 vehicles were supposed to be produced in the reconnaissance version, 2,738 as self-propelled guns with a 50-mm cannon, and 481 with 150-mm howitzer sIG 33. The VK 903 and VK 1301 tanks received the army designations Pz.II Ausf.H and M, respectively, but their production was not launched.
The Armament Directorate came to the conclusion that it was necessary to develop a new reconnaissance tank, the design of which would take into account the experience of the first years of the war. And this experience required an increase in the number of crew members, a larger engine power reserve, a radio station with a larger range, etc.
In April 1942, MAN manufactured the first prototype of the VK 1303 tank, weighing 12.9 tons. In June, it was tested at the Kummersdorf test site together with the Pz.38(t) tanks from VMM and T-15 from Skoda, developed according to a similar technical specification. During testing, VK 1303 covered 2,484 km. At the same time, the engine and main clutch worked flawlessly.
The VK 1303 tank was adopted by the Panzerwaffe under the designation Pz.II Ausf.L Luchs (Sd.Kfz.123). The production order to MAN amounted to 800 combat vehicles of this type.
Luchs ("Luhs" - lynx) was armored somewhat better than its predecessor VK 901, but the maximum armor thickness also did not exceed 30 mm, which turned out to be insufficient. The welded box-shaped body was divided into three sections: control (also known as transmission), combat and engine. In the front part of the hull there was a driver on the left, and a radio operator on the right. Both had observation devices in the frontal plate of the hull, covered by sliding armor flaps, and viewing slots in the sides. The commander (aka gunner) and loader were located in the tank turret.
The welded turret was larger in size than all previous models of reconnaissance tanks, but unlike the VK 901 and VK 903, the Lukhs did not have a commander's cupola. There were two periscopic observation devices on the roof of the turret: one in the commander's hatch cover, the other in the loader's hatch cover. The latter has at his disposal a viewing device on the right side of the tower. In contrast to all modifications of the Pz.II linear tanks, the turret on the Lukhs was located symmetrically relative to the longitudinal axis of the tank. The tower rotated manually.
The tank's armament consisted of a 20 mm Rheinmetall-Borsig KwK 38 cannon with a barrel length of 112 calibers (2140 mm) and a coaxial 7.92 mm MG 34 (MG 42) machine gun. The gun's rate of fire is 220 rounds/min, the initial speed of the armor-piercing projectile is 830 m/s. An armor-piercing projectile pierced a 25-mm armor plate placed at an angle of 30° from a distance of 350 m. The gunner had a Zeiss TZF 6/38 telescopic single-lens sight with 2.5x magnification at his disposal for firing the cannon. The same sight could also be used for firing a machine gun. The latter, in addition, was equipped with its standard KgzF 2 sight. The ammunition load consisted of 330 rounds and 2,250 rounds. Vertical guidance of the twin installation was possible in the range from -9° to +18°. Three NbK 39 mortars were installed on the sides of the turret to launch 90 mm smoke grenades.
Even during the design of the Lukhs, it became clear that the 20-mm cannon, which was too weak for 1942, could significantly limit the tactical capabilities of the tank. Therefore, from April 1943, it was planned to begin production of combat vehicles armed with a 50-mm KwK 39 cannon with a barrel length of 60 calibers. The same gun was installed on medium tanks Pz.IIl modifications J, L and M. However, it was not possible to place this gun in the standard Lukhsa turret - it was too small for it. In addition, the ammunition load was sharply reduced. As a result, a larger turret with an open top was installed on the tank, into which the 50 mm gun fit perfectly. The prototype with such a turret was designated VK 1303b.
The tank was equipped with a 6-cylinder carburetor four-stroke in-line liquid-cooled Maybach HL 66р engine with a power of 180 hp (132 kW) at 3200 rpm and a displacement of 6754 cm3. Cylinder diameter 105 mm. Piston stroke 130 mm. Compression ratio 6.5.
The engine was started with a Bosch GTLN 600/12-12000 A-4 electric starter. Manual launch was also possible. Fuel - leaded gasoline with an octane number of 76 - was placed in two tanks with a total capacity of 235 liters. Its supply is forced, using a Pallas Mr 62601 pump. There are two carburetors, Solex 40 JFF II. (One production tank Pz.II Ausf.L was experimentally equipped with a 12-cylinder V-shaped diesel engine Tatra 103 with a power of 220 hp).
The transmission consisted of a double-disc main dry friction clutch of the Fichtel & Sachs "Mecano" type, a ZF Aphon SSG48 (6+1) mechanical synchronized gearbox, a driveshaft and MAN type shoe brakes.
The chassis of the Lukhs tank, for one side, included: five rubber-coated road wheels with a diameter of 735 mm each, arranged in two rows; front drive wheel with two removable toothed (23 teeth) rims; guide wheel with a caterpillar tension mechanism. Hydraulic telescopic shock absorbers were installed on the first and fifth road wheels. The caterpillar is fine-linked, double-ridged, 360 mm wide.
The Lukhs were equipped with a VHF radio station FuG 12 and a shortwave radio station Fspr "f".
Serial production of reconnaissance tanks of this type began in the second half of August 1942. Until January 1944, MAN produced 118 Lukhs, Henschel - 18. All of these tanks were armed with a 20-mm KwK 38 cannon. As for combat vehicles with a 50-mm cannon, it is not possible to indicate their exact number. According to various sources, from four to six tanks left the factory floors.
The first serial "Luhs" began to enter the troops in the fall of 1942. They were supposed to equip one company in the reconnaissance battalions of tank divisions. However, due to the small number of vehicles produced, very few Panzerwaffe formations received new tanks. On the Eastern Front these were the 3rd and 4th tank divisions, in the West - the 2nd, 116th and Training tank divisions. In addition, several vehicles were in service with the SS Totenkopf tank division. Lukhs were used in these formations until the end of 1944. During combat use, the weakness of the tank's weapons and armor protection was revealed. In some cases, its frontal armor was reinforced with additional armor plates 20 mm thick. It is reliably known that a similar event was carried out in the 4th reconnaissance battalion of the 4th tank division.
Two examples of the Pz.II Ausf.L "Luhs" light tank have survived to this day. One is in the UK, in the Royal Tank Corps Museum in Bovington, the other in France, in the tank museum in Samur.
The Luchs is a Tier 4 German light tank that is found in the branch leading to Leopard 1 via Ru 251. The Luchs is often referred to by players as "Luch", although strictly speaking the name of this vehicle is translated from German as "Lynx". In general, there are several interesting light tanks at low levels, and Luchs is one of them. The full name of this tank is Pz Kpfw II Luchs.
Best Dynamics
Perhaps the main characteristic for a light tank is dynamics. Luchs in this regard is one of the best cars in its class in general. If the maximum speed of 60 km/h is difficult to surprise anyone (although this is a very good indicator), then the specific engine power is almost 28 hp. per ton makes a real racing car out of a tank.
Luchs is a standard "firefly" and can effectively illuminate both passively and actively.
Luchs reaches top speed almost instantly and maintains it even on gentle inclines. At low levels there are relatively few experienced players who can hit moving targets well, so in some battles you can run at full speed in front of several enemies and rarely take damage. This is also greatly facilitated by the small size of the Luchs; it is a rather miniature machine and is not so easy to hit.
Naturally, there is no need to talk about any booking given such dynamics. Luchs can easily be penetrated by third-level enemies, for example, it has only 30 mm in the front of the hull, and there are armor plates that are located with virtually no inclination. There is 50 mm in the front of the turret, but there is practically no tilt, so occasionally only the gun mantlet can deflect low-level enemy shells.
Tools for the top
In the top configuration there is a choice between two guns: 39 L/60 and M.K. 103. Don’t look at the difference in level: in World of Tanks, the level of modules (including guns) is a formality and means little. The 39 L/60 is the standard gun for this class and level: 67 mm penetration with a conventional projectile and 130 mm with a “gold” sub-caliber. The one-time damage is 70 units.
There is no need to talk about any booking. Luchs is easily penetrated by third level enemies.
But the rate of fire is high (24 rounds per minute), so you can quickly send same-level enemies into the hangar. The accuracy is by no means the best in the game (0.4), but for low levels it is ok. For such a caliber, the weapon is not brought down very quickly (2.3 seconds).
M.K. 103 is much more interesting, since this gun is equipped with a loading drum for 5 cassettes (this is for a top turret; if you install a stock one, there will be only 4 cassettes). Moreover, each cassette contains two shells with damage of 30 units each. It is easy to calculate that the damage from the entire drum is 300 units, while the recharge inside the drum is about 0.14 seconds. Luchs can deal 300 damage in less than a second, and this is at level four!
Naturally, this is compensated by a simply gigantic spread (0.5). The alignment for a gun with a loading drum is quite fast (2.1 seconds), but everything is spoiled by the terrible stabilization of the gun. The main problem is that the shells from one cassette fire one after another, so the second shot turns out to be extremely inaccurate. In fact, you can confidently inflict damage only when shooting at point-blank range; even at medium distances, half of the shots are almost guaranteed to miss.
Characteristics of Luchs
But penetration with a regular projectile is as much as 95 mm (110 mm for a sub-caliber projectile); some fourth-tier tank destroyers have only slightly higher penetration. The recharge of the entire drum is 18 seconds, during which time you are defenseless. Of course, the choice of weapon depends on personal preferences, but the M.K. weapon is much more interesting. 103, with it Luchs becomes extremely dangerous in close combat and can almost instantly send some opponents to the hangar.
In battles with third, fourth and even fifth levels, Luchs can be a good damage dealer.
The safety margin is 340 units; naturally, due to weak armor, it runs out very quickly. The visibility of 360 meters is good for this level. The vertical aiming angles are very pleasing: the gun goes down 8 degrees, this is a very pleasant surprise when compared with the vast majority of other German vehicles. The ammunition is very spacious, so you definitely won’t be left without shells.
Luchs is a worthy machine, thanks to its high dynamics, miniature size and M.K. gun. 103.
Overall, the Luchs is a fairly standard firefly and can effectively shine either passively or actively. This is supported by both its small size and excellent dynamics. Passive light means that you stand in some bush and shine from there, without your opponents seeing you. Active light represents active movement across the battlefield. Opponents see you, but it is difficult to hit you due to your high speed.
But in battles with third, fourth and even fifth levels, he can be a good damage dealer. The 39 L/60 gun is well suited for firefights at close and especially medium distances. The gun is M.K. 103 is effective exclusively in close combat, but 300 units of damage and high penetration can send opponents to the hangar literally in a second. High dynamics allows you to ride out to the enemy from the flank, inflict damage and quickly hide for a rather long reload of the drum, before members of the enemy team have time to react.
Additional equipment and crew
When it comes to choosing equipment, there are options. The rammer cannot be installed on Luchs due to the M.K. cannon. 103, which is equipped with a loading drum. Visibility is improved by coated optics and a stereo tube; it is advisable to take both modules; in some battles passive light is preferable, in others active light is preferable. For the remaining slot, you will have to choose between enhanced aiming drives, improved ventilation and a camouflage network. In general, the bonus from ventilation is hardly noticeable, a camouflage net is not really needed on a light tank (if you are standing behind a bush, then even without a net they will only be able to notice you if they approach you point-blank), so aiming drives are the optimal choice.
Luchs are not very suitable for beginners in World of Tanks, like the light tank class in general, although this tank is not that difficult to master...
The crew composition is non-standard, it includes four people, but there is also a radio operator, and the commander also performs the functions of a gunner. As with any light tank, the most important perks for Luchs are camouflage and sixth sense. The second one you can take is “combat brotherhood”. The radio operator has an extremely useful “radio interception” skill.
conclusions
Luchs is a worthy machine, thanks to its high dynamics, miniature size and M.K. gun. 103. You just need to get used to a special style of play. Damage of 300 units is simply huge for the fourth level, but to inflict it you need to approach the enemy almost point-blank, and then hide for a rather long reload of the drum. Therefore, Luchs is not very suitable for beginners in World of Tanks, as is the light tank class in general, although learning to play it well is not that difficult.
Post Views: 1,659
