Homemade gun made of wood that shoots nails. A simple gun that shoots rubber bands

There will always be a place in the world resourceful people imaginative and experimental. It is thanks to such curious experimenters that very useful things sometimes come into being, often assembled from improvised means. With your own hands you can make beautiful crafts to decorate your home, as well as various stands, shelves, vases, even from old things.

However, today we will talk about how to do homemade pistol at home. Some people are only interested in this out of curiosity, and sometimes attackers have a similar goal. Of course, this requires prior knowledge of the general design of the pistol and its parts.

How to make a gun

Thus, industrially manufactured pistols are subject to mandatory technical documentation requirements for each individual type of weapon. Documents for weapons indicate such characteristics as ballistic properties, reliability of the weapon, and what degree of threat it poses to the owner. The weapon itself is manufactured using specialized equipment.

Assembling a pistol

So how did it become possible to make a pistol with your own hands at home? There are many proven methods for this, namely:

• you can make each individual part for the gun yourself;
• you can assemble a pistol from disparate parts, while some parts can be manufactured either industrially or independently;
• you can remake a finished pistol, most often this is done to add existing weapons necessary properties that will change its original purpose;
• You can also remake individual devices and get a very real firearm (for example, air gun, starting, construction and installation).

How to make an ignition

Most often, a pistol is made at home from those parts and tools that are at hand based on ready-made drawings. There is no need to talk about any documentation, specialized equipment, and especially safety precautions in such conditions.

So, “ignition” is a real homemade product, which is assembled from such basic parts as a barrel, handle, fasteners, as well as many other parts. It depends on the wishes of the master himself. To make “ignition” we choose a thick-walled steel pipe with a diameter of no less than 8 and no more than 20 mm. In order for the gases to flow through the pipe in the same direction, the end of the pipe can either be flattened or welded, and sometimes it becomes necessary to tighten the end of the pipe with a bolt, cutting a thread inside the steel pipe.

The handle should be such that it is comfortable to hold in your hand when shooting. As a rule, it is most often made of wood. To do this, a cutout is made under the circular-shaped barrel on the handle itself. The barrel is attached to the handle using metal plates. In such a pistol, match sulfur is usually used as a charge, and bullets are replaced by any available items, for example, balls from a set of bearings.

Now it is clear that making a pistol is quite possible for any person interested in this topic, and does not cause any particular difficulties. It is only important to remember that by making weapons at home, a person automatically exposes himself and his loved ones to danger. Under no circumstances should a gun be given to children. And also try to follow safety precautions!

How to make a gun out of paper

There are plenty of homemade crafts in various ways assemble a pistol with your own hands from scrap materials. You can even make a gun out of a clothespin or wooden pistol. To do this, look on the Internet for a video on how to make a pistol. You can also watch videos on how to make a pistol from Lego, a pistol from a pen, and even how to make a pistol from wood. If you want to do something interesting in free time, you are invited to make a paper pistol that also shoots. So, first you need a regular sheet of paper, scissors, an eraser and any adhesive tape.
Do not under any circumstances make or take a gun with you to work or school! This can lead to extremely unpleasant consequences!

How to make a paper gun

Step 1
First of all, we make the handle. We place a sheet of paper horizontally in front of us and bend it at the bottom by 3.8 cm. Thus, wrapping the paper around the first bend, we continue to bend it until the paper folds into a tube measuring 3.8 cm. Next, to connect the two edges of the sheet, and also along long side, you need to glue them with tape. Then fold the sheet in half. And in the center you need to make a sharp bend.

Repeat all steps from the beginning. Only now make two parts measuring 2.5 cm and 1.3 cm.

Bend the handle. To do this, bend a 4 cm piece in the center so that the bend is visible. Next, you need to measure 2.5 cm from the center on both sides of the edges, and use these marks to bend the sheet so that its edges meet under the central fold point at the bottom.

At this stage you need to make a slot for the trigger. Cut a 1.5 cm long slit in the central bend. You only need to cut off a small amount. To make cutting easier, make the opposite fold from the center fold.

Now fold the paper along the central fold so that the corner parts are aligned with each other. This is the frame of the gun that will house the hammer and barrel.

To insert the barrel, thread a 2.5cm strip through either side of the curve of the handle. Check that both ends pass through the handles correctly. The whole design should look like a pistol.

To cut the trigger, cut a small piece from the back of the gun. This will hold the trigger.

And the last step is to take the elastic band and stretch it from the barrel of the gun to the end. The elastic should be 1 cm above the corner of the strip and behind the slot itself. If the elastic does not hold well in front of the barrel, make a small cutout in the front in which it will be located. Also note that the paper may wrinkle as you put the rubber band on. To prevent this from happening, glue two rods to the sides to strengthen the trunk.

Finally, you can make origami paper – shuriken bullets. Just place the corner of the shuriken between the halves of the barrel near the trigger. During the shot, the rubber band should catch and send the shuriken flying!

Weapons in the Philippines

In the Philippines, this place is called the “city of weapons.” For more than a century, Danaoans have made their living by manufacturing weapons. These people know how to assemble pistols, revolvers and machine guns by hand. The authorities created a cooperative in order to legalize the production of weapons. But instead of making money through legal means, most collaborate with the local mafia.

Jose takes the gun in his hands and looks into the sight. He thinks for a moment, and then places the mold in a vice, which is on this moment is nothing more than a semblance of a future pistol, a piece of metal. José Arnescar will have to spend many days at work before this form takes its form. firepower. This muscular 33-year-old worker puts all his strength into working on the bolt. “This is the hardest part,” he says breathlessly. “It will take at least a week to complete the work.” This is the most important part of the weapon, so Jose will only use a file in his work.

We are located in the world's largest gun manufacturing cooperative, located in Danao on Cebu Island in the heart of the Philippines. This organization is unique in its essence; it is here that 38 and 45 caliber weapons, pump-action shotguns and even some models of machine guns are produced. 90% of the total production volume is produced manually.

In this huge old room there are only a few machines, its roof is leaky and does not protect from rain, which is why fabric is hung on top to protect the electrical wiring. There is such noise in the dimly lit room that you feel like you are in a mountain tunnel.

About 30 workers can work and modify their weapons on 2 main machines. Using a drill, each item is engraved with “WORLD” and a serial number. There is another large machine, which is considered the most important in the work; it produces drums. “This is the most important machine,” says June, watching his colleague finish his part of the job. “Thanks to it, we can do work that would be very difficult to do by hand.” “We don’t have many tools,” the worker says with regret in his voice.

In this production, each worker independently creates a weapon from start to finish, and after the sale receives almost the full cost in hand. Mostly 38 and 45 caliber weapons are produced here, as well as pump-action shotguns. It takes a week to make a 38 caliber pistol that can be sold for 30 euros; a 45 caliber pistol takes twice as long to produce, but its price also increases. The workers of this cooperative receive an average of 70 euros per month, which is the minimum wages in the Philippines. Nearly 100 guns come out of these workshops every month, most of them ordered by police and soldiers who are not issued weapons on the job and for whom this is the cheapest way to get one. This weapon is also in demand among store and bank security guards.

Weapon making is considered an old tradition in Danao. They say that even under the Spaniards, arquebuses were made here. But the main production was formed at the beginning of the 20th century, when the Philippines was an American colony. During World War II, the Americans used the skills of the Danaans to convert captured Japanese weapons to their own caliber. It is from those times that hand-made weapons have been produced here.

As a result, in 1996, the authorities organized a legal cooperative for the production of weapons. But, despite all the efforts of the authorities, the majority of workers produce weapons illegally, not obeying the cooperative.

Finding such illegal production is not difficult. In the city center you can find the small house of Renato Gonzalez. Its entire production consists of a simple vice and a set of tools. In his workshop you can see the mold for the KG-9, a lightweight machine gun similar to the Israeli-made UZI. It took Renato 2 weeks to produce it, and he received 100 euros for the work. The 52-year-old worker learned his skills from his grandfather and father, who were also involved in the production of weapons. “I was 8 years old when I started helping them,” recalls Renato. - I was returning from school and learning to work with a file. I'm doing this now so my kids can go to college."

According to Nestor Sabaiton, who led the cooperative until 2007, at least 5,000 people produce weapons illegally in Danao.

Naturally, there must be a person who would supervise these illegal workers. In Danao, this man is called "Rio Shark", he is one of the most experienced weapons manufacturers. In his workshop you can see a finished AR-15 automatic rifle, which is very reminiscent American rifle M-16. This weapon, worth 500 euros, was ordered by the mayor of a large neighboring city. “This is the second time I have received an order to make something like this,” says Rio. His son adds: “We had a lot of orders just before the election. A lot of politicians wanted pistols or rifles like this.”

Local elections in the Philippines have a bad reputation. For example, in 2007, 114 candidates and party members were killed during the election campaign. In addition, bank robberies are often accompanied by murders. In May 2008, there was a high-profile robbery during which the perpetrator shot and killed 10 people. There are believed to be over a million units in circulation in the Philippines firearms, while a third are unlicensed.

Despite the similar situation in the country, everything is calm in the Danao police stations. In 2007, only 2 people were detained for illegal production and 18 for illegal possession of weapons. “We know that there are several illegal gun manufacturers in the city,” says Lt. Lacson Dehino, “but when we find them, we try to encourage them to join the cooperative, and if they refuse, they will be arrested.”

The illegal arms business does not seem to disturb the tranquility of Danao, where 120,000 residents lead a normal life. So a resident of Danao says with humor: “If you hear shots on the streets of Danao, it’s okay, it’s just one of the masters testing his new weapon in action.”

Sometimes there comes a moment in the relationship between father and child when all the games and entertainment are practically running out. You have to rack your brains to find new forms of leisure in order to captivate your child as much as possible and not let him get bored. In such cases, the Internet or special printed publications, in which it is collected huge base games for every taste and taking into account age characteristics.

How to make a gun from wood

One of the proven ways to engage a child can be military sports games, such as fresh air, and within a house or apartment. Moreover, most interesting game it will be if everything necessary equipment and make your own ammunition.

The key element in this type of game is weapons, and in particular all kinds of pistols and machine guns. You can use weapons purchased in a store, but the most exciting and interesting thing will be to make a pistol from wood with your own hands. This activity can interest the child and contribute to the development of new skills and abilities. At the stage of preparation for the game, the question may arise about how to make a pistol out of wood. You don't need any supernatural abilities to do this. The whole process will not seem overly complicated.

Necessary materials

To do this, you will need some tools and materials that can easily be found at home or in the country: a board made of non-solid wood, a ruler, a pencil or pen, a plane, a hacksaw, a file, a vice or clamps, a wood burning machine, sandpaper and varnish. This will be quite enough to make a homemade pistol made of wood.

Some stages in the process of making a toy can be done by a child. Direct participation in the process of making a pistol will not allow him to get bored.

Another important and desirable point in making homemade weapons is a drawing of a pistol made of wood. You can easily find it on the Internet or draw it yourself, taking into account all the wishes for the future product.

Making a pistol

On initial stage You should take an existing board and select an area on it without knots, holes or damage. Optimal thickness wood material should be 30-40 mm. It is desirable that the wood is sufficiently dried, which will make it easier to sand at the final stage. Using a hacksaw, you need to cut out the required workpiece and carefully process its surface using a plane and sandpaper. The thickness of the board should be the same throughout its entire thickness.

Drawing selection

Having decided on the model and parameters of the pistol, you need to make a drawing of it or modify the existing one, taking into account all the nuances and wishes. It is possible to use illustrations or photographs of the weapon you like to recreate the smallest details as much as possible. You can turn to specialized forums, where they can tell you how to make a wooden pistol as similar as possible to the original.

The next step will be this: you should transfer the image of the previously made drawing to the existing workpiece, preserving all the parameters and dimensions and taking into account all the smallest details and features of the future pistol. To make it convenient to cut a wooden workpiece, it can be secured in a table vice or using clamps. This will greatly facilitate the process of making a pistol. It is worth cutting out parts not strictly according to the applied contour, but with a little margin for finishing.

Workpiece processing

Using a file, sandpaper and a knife, it is necessary to give the product all the inherent features of a weapon, highlight all the necessary and distinctive design details, and identify the key elements of a real pistol: trigger, front sight, butt. At the final stage of processing the workpiece, a mock-up should be obtained that exactly resembles a real pistol and corresponds to the image in the drawing. The greater the similarity, the more pleasant it will be to hold such an object in your hands.

The final stage

Using sandpaper of varying degrees of coarseness, remove all unevenness and roughness and sand all sharp corners.

The presence of a grinding machine or machine can speed up the process of final processing of the workpiece. Some details can be highlighted using a wood burning device. At the final stage, to give a more aesthetically pleasing finished look, the toy should be coated with several layers of dark varnish and allowed to dry thoroughly. To add shine and gloss, the product can be polished with wax.

By doing this activity with your child, you will not only promote bonding, but also teach him how to make a gun out of wood. In the process of processing wood material, you can acquire some skills that earlier child did not possess. And, without a doubt, it is very nice to have something made with your own hands.

A pistol made of wood... How many childhood memories are there in this combination of words... Memories of how very young boys and girls chased each other, imagining themselves as robbers and those who caught them. The robbers “shoot” from the simplest toys made of simple wood; they became the first pistols, the first toy weapons made with their own hands. This article will discuss how to make a pistol from wood.

Making weapons is not just a children's dream

If in childhood you simply took a piece of wood that was suitable in shape, now you can use special tools and make a toy that is practically no different from a real weapon. If you build the gun correctly, it will even be able to fire. made of wood can please not only boys, but also their fathers.

Let's start production

To make a “weapon” you will need: a piece of rubber drill with a drill no larger than 6 mm, a well-sharpened knife, a saw, a file, sandpaper, a knitting needle or a nail of the same length. To understand how to make a pistol from wood, it is worth knowing that the design of this product is divided into three elements: solid handles and barrel, pistons and rubber bands.

First of all, you will need to make the barrel and handle of the gun. They need to be cut out of wood, the thickness should be at least 2 cm. You can choose any shape.

The main thing is that you like it and be comfortable. Don’t throw away the rest of the block, you will need it later.

We continue to answer the question of how to make a gun from wood. In the finished trunk, use a drill to make a hole along the entire length. Sand the hole made thoroughly with sandpaper. To do this, you need to roll the paper into a tube and put it on a suitable stick; either a long nail or a knitting needle will do. From the remaining piece of wood you need to make a piston. It looks like a long wooden stick, slightly less than 6 mm in diameter. There should be a slight thickening on one part of the piston. This end will be called the sear. The piston itself must be the entire length of the barrel and freely enter and exit it. You need to attach an elastic band to the thickening. It or the tape must be cut from a piece of a bicycle inner tube. Instead of a wooden rod, you can simply take a long nail. His hat will serve as a sear. The nail itself must be cut to the length of the barrel, and the cut area must be sanded well with a file to completely dull it.

The finished piston is placed in the barrel of the pistol, while at the same time it is necessary to pull the rubber band onto the handle of the weapon. The sear will need to be adjusted so that when it is pulled back, the trigger is raised. You should also make sure that it can catch on the protrusion on the pistol handle. At the same time, the piston will be firmly fixed in the cocked state. The DIY gun made of wood is ready.

We fire a training salvo

You need to shoot from such a design in this way: take the pistol in your hand, thumb At the same time, the hands push the sear upward, it slides and moves the piston along the barrel. If you don’t know how to make a gun out of wood, then this article should help you achieve excellent results.

How to make a shooting pistol?

It is absolutely possible to make a shooting pistol different ways and from all kinds of materials. A lot depends on the time you are willing to spend on work and on your imagination. It will be easier to follow these instructions if you have an understanding of the pistol's design. You can learn about the main components of a pistol from our article. Below are several ways to make a gun that will shoot rubber bands, paper or bullets.

A gun that shoots rubber bands

Materials

You will need:

• 3 wooden barbecue skewers or plywood stick 200*10*5 mm;
• 3 wooden clothespins;
• 2 plastic clothespins (can be replaced with wooden ones);
• stationery erasers;
• scissors or knife;
• glue gun or wood glue.

Gun manufacturing process

The technology for making a gun that shoots rubber bands is shown in this video.

Pistol that shoots bullets

This original toy can be made within a few minutes, and you can use crumpled paper, plastic balls and even marshmallow pieces as bullets.

Materials

To make such a pistol you will need:

• polyvinyl chloride pipe - 55 cm, diameter 2 cm;
• 2 PVC corners of suitable diameter;
• 2 PVC tees of suitable diameter;
• 2 PVC plugs of suitable diameter;
• scissors for cutting PVC pipes or a sharp knife;
• tape measure or measuring tape;
• soldering iron for PVC pipes.

Build process

A special soldering iron is used to solder pipes, but some craftsmen heat the ends of PVC products over an open fire and then connect them. The disadvantage of the latter method is that if it is not calculated correctly and overheated, the edge of the pipe will melt, and this can reduce the internal diameter of the workpiece. Therefore, it is better to practice a little beforehand.

The gun is ready. The bullet is inserted through the barrel. To fire a shot, grasp the pistol by the handles and blow into the “trigger” hole. The firing range from such a pistol can reach several meters.