Electrolux washing machine icons instructions for use. Washing modes in the Electrolux washing machine

Domestic boilers are often installed in private homes and country houses for heating. Device Russian production KChM-5 works on solid fuel. This universal unit with an unusual design is produced at the Kirov plant. The main material used in its manufacture is very durable and reliable cast iron. Specifications KChM-5 differs from other units.

Durable and reliable boiler, as it is made of durable cast iron

Main characteristics

The main feature of the boiler is that the heat exchanger in it consists of separate sections, whereas in other devices it is solid. The more sections, the higher the power of the unit. Another interesting detail in the technical characteristics of the KChM-5 boiler is its versatility. The device runs on solid fuel, but if necessary, it can be converted for heating with gas, fuel oil, waste oil or diesel.

Using a pellet burner and a hopper with an auger, you can create an automatic long-burning pellet unit. You can easily install such a boiler in a room where main gas has not yet been installed. Until then, the device will operate on other types of fuel.

In this video you will learn more about the KChM-5 boiler:

The device consists of sections, the lower of which is connected to the return line heating system, and at the top there is a pipe for connecting a straight line. On the front wall there is a loading, blowing and screwing door. The first has openings for secondary air flow. Using the ash pan door you can adjust the flame intensity. This is done manually using a draft regulator or a special screw.

The chimney pipe is attached to the back, and a damper is attached to it. It controls the release of smoke and combustion products. The body of the KChM-5k boiler is covered with a special material that increases operating efficiency and reduces heat loss. The unit is also equipped with a thermometer, which is necessary to prevent the liquid from boiling. Technical characteristics of the KChM boiler:

• power - from 21 to 80 kW;
• the area that the device can heat is 210-800 square meters;
• coefficient useful action exceeds 78%;
• fuel consumption - from 3.3 to 12 kg/hour.

All indicators depend on the number of sections; there can be from three to nine.

Advantages and disadvantages

Before purchasing a unit, you need to find out about its advantages and disadvantages. In addition to the fact that the boiler is low in cost, it has a number of other advantages. Among them are:

• service life - 25 years;
• additional equipment allows you to quickly convert the boiler from one fuel to another;
• thanks to its simple design, the unit is easy to clean, repair and replace damaged parts;
• a sectional heat exchanger makes it possible to create a large range of capacities;
• The features of the device and thermal insulation increase the efficiency of the equipment even when using wet firewood (humidity should not exceed 20%).

The optimal fuel for the device is anthracite coal, the diameter of which ranges from 4-6 cm. Operating efficiency decreases when using wet flammable materials.

The disadvantage is that the KChM-5 has a significant gas and coal consumption, while one load of fuel allows the boiler to operate for a short time. If we compare this model and pyrolysis devices, the latter have a number of advantages. Lack of efficiency entails the need to periodically clean the internal surface of the device. You also need to properly organize the chimney, otherwise combustion products will enter the room.

Connection conditions

There are certain requirements for installing and connecting the boiler. Compliance with them will extend its service life and make operation comfortable and safe. The unit must be placed in the room so that the distance from its rear to the wall reaches 25 cm, and from the side walls - 10 centimeters. Periodically during repairs you will need to approach the rear surface, so leave 400 mm between one side and the wall. You need to leave a space of 1 m² in front of the boiler, which will allow you to easily add new fuel and clean the ash pan.

Cast iron solid fuel boiler KChM-5 “Combi” designed to work with gaseous, liquid and solid fuel. Boiler KChM-5 “Combi” has a Permit Federal service on environmental, technological and nuclear supervision. Cast iron water heating boilers of the KChM-5 type have a number of advantages. First of all, they differ more long term cast iron heat exchanger service. The design of the KChM-5 “Combi” boiler has been tested for years; each stage of production of the boiler components is strictly controlled. Boilers of this series are unpretentious in terms of fuel and coolants, and are also quite easy to maintain. KChM-5 "Combi" boilers have low requirements regarding smoke draft. If there is a need to switch from one type of fuel to another, the boiler can be converted quite easily. It has a higher operating pressure compared to similar boiler models of other brands.

The KChM-5 "Combi" cast iron heating boiler is assembled from the front, rear and middle sections. The power of the boiler will depend on the number of middle sections. The screeding, ash pan and loading doors are located next to the cover for cleaning the convective surfaces of the chimney on the front section of the KChM-5 “Combi” boiler. In order to convert the boiler to a different fuel, it is necessary to use a set of equipment from the same manufacturer. The flanges with which the boiler is connected to the heating system, as well as the chimney pipe, are located on the rear section.

Advantages of cast iron boilers KChM-5

• Long service life of the cast iron heat exchanger.
• Proven design and well-developed production technology on molding lines with constant quality control during the production process.
• Ease of maintenance, unpretentiousness to fuel and coolant
• Low smoke draft requirements
• The KChM-5 boiler can be easily converted to operate on different types fuel
• Higher operating coolant pressure compared to similar boilers of other brands

Technical characteristics of the KChM-5 "Combi" boiler

The signs on the control panel of an Electrolux machine are not clear to everyone. On some models there is the name of each program, on others there are only symbolic images.

What if you need to select a specific function for a specific type of laundry? You can look at the instructions. But if it is lost or you bought a used washing machine, you will find the meaning of each SM Electrolux washing mode in our article.

Electrolux program table: description and designations

It is not recommended to select a specific mode at random. It is better to immediately read the description of the designations and then begin operation. In the table below you will find the names and explanation of the main and additional modes for the Electrolux washing machine. All symbols on different Electrolux models are interpreted the same way.

Basic modes

*The data in this and the following tables are approximate; exact time see the instructions for your model.

There are also indicators on the panels of Electrolux washing machines. With its help, it is convenient to determine the end time of the cycle (on the display) or the operation of one of the functions (the indicator lights up). An audible signal warns that the wash is finished and the laundry can be removed from the tub.

Additional programs

To additional in in this case These include those modes that allow you to care for certain types of laundry.

Useful features

The Electrolux washing machine also provides other useful functions that will make washing even more efficient.

How to choose a washing mode in an Electrolux machine

The choice of program depends on the type of fabric, as well as the type of laundry. To know how to configure and set the mode, just look at the control panel.

Turn the selector to set the program according to the type of fabric. Temperature, spin, additional rinse are selected by pressing the keys. The spin speed indicators show the spin speed. The washing time depends on the selected mode.

Net service centers RemBytTech repairs Electrolux EWT 9120 washing machines at home. Our teams of craftsmen are distributed throughout all regions of Moscow and some cities. Even if you live in the region, you won’t have to wait long for a specialist and overpay per km from the Moscow Ring Road. The RemBytTech technician will come to you within 24 hours of your request and repair your faulty washing machine with a warranty of up to 2 years, depending on the type of breakdown.

Prices

What the cost of repairing your washing machine will be depends on the type and complexity of the breakdown. It is impossible to accurately predict in advance. Only after performing the diagnostics will the technician be able to accurately answer this question. In the meantime, you can familiarize yourself with the approximate prices for our services for this brand of washing machines.

* In case of refusal of repair, you must pay 400 rubles. for a technician’s visit and diagnostics

** The price includes ONLY WORK on repair or replacement of parts, spare parts are paid separately

How to call a specialist

To call a specialist, call the RemBytTech workshop by phone:

7 (495) 215 – 14 – 41

7 (903) 722 – 17 – 03

or send from the site. When applying please indicate:

• Make and model of the washing machine.
• Nature of the failure. For example, the washing machine breaks down, leaks, or water remains in it after washing.
• A convenient time for the technician to arrive.
• Name, address, telephone.

On the appointed day of repair, the technician will contact you to re-confirm the arrival time.

If washing Electrolux machine EWT 9120 is out of order - don’t hesitate to repair it! Don't wait until the breakdown becomes beyond repair. It’s better to call “RemBytTech” right away! Our technician will come to you within 24 hours of your call and repair your washing machine with a guarantee of up to 2 years.