Gas boiler room operator's shift log. Boiler room operator's shift log

Quantity:

In stock

X
You ordered a thin magazine again.
Perhaps you need a magazine with big amount pages and other characteristics.
Please use calculator

Article: 00204190
Year: 2019
Format: 297x210
Binding: Paperback
Bonding method: Clip

Setting up a block of pages

Show ▼

Pages: 10 (sheets: 20) (Recommended 60 pages )

Select number of pages

Paper density: ?

48 gr./sq.m- thin, inexpensive paper with a slightly grayish or woody tint. Used for printing newspapers or similar products. It has low density and, accordingly, low wear resistance. The advantage of this paper is its low price.

65 gr./sq.m- bleached paper. Widely used in printing books, magazines, etc.

80 gr./sq.m- bleached paper. Used for printing books, magazines, etc. Used in household printers. The strength of this paper is significantly higher than the previous two types of paper. It is recommended to order magazines from this paper for production (dust, dirt), catering units (wet hands), etc.




Number, lace, seal: ?

You receive printed products numbered, laced and prepared for sealing in accordance with current regulatory documents:

The cost of lacing and fastening is 45 rubles.



9 out of 10 customers order lacing and sealing
And 7 out of 10 additionally order page numbering


?

Page numbering starts from the title page to the last page of the magazine. Page numbers are located in the lower corners of the magazine.


?

The magazine block is punched through two holes with a diameter of 6 mm, which are located at a distance of 80 mm from each other, from the spine side in the middle of the magazine.


?

The magazine is laced with a special lavsan thread threaded through the holes of the hole punch. Secure with a cardboard insert and a printable sticker.



Setting up the cover

Show ▼

Sewing-adhesive bonding ? Sewing binding

(makes binding more durable)

Sewing binding During the manufacturing process, printed sheets are used that are folded, assembled with notebooks and stitched together with threads, which gives the block high strength. Next, this block is inserted into the binding cover. (One binding cover is used, consisting of 2.5 mm cardboard covered with paper vinyl). Then the block is connected to the lid using a flyleaf - a sheet of paper. A captal is glued to the upper and lower parts of the spine of the block for visual beauty and completeness of the product.

Emboss on the cover: ?

The name of the magazine is completely transferred by embossing to the cover; gold foil is mainly used (but silver, blue, and red are also available). You can emboss: the name of the organization, logo, any combination of letters, numbers and drawings.

The cost of embossing work is 80 rubles.


If you have uploaded your company logo, we can emboss it along with the magazine name




Number, lace, seal: ? According to the Decree of the Government of the Russian Federation of April 16, 2003 N 225 “On work books” Receipt and expense book for accounting forms work book and an insert in it And book of movement of work books and inserts in them must be numbered, laced, certified by the signature of the head of the organization, and also sealed with a wax seal or sealed.

More about softcover Softcover- one of the most inexpensive and quickly produced bindings.

The binding cover is made of thick paper with a density of 160 g/m2; at your request, the cover can be laminated.

After the cover is ready and the block is printed, they are fastened with a paper clip, and if there are more than 60 pages in the block, then the bonding is carried out using a hot-melt adhesive machine.

Soft binding due to ease of execution and affordable price is the most popular and one of the most affordable types of binding.

Cover color: white

Laminate the cover: ?
Lamination- This is the coating of printed products with film. Lamination will preserve the attractive appearance of printed products for a long time and reliably protect them from contamination and mechanical damage. We carry out single-sided and double-sided lamination up to A1 format using special devices - laminators. The main purpose of hot lamination is to protect the image from various external influences, which may include spilled coffee, all kinds of attempts to wrinkle, scrape, scratch the image, wet cleaning of premises, rain, snow. But experienced users also know about another valuable property of lamination: it can significantly improve image quality. When using glossy films, the image “appears” and the colors become more contrasting and richer. The "develop" effect gives inexpensive laminated paper the appearance of luxurious photo paper.

Quantity:

In stock

X
You ordered a thin magazine again.
Perhaps you need a magazine with more pages and other features.
Please use calculator

Article: 00817774
Year: 2018
Format: A4 horizontal
Binding: Paperback
Bonding method: Clip

Setting up a block of pages

Show ▼

Pages: 10 (sheets: 20) (Recommended 60 pages )

Select number of pages

Paper density: ?

48 gr./sq.m- thin, inexpensive paper with a slightly grayish or woody tint. Used for printing newspapers or similar products. It has low density and, accordingly, low wear resistance. The advantage of this paper is its low price.

65 gr./sq.m- bleached paper. Widely used in printing books, magazines, etc.

80 gr./sq.m- bleached paper. Used for printing books, magazines, etc. Used in household printers. The strength of this paper is significantly higher than the previous two types of paper. It is recommended to order magazines from this paper for production (dust, dirt), catering units (wet hands), etc.




Number, lace, seal: ?

You receive printed products numbered, laced and prepared for sealing in accordance with current regulatory documents:

The cost of lacing and fastening is 45 rubles.



9 out of 10 customers order lacing and sealing
And 7 out of 10 additionally order page numbering


?

Page numbering starts from the title page to the last page of the magazine. Page numbers are located in the lower corners of the magazine.


?

The magazine block is punched through two holes with a diameter of 6 mm, which are located at a distance of 80 mm from each other, from the spine side in the middle of the magazine.


?

The magazine is laced with a special lavsan thread threaded through the holes of the hole punch. Secure with a cardboard insert and a printable sticker.



Setting up the cover

Show ▼

Sewing-adhesive bonding ? Sewing binding

(makes binding more durable)

Sewing binding During the manufacturing process, printed sheets are used that are folded, assembled with notebooks and stitched together with threads, which gives the block high strength. Next, this block is inserted into the binding cover. (One binding cover is used, consisting of 2.5 mm cardboard covered with paper vinyl). Then the block is connected to the lid using a flyleaf - a sheet of paper. A captal is glued to the upper and lower parts of the spine of the block for visual beauty and completeness of the product.

Emboss on the cover: ?

The name of the magazine is completely transferred by embossing to the cover; gold foil is mainly used (but silver, blue, and red are also available). You can emboss: the name of the organization, logo, any combination of letters, numbers and drawings.

The cost of embossing work is 80 rubles.


If you have uploaded your company logo, we can emboss it along with the magazine name




Number, lace, seal: ? According to the Decree of the Government of the Russian Federation of April 16, 2003 N 225 “On work books” Receipt and expense book for accounting of work book forms and inserts in it And book of movement of work books and inserts in them must be numbered, laced, certified by the signature of the head of the organization, and also sealed with a wax seal or sealed.

More about softcover Softcover- one of the most inexpensive and quickly produced bindings.

The binding cover is made of thick paper with a density of 160 g/m2; at your request, the cover can be laminated.

After the cover is ready and the block is printed, they are fastened with a paper clip, and if there are more than 60 pages in the block, then the bonding is carried out using a hot-melt adhesive machine.

Soft binding, due to its ease of execution and affordable price, is the most popular and one of the most affordable types of binding.

Cover color: white

Laminate the cover: ?
Lamination- This is the coating of printed products with film. Lamination will preserve the attractive appearance of printed products for a long time and reliably protect them from contamination and mechanical damage. We carry out single-sided and double-sided lamination up to A1 format using special devices - laminators. The main purpose of hot lamination is to protect the image from various external influences, which may include spilled coffee, all kinds of attempts to wrinkle, scrape, scratch the image, wet cleaning of premises, rain, snow. But experienced users also know about another valuable property of lamination: it can significantly improve image quality. When using glossy films, the image “appears” and the colors become more contrasting and richer. The "develop" effect gives inexpensive laminated paper the appearance of luxurious photo paper.

Quantity:

In stock

X
You ordered a thin magazine again.
Perhaps you need a magazine with more pages and other features.
Please use calculator

Article: 00-00005360
Year: 2018
Format: A4 (210x290 mm)
Binding: Paperback
Bonding method: Clip

Setting up a block of pages

Show ▼

Pages: 10 (sheets: 20) (Recommended 60 pages )

Select number of pages

Paper density: ?

48 gr./sq.m- thin, inexpensive paper with a slightly grayish or woody tint. Used for printing newspapers or similar products. It has low density and, accordingly, low wear resistance. The advantage of this paper is its low price.

65 gr./sq.m- bleached paper. Widely used in printing books, magazines, etc.

80 gr./sq.m- bleached paper. Used for printing books, magazines, etc. Used in household printers. The strength of this paper is significantly higher than the previous two types of paper. It is recommended to order magazines from this paper for production (dust, dirt), catering units (wet hands), etc.




Number, lace, seal: ?

You receive printed products numbered, laced and prepared for sealing in accordance with current regulatory documents:

The cost of lacing and fastening is 45 rubles.



9 out of 10 customers order lacing and sealing
And 7 out of 10 additionally order page numbering


?

Page numbering starts from the title page to the last page of the magazine. Page numbers are located in the lower corners of the magazine.


?

The magazine block is punched through two holes with a diameter of 6 mm, which are located at a distance of 80 mm from each other, from the spine side in the middle of the magazine.


?

The magazine is laced with a special lavsan thread threaded through the holes of the hole punch. Secure with a cardboard insert and a printable sticker.



Setting up the cover

Show ▼

Sewing-adhesive bonding ? Sewing binding

(makes binding more durable)

Sewing binding During the manufacturing process, printed sheets are used that are folded, assembled with notebooks and stitched together with threads, which gives the block high strength. Next, this block is inserted into the binding cover. (One binding cover is used, consisting of 2.5 mm cardboard covered with paper vinyl). Then the block is connected to the lid using a flyleaf - a sheet of paper. A captal is glued to the upper and lower parts of the spine of the block for visual beauty and completeness of the product.

Emboss on the cover: ?

The name of the magazine is completely transferred by embossing to the cover; gold foil is mainly used (but silver, blue, and red are also available). You can emboss: the name of the organization, logo, any combination of letters, numbers and drawings.

The cost of embossing work is 80 rubles.


If you have uploaded your company logo, we can emboss it along with the magazine name




Number, lace, seal: ? According to the Decree of the Government of the Russian Federation of April 16, 2003 N 225 “On work books” Receipt and expense book for accounting of work book forms and inserts in it And book of movement of work books and inserts in them must be numbered, laced, certified by the signature of the head of the organization, and also sealed with a wax seal or sealed.

More about softcover Softcover- one of the most inexpensive and quickly produced bindings.

The binding cover is made of thick paper with a density of 160 g/m2; at your request, the cover can be laminated.

After the cover is ready and the block is printed, they are fastened with a paper clip, and if there are more than 60 pages in the block, then the bonding is carried out using a hot-melt adhesive machine.

Soft binding, due to its ease of execution and affordable price, is the most popular and one of the most affordable types of binding.

Cover color: white

Laminate the cover: ?
Lamination- This is the coating of printed products with film. Lamination will preserve the attractive appearance of printed products for a long time and reliably protect them from contamination and mechanical damage. We carry out single-sided and double-sided lamination up to A1 format using special devices - laminators. The main purpose of hot lamination is to protect the image from various external influences, which may include spilled coffee, all kinds of attempts to wrinkle, scrape, scratch the image, wet cleaning of premises, rain, snow. But experienced users also know about another valuable property of lamination: it can significantly improve image quality. When using glossy films, the image “appears” and the colors become more contrasting and richer. The "develop" effect gives inexpensive laminated paper the appearance of luxurious photo paper.

8. Acceptance and delivery of shifts

Accepted: State Committee on Architecture and Construction of the Russian Federation

Accepted: TsNIIS Ministry of Transport of the USSR

REMOVABLE
BOILER ROOM MAGAZINE

Finished ________________ 20___

8. ACCEPTANCE AND DELIVERY OF THE SHIFT

8.2. Before starting a shift, the driver (fireman, operator) must clean the firebox, remove slag and ash, and hand over the boiler installation in complete cleanliness and order.

c) read the log with all the orders of the boiler house management regarding its maintenance (boiler load schedule, steam pressure or water temperature depending on the outside air temperature, etc.);

condition of the grate, threshold and other parts of the combustion device (for solid fuel);

according to the operating mode - draft, blast, position of all dampers, ease of their movement;

when the last boiler blowdown was performed and the time assigned for the next one;

readings of control and measuring instruments (thermometers, pressure gauges, gas analyzers, draft meters, etc.), if there are any deviations from the norm in their readings, find out the reasons.

b) steam pressure in the boiler using a pressure gauge, having first ensured that it is in good condition;

k) the condition and position of valves and taps on the fuel oil pipeline for boilers operating and in reserve or repair, paying attention to Special attention for the absence of fuel oil leaks;

l) good condition of automatic safety and automatic control systems;

m) serviceability of emergency lighting and signaling devices for urgently calling the administration;

o) the presence of good lighting of instrumentation and fittings (pressure gauges, thermometers, water indicating devices, purge and control valves, etc.).

Rules for maintaining a boiler room shift log

Started ___________________ 20___

STANDARD INSTRUCTIONS FOR SAFE WORK FOR BOILER PLANT PERSONNEL

8. ACCEPTANCE AND DELIVERY OF THE SHIFT

8.1. The driver (fireman, operator) taking over the shift must report to work 15-20 minutes before the start of the shift and find out how many boilers are in operation, what changes have occurred in the load of the boilers and in the situation with the supply of steam or hot water to consumers. Familiarize yourself with the condition of all boiler installation equipment.

a) obtain information from the driver (fireman) being replaced about the operation of the equipment during the previous shift, operational problems, operating mode of the boiler units, shift assignments and management comments;

f) check the availability of tools, lubricants, cleaning materials and spare parts necessary for servicing the boiler unit (water indicator glasses, fittings, etc.);

g) regarding the boiler and furnace, find out:

whether there are any bulges, bulges, cracks, leaks or other damage on visible parts of the boiler, especially those in contact with fire, as well as the serviceability of the furnace lining, lining and boiler fittings;

serviceability of gas burners, paying special attention to the pressure of gas and air in front of them and to the completeness of its combustion (with liquid fuel);

time of the last blow-off of the boiler, superheater, water economizer and air heater, as well as the time of subsequent blow-off;

condition of the water economizer and air heater;

d) good condition and degree of opening of the feed water shut-off valves, as well as the absence of boiler water leaks into check valves;

e) the serviceability of the drain and purge valves by probing the pipes behind the shut-off valves (during the purge);

f) the serviceability and position (open, closed, half-open) of all steam and water valves (valves, taps) and whether all handwheels and handles are in place;

g) good condition of all feeding devices (pumps, injectors) by briefly putting them into operation;

8.7. In boiler houses of medium power, where the work of servicing boiler units is distributed among the senior fireman, stokers, blowers, mechanics on duty and other workers, each of them takes a shift to the extent of the duties assigned to him by the production instructions approved by the management of the enterprise. The reception and delivery of shifts by the duty personnel are documented in the shift (watch) log by the persons responsible for the shift.

files.stroyinf.ru

New-electro

Professional website for energy workers

Instructions on the procedure for maintaining an operational journal and operational negotiations

The instructions determine the procedure for maintaining an operational journal and conducting operational negotiations.

1 AREA OF USE

This instruction is intended for operational personnel and determines the procedure for maintaining an operational journal and conducting operational negotiations.

2. TERMS AND DEFINITIONS

Operational log– the main document of duty personnel at all levels, in which records of an operational dispatch nature are drawn up to manage the operating mode of power equipment, changes in the state of power supply and electrical equipment, orders of senior technical personnel on admission to work and removal of equipment for repair, on the operation of protection and automation devices, about inspections carried out and violations identified in the operation of electrical equipment, about switchings performed to eliminate accidents and violations in the operation of electrical equipment, about work performed in the course of routine operation.

3 . GENERAL PROVISIONS

3.1 The operational journal refers to strict accounting documents and must be numbered, laced and sealed. On front side The cover of the magazine indicates the name - “Operational Journal” and the start and end dates of the journal. On the last page, a record is made of the number of sheets laced and the signature of the person responsible for electrical equipment or his deputy is signed.

3.2 The magazine must be constantly located at the workplace of operational (operational and repair) personnel. Completed logs are stored for 3 years from the date of the last entry.

3.3 The person who made the entry in the operational log bears responsibility for the correctness and reliability of the entries.

4. CONTENTS OF THE OPERATIONAL JOURNAL

Each page of the journal must contain three columns.

4.1 In the first column “Date, time” enter the date and time (day, month, year, hours and minutes) of the beginning of the shift, and at the end of it - the end of the shift. Next, (during the shift) the time (hours, minutes) of each recorded event (message, order, instruction, operational switching, etc.) is set, i.e. the beginning of operational actions is recorded.

4.2 In the second column “Content of messages...” the position and surname of the person with whom operational negotiations are being conducted, the content of messages, orders, instructions received or given by operational or operational maintenance personnel are recorded.

The duty personnel records the acceptance and delivery with a record indicating the status (in repair, in reserve) of the power supply circuit and electrical equipment, the number of grounding means and the location of their application; information about the availability of documentation, keys to the electrical installation premises, and the signature of the person who handed over the shift. The person accepting the shift signs the signature of the person who passed the shift indicating its acceptance, indicating the time.

4.3 In the third column “Visas, comments”, notes are made by those responsible for the electrical equipment about the correctness of the journal. The log should be reviewed periodically by the person responsible for the electrical facilities, but at least once a month. All violations in the operation of equipment must be noted in the log with a red pencil.

4.4.1 Records are kept in chronological order, only in blue, violet or black ink or paste and must be clear, clear, without blots or erasures. In case of an error, the incorrect entry is placed in brackets and crossed out with a thin line (so that it can be read), and the correct entry is made next to it. When a missing record is detected, it is executed in the free space and the time when the recorded event occurred is set. Before recording, please note " Missed entry”;

4.4.2 It is prohibited to make notes in the margins or between the lines. Missing blank lines are crossed out with a zigzag;

4.4.3 In the record about the application of portable grounding connections (PP), the inclusion of grounding knives (GN), the words “installation” are underlined with a red line. PZ No...” and “incl. ZN, ZLR or ZShR”;

4.4.4 In the record about the removal of the PP or disconnection of the PL, the blue line underlines the words “removed PP No...” and “disabled PL”; at the same time, the red line and the previous entry about the application of grounding or the inclusion of grounding knives are crossed out with a blue line.

4.4.5 It is prohibited to make notes that are not directly related to the operational maintenance of electrical installations.

4.4.6 When accepting a shift in daytime The operating personnel reports to the energy supply dispatcher about the acceptance of the shift and the condition of the electrical equipment.

5. ABBREVIATIONS USED WHEN MAINTAINING AN OPERATIONAL JOURNAL

When maintaining an operational log, operational personnel and the energy supply dispatcher must be guided by common abbreviations and names used in the electric power industry:

www.nov-electro.com

Manuals, Instructions, Forms

New files


sample shift log for gas boiler room operators

Documentation for the boiler room

In each boiler room, depending on the types of boilers, there should be be the following documentation:

1. Passport of the boiler (economizer) and pipelines.

2. Repair log for each boiler.

3. Manufacturer's instructions for installation and operation of boilers and economizers.

4. Repair log of auxiliary equipment and pipelines.

5 Shift log of the boiler room.

6. Journal on water treatment (water chemistry).

7 Log of inspection, maintenance and repair of automatic protection and alarm systems.

8. Magazine emergency training with boiler room staff.

9. Personnel knowledge test log

10. Journal (form) of thermal movement of elements of boilers and steam pipelines.

11. Pressure gauge control log.

12. Journal for issuing permits for work.

13. Circular and newsletters Gosgortekhnadzor

14. Instructions of the Gosgortekhnadzor authorities.

15. Schedule of preventive maintenance of boilers and auxiliary equipment

16. Alarm and automatic protection maintenance schedule,

17 Operating instructions for boiler operators

18. Production instructions for mechanics for servicing pipelines.

19 Instructions for maintenance and testing of safety and alarm devices

20. Instructions for maintaining the water chemistry regime

21. Operating instructions for pre-boiler water treatment plant with regime maps.

22. Instructions for preserving boilers

23. Instructions for repairing boiler heating surface pipes

24. Regime map of thermal technical tests of boilers

25. Technological diagram of boiler room pipelines
26. Instructions for persons responsible for the good condition and safe operation of steam and hot water boilers

Documentation for the boiler room - 4.7 out of 5 based on 3 votes

sample shift log of gas boiler room operators:

  • sample written appeal from citizens

    sample boiler repair log

    sample written analysis

    sample contract for the installation of heating radiators

    sample employment contract with gas station operator

    sample power of attorney for sending reports by tks

    Sample resume for a job in Kazakhstan as a teacher

    sample receipt for repair of household appliances

    creating a work book for the first time sample

    Other articles

    Shift log of boiler room operators

    Developed on the basis of clause 8 (Acceptance and handover of shifts) of the Standard Instructions for the Safe Conduct of Work for Boiler House Personnel (RD 10-319-99).

    In the boiler room, a shift log of boiler room operators should be kept to record the results of checking boilers and boiler equipment, water indicating devices, water limit indicators, pressure gauges, safety valves, feeding devices, automation equipment, as well as the duration of boiler purging. The person handing over and accepting the shift must sign in the logbook about the delivery and acceptance of the boilers and the shift.

    The orders of the head of the boiler room (section) on lighting or stopping the boilers (except for cases of emergency shutdown of the boilers) are also recorded in the shift log of the boiler room operators. Entries in the Shift Log of Boiler House Operators are checked daily by the person responsible for the safe operation of boilers, which he makes an entry in the log.

    Malfunctions detected during equipment operation should also be recorded in the boiler room operators’ shift log.

    2014-2016 © production company "Vector"
    everything for your safety

    Boiler room operator's shift log, sample filling - We'll help you find it

    Incorrect and correct KBK samples: how to quickly correct an error in a payment slip for taxes and contributions None of this While you were on vacation The most important events, materials and changes in the law Select from Subscribe to mailing lists News from the website of the magazine "Glavbukh" News of the forum of the magazine "Glavbukh" Events of the magazine "Glavbukh" News about projects of the magazine "Glavbukh" Promotions and special offers © Aktion Group Glavbukh LLC Use of site materials is possible only with written permission. Then gradually open the gas valve in front of the burner and gradually add air using the air damper, achieving normal gas combustion: the flame should be stable, non-smoking, transparent and not coming off the burner. This period can be anticipated during the schedule planning stage; - period of temporary incapacity for work. Putting boilers into operation is divided into: a putting boilers in hot reserve into operation; b putting the boilers into operation after installing them in a new place, i. Gradually and carefully open the fuel oil control valve and feed fuel oil into the furnace. In particular, employees need to be aware of upcoming changes at least two months in advance. If in a boiler room operating on gaseous fuel, all the boilers were not working, then upon entering it you should check with a gas analyzer or other reliable method for the presence of gas in the room. The standard working time for any employee - no matter what schedule he works on - is 40 hours a week. Shift schedules in continuous production provide for the working hours of each employee, regular days off, a permanent composition of teams, the order of transition from one shift to another, etc. Work on alkalizing, washing and cleaning the boiler from contaminants must be carried out in accordance with special instructions developed based on the requirements of the installation and operation instructions for the boiler of the manufacturer and taking into account the local operating conditions of the installed auxiliary equipment and pipelines. If it is impossible to eliminate malfunctions on your own, you must inform the person responsible for the good condition and safe operation of the boilers or the person replacing him, and in emergency cases, immediately suspend the operation of the boiler units. After turning off all burners, it is necessary to disconnect the boiler gas pipeline from the general gas pipeline in the boiler room, open the purge candle on the outlet, and also ventilate the firebox, gas ducts and air ducts.

    The main thing in the job responsibilities of a boiler room operator is to ensure uninterrupted operation equipment. Boiler room operator job description APPROVED CEO The surname Boiler room operator belongs to the category of workers. During the absence of the boiler room operator, his rights and responsibilities are transferred to another official, as announced in the order of the organization. A person who meets the following requirements is appointed to the position of boiler room operator: persons at least 18 years of age who have passed a medical examination for the ability to service this technological equipment and certification for the right to service steam boilers operating on gaseous fuel. The boiler room operator must know: - rules for the design and safe operation of steam and hot water boilers, operating instructions for steam boilers; — rules for the safe operation of gas equipment; — the effect on a person of dangerous and harmful factors that arise during work; — requirements for industrial sanitation, electrical safety, fire safety; — assignment of personal protective equipment. The boiler room operator is guided in its activities by: - ​​legislative acts of the Russian Federation; — Charter of the organization, Internal labor regulations, others regulations companies; — orders and instructions from management; - this job description. Job responsibilities of the boiler room operator The boiler room operator performs the following: job responsibilities: 2. Takes all measures to ensure uninterrupted steam production in required quantity and in the set parameters. Keeps a shift log and promptly notes in it all comments that arose during the work process. Monitor gas consumption daily and record the boiler room meter readings. Conducts preventive inspections of boilers, their auxiliary mechanisms, control and measuring instruments and participates in scheduled preventive maintenance of boiler units. Rights of the boiler room operator The boiler room operator has the right to: 3. Demand from management the timely provision of necessary materials, equipment, tools, special clothing, fire fighting equipment and personal protective equipment. Do not follow the instructions of the management if these instructions contradict safety regulations, which can lead to an accident or damage to the boiler and equipment, as well as pose a threat to the life, health and safety of people. Submit proposals for improvement of work related to the responsibilities provided for in these instructions for consideration by management. Responsibility of the boiler room operator The boiler room operator is responsible for: 4. For failure to comply with current instructions, orders and instructions for maintaining trade secrets and confidential information. For violation of internal labor regulations, labor discipline, safety and fire safety rules. Editorial office - RDV-Media LLC, 109004, Moscow, Maly Drovyanoy per. Editor-in-Chief - Andrey Eliseev. Technical support and creation of website software services - RDV-soft LLC, 109004, Moscow, Maly Drovyanoy per. Federal service for supervision in the field of communications, information technologies And mass communications Roskomnadzor. When republishing materials, an active link to Rabota. Search jobs and recruitment.

    Boiler room replacement log sample - Our choice

    The cost of a 20-sheet magazine is 50 rubles. Instructions for the conservation of boilers 23. Recommendations are given for organizing reliable and safe operation of boiler installations, including organization. Journal on water treatment and water chemistry. We always have all types of magazines listed below in stock. Production experience in the operation and adjustment of boilers of various modifications is summarized. The standard program does not have the ability to capture individual video frames and save them as graphic files. Hot melt adhesive; Choosing the right fastener depends on the number of sheets and paper thickness. Repair log for each boiler.

    Technology magazines

    We can offer several types of magazine binding: 1. Well, who downloaded operational journal boiler room - download samples for free - tell me how? After completion, the production control log must be kept by the person responsible for the gas facilities of the boiler room or site for one year. We recently launched a gas boiler house at our enterprise. Journal of thermal movement of boiler and steam pipeline elements. Due to the fact that printing is done on a risograph, we can provide you low prices, which will undoubtedly be a plus when printing this type of printing. Circular and information letters of Gosgortekhnadzor 14. Information about energy fuels and the organization of their combustion is provided and covered. Instructions for maintaining the water chemistry regime 21.

    ISBN: 978-5-94280-459-6 Short description The book sets out in detail the contents of an approximate list of local documents in the field of occupational safety and health that an enterprise must have in order to organize the safe operation and maintenance of pressure vessels, as well as comments on them. Hot melt adhesive; Choosing the right fastener depends on the number of sheets and paper thickness. Before starting to keep the journal, it is stitched together, the pages are numbered, stamped and signed. General noise and Jaime Miro hastily opened the sample.

    I regret it, boiler room operator's change log sample we can

    Repair log for each boiler. Boiler room operator's shift log sample If it works, it will be a shift-worthy victory. In each boiler room, depending on the types of boilers, there should be the following documentation: 1. The front and top parts of the boiler room, which you used in your business in a slow-motion sample, clearly depicting all the details, the operator’s log of the boiler room sample is replaceable. Instructions for repairing boiler heating surface pipes 24. Hot-melt adhesive; Choosing the right fastener depends on the number of sheets and paper thickness. After completion, the production control log must be kept by the person responsible for the gas facilities of the boiler room or site for one year. Passport of the economizer boiler and pipelines. The book describes the most common damage to elements of steam and hot water boilers, auxiliary equipment, pipelines and fittings.

    The book describes the most common damage to elements of steam and hot water boilers, auxiliary equipment, pipelines and fittings. Schedule of preventive maintenance of boilers and auxiliary equipment 16. Logs for a gas boiler room.

    Boiler room shift log free download

    STANDARD INSTRUCTIONS FOR SAFE WORK FOR BOILER PLANT PERSONNEL

    8. ACCEPTANCE AND DELIVERY OF THE SHIFT

    8.3. The driver (fireman, operator) coming on duty must:

    d) find out the availability of the necessary water supply in the feed tanks;

    e) find out the availability of solid fuel in bunkers and trolleys, liquid fuel in fuel tanks;

    condition of the combustion chamber, dust preparation device and mechanisms, presence of lubricant in mill bearings and other equipment (for pulverized fuel);

    8.4. The driver (fireman, operator), after inspecting the equipment and familiarizing himself with the working diagram of the communications of steam, water, gas and fuel oil, must check:

    a) the water level in the boiler by opening test taps and purging water indicating devices;

    c) the safety valves are in good working order by carefully lifting the load;

    h) the condition and position of valves, taps and gate valves on the gas pipeline for boilers that are operating and in reserve or under repair, paying special attention to the absence of gas leaks;

    i) the condition of the equipment of the gas control point (GRP) or gas control unit (GRU) - if available;

    j) condition of air supply fans gas-burners, fuel oil nozzles and ventilation systems, paying attention to the absence of knocks and noises during their operation and the absence of overheating of the bearings;

    8.5. The driver (fireman, operator) taking over the shift must write down in the shift (watch) log all the malfunctions he discovered when going on duty and sign in the log together with the driver (fireman) handing over the shift.

    In case of detection of defects and malfunctions that impede the further safe operation of the boiler unit, the person taking over the shift is obliged to immediately notify the management of the boiler house about this.

    8.6. It is prohibited to accept and hand over shifts during emergency response and during critical switching operations.

    Housing and communal services is one of the largest industries that solves a wide range of problems in various directions. This section of the City Blank store is dedicated to magazines for housing and communal services. The entire range of forms is presented here, allowing you to solve a variety of problems.

    For enterprises operating in the public utilities sector, the issue of accounting is very important. One of the forms of primary documentation intended for accounting, control, and reporting is housing and communal services logs.

    To bring it to a single standard and optimize documentation to meet the needs of the industry, many magazines for housing and communal services have unified formats. Deviation from the established form of the document during its production is not allowed.

    Therefore, our magazines for housing and communal services are manufactured in accordance with the requirements of regulatory acts, as well as in full compliance with technology and in excellent quality. Other magazines that do not have strict regulations may change their content in accordance with the wishes of customers.

    Housing and communal services journals intended for accounting and various types of reporting must have the details of the company to which they belong. Tell our manager all the necessary information and we will add more information during the manufacturing process.

    You can express your wishes using a special order comment field, which will be available when placing an order. Also, using the call back function, you can communicate all your wishes to the manager by phone.

    The price of the housing and communal services magazine displayed in the product card reflects the cost of the product with basic characteristics. If they change, the cost will vary. You can modify the product yourself at your own discretion. The final price of the product is calculated and displayed automatically.

    Sample shift log for gas boiler room operators

    Corporate seminar “System of professional standards: preparing for application”
    Register of accepted professional standards, the legislative framework. Preparing the organization to apply professional standards. Personnel technologies that depend on the introduction of professional standards. Requirements for personnel records management in the context of the implementation of professional standards. The procedure for aligning job titles in the company with professional standards and qualification reference books, adjustment job descriptions. Recruitment. Procedure for refusing to hire. Changing the wage system. Adjustment staffing table. Qualification confirmation procedure. Improvement of employee qualifications in accordance with professional standards. Organization of employee training in case of non-compliance with professional standards. The procedure for transferring an employee to another position or termination employment contract based on the assessment results.

    FORUM

    Sep 29, 2016 - 16:18

    Sep 26, 2016 - 14:48

    Sep 29, 2016 - 14:09

    About the site
    Discussions regarding the operation of the site. Here you can ask questions about how to use this or that service.
    Skate moderators. luna198. Evgeniy K.

    08 Sep, 2016 — 16:53

    Sample boiler room shift log

    Maintenance schedule for internal gas pipeline and boiler automation 40. Takes all measures to ensure uninterrupted steam production in important number and in the set parameters. Conducts preventive inspections of boilers, their spare parts, control and measuring devices and takes part in scheduled preventive maintenance of boiler units.

    ShRP maintenance schedule 43. Log book of inspections and tests of personal defense equipment in the gas industry 35.

    Hydraulic fracturing passport 38. Combined operational passport underground gas pipelines 37.

    Road accident registration log 27. Download in To the list of job descriptions APPROVED by General Director Name I. Joint provisions 1.1.

    ________________ “________”_____________ ____ gram. Production instructions for operating instrumentation 6. Individual instruction card in the gas industry 36.

    Logbook for recording gas hazardous cases in the absence of a work permit 31. Memo on labor protection for the boiler room operator PPR 11.

    Job responsibilities of the boiler room operator The boiler room operator performs the following duties 2.1. Annotation on fire safety measures and actions in case of fire 4. Submit proposals for improvement of work related to the direct responsibilities provided for in this annotation for management discussion.

    The job description of the boiler room operator directly states the right not to scrupulously carry out the decisions of the authorities, since this is contrary to the safety rules and can lead to tragedy. Production manual for gas boiler room operators 9.

    Replacement log for a gas boiler 21. Replacement log for a steam boiler 22. The main thing in the duties of a boiler room operator is to ensure uninterrupted operation of the equipment.

    Keeps a shift journal and promptly notes in it all comments made during the work. External gas pipeline maintenance schedule 41.

    Journal of registration of instructions in the gas industry 28. Production notes on the operation of gas pipelines 7.

    Operational journal of the GRP and GRU 24. For non-compliance with current instructions, decrees and resolutions on maintaining paid hidden and confidential information.

    Event Project production control 12. Require management to promptly provide sufficient materials, equipment, instruments, special clothing, fire fighting equipment and personal defense equipment. Do not scrupulously comply with management decisions, since these decisions contradict the rules of safety technology, which have every chance of leading to tragedy or defects in the boiler and equipment, and also pose a danger to the life, well-being and safety of the inhabitants of our planet.

    Rights of the boiler room operator The boiler room operator is authorized 3.1. A person is appointed to the position of boiler room operator who meets the subsequent requirements of a person no younger than 18 years of age, who has undergone a medical examination for the possibility of preventing this scientific and technical equipment and certification for the right to prevent steam boilers operating on gaseous gasoline. The boiler room operator is required to know the guidelines for the adaptation and non-hazardous operation of steam and hot water boilers, instructions for the operation of steam boilers; — guidelines for the non-hazardous operation of gas equipment; — the impact on the inhabitants of our planet of unsafe and harmful moments that arise during the work period; — requirements for industrial sanitation, electrical safety, fire protection; — assignment of personal security equipment.

    The boiler room operator belongs to the group of workers. Journal of control checks of pressure gauges 16. The boiler room operator is appointed to the position and dismissed from it by decree of the general director upon the presentation of the workshop boss / manager of the structural unit.

    Inspection schedule for boilers and steam pipelines 13. Report of the gas pipeline line inspector Maintenance schedules 39. Production notes on non-hazardous methods of gas-hazardous work 5. Log of registration of work permits for carrying out gas-hazardous work 29.

    Monitor gas consumption every day and record the boiler room meter readings. Logbook for recording external gas pipelines accepted for use 34. Schedule of maintenance work at the boiler room Logbooks 14. Logbook for bypassing gas pipelines 23.

  • Views