Adl shut-off valves. Pipe fittings adl

Analysis of sales of the domestic water heating equipment market shows that undisputed leader Here are the products of the Italian company Ariston. Consistently high quality, reliability, ergonomic design - this is what attracts consumers to the products of this company. Among the many models, the most popular are Ariston 100 l water heaters, as they can satisfy daily requirement in hot water for a family of 3-4 people. It consists of a housing and a tank covered with insulating material, as well as a heating element and control devices (thermostat, control unit).

The manufacturer, among others, produces units that have a volume of 100 liters. Mainly electrical devices storage type, which are used to heat water in apartments, private houses and other premises connected to the electrical network. They are presented in the following series:

1. Ariston ABS Velis (QH, INOX QH, POWER, INOX POWER, PREMIUM).

The abbreviation ABS means that all models are equipped with the Absolute Bodyguard System - a protective shutdown device. In case of power surges, water leaks or problems with the pressure valve, the system blocks the operation of the device, making it absolutely safe. The main difference between Velis 100 V and units of other series is that they are equipped with 2 internal independent tanks, in which a heating element is installed.

This allows you to get water heated to 45 °C within 53 minutes after switching on. Both tanks are internally treated with an AG+ layer (silver coating), which helps protect the body from corrosion. The wall-mounted storage electric water heater Ariston Velis can be mounted on the wall in any position: vertical or horizontal. The front panel of the boilers has a digital display with a programming function.

2. A review of the Ariston ABS PRO R 100 V electric water heater indicates that the unit is equipped with a tank made of cold-rolled steel. Its external surface is covered with a layer of fine enamel, which provides protection against leakage and corrosion. The Ariston ABS PRO-R 100 electric water heater is equipped with an on/off indicator, a reliable mechanical thermostat and a heating scale displayed on the outer panel of the device. In addition, it has a special magnesium anode that protects the heating element from premature wear.

In the production of the metal tank of the 100-liter storage water heater Ariston ABS PRO ECO 100 V, a special welding technology (microplazmatig) is used, thanks to which high strength and durability of the seams are achieved, and the boiler is able to withstand pressure drops of up to 15 atmospheres. ECO coating made from silver neutralizes harmful chemical elements. The unit is equipped with an electric thermometer, which allows you to monitor the operation of the boiler in real time, ensuring constant temperature control.

1. Ariston ABS Blu.

Devices in this series are represented by the R and ECO model lines. The description of the Ariston Blu R100V vertical water heater indicates that this modification is equipped with a simple mechanical thermostat. The storage container is coated on the outside with a protective layer of polyurethane, which promotes maximum heating. The inside walls of the tank are coated with a protective layer of Ag+. Another model is BLU ECO POWER 100V, equipped with an electronic thermostat and digital display. Designed for accelerated heating of water.

The series includes compact boilers TI TRONIC, TI TECH and TI SHAPE. Ariston TI TRONIC is a high-quality water heater equipped with mechanical device to regulate temperature. The inside of the container is treated with Titanium+ technology, which provides it with protection against rust. The Ariston TI TECH QB 100V compact water heater is equipped with a simple thermostat, but has greater power and quickly heats the water to the desired temperature.

3. Ariston Perla.

This is a type of heating device that combines 2 heating methods. For example, the technical characteristics of the Ariston PERLA 100 VRDT/5 combined water heater are such that, thanks to the heat exchanger built into the tank, it can function as an indirect heater during the heating season. Then a heating element with a power of 1.5 kW makes it possible to use it as an electric boiler; to do this, you just need to turn off the tap connecting the installation to the heating system.

Models in this series also belong to the combined type and are equipped with two types of heaters: a heat exchanger and a heating element. In addition to the main thermostat, the SG R 100 LTDTS has an additional one, which makes operation completely safe.

In addition to the above-mentioned electric heating devices, the Ariston company also produces units with a tank volume of 100 liters, powered by another energy source - gas. However the lineup Such installations are limited to SGA products. Gas installations have natural draft and an open combustion chamber, which makes it possible to obtain heated water regardless of the pressure in the gas and water supply system. In addition, they are equipped with a piezo ignition device with a built-in thermocouple, which controls the flame. A modification of the wall-mounted boiler SUPER SGA is used for domestic and industrial needs.

Technical characteristics of water heaters with a 100 liter tank

Series	Model	Indicators
		power, kWt	Voltage, V	Operating temperature, °C	Pressure, bar	Water heating time up to 45 °C, min	Dimensions, mm	Weight, kg
Velis	QH,INOX QH	1,5+1	230	80	8	first tank – 53, second – 139	1275x490x270	30
	POWER, INOX POWER	1,5+1		80		The first tank is 91, the second is 139
Pro	R	1,5		75		206	913x450x480	26
	ECO	1,5		80		232	1338x450x470	26
Blu	R	1,5		75		232	913x450x480	26
	ECO POWER	2,5		80		130	1338x450x470	29
T.I.	TI TRONIC	1,5		80		232	913x450x480	26
	TI TECH QB	2,0		75		170	963х493х499	34
PERLA	100VRTD/5	1,5		80		232	913x450x480	25
S.G.	SG R100L/RTDTS	1,8		80	6	175	904x450x470	35
S.G.A.	SUPER SGA	4,4	—	45	8	71	950x495x510	35

Advantages and disadvantages

TO positive qualities Ariston boilers can be classified as:

• Quickly warms up the required volume of water.
• Treatment of tanks using AG+ and Titanium+ technology.
• ABS system, which protects installations from breakdowns associated with power surges, leaks, and so on.
• Simple, reliable mechanical and electronic thermostats that allow for the most precise adjustment with an error of no more than 1 °C.
• Possibility of use at low pressure in the water supply system.
• The ECO function ensures water purification from harmful chemical elements.
• With all the technical innovations used in production, the price remains affordable for any category of consumers.
• Warranty period from 5 to 10 years.

Judging by the reviews, the water heater is not without its drawbacks:

• The load on the power grid increases by an average of 1-1.5 kW.
• If the lights are turned off, such equipment will not work.
• The kit does not include brackets for wall mounting, flexible hoses for water supply, or a condensate drain tube.

How to install an Ariston water heater

According to the instructions, the Ariston electric storage boiler should be installed in dry, warm, well-ventilated areas. This process lasts about 2 hours and consists of the following steps:

1. Using a hammer drill, holes are drilled in the wall for anchors on which the water heater is hung.

2. It is connected to a water pipe using flexible hoses. Typically, input cold water marked in blue. A pressure relief valve is installed on it. The red outlet is connected to the hot tap. Tow is wound around all joints.

3. Open the taps and check all connections for leaks.

4. Using the connector, the device is connected to the mains. The contact on the water heater terminal, marked with the letter L, indicates “phase”, the letter N - “zero”, yellow grounding is marked.

If problems arise during operation, it is better to entrust the repair of the Ariston boiler to a specialist by contacting an authorized service center.

Such offices are open in all major cities Russia. Self-repair can lead to damage to expensive components and exclusion from warranty service.

Price

Average prices in rubles in Moscow vary and depend on the series and model of the boiler. The cheapest installation, TI Shape 100 V, costs 4,800 - 5,660. Moreover, it is worth noting that the price of the Ariston TI Shape 15 UR water heater, equipped with a much smaller tank (only 15 liters), is not much less - 4,100 - 4,500.

• The ABS Blu R 100 V model will cost 5,900 – 7,000.
• You can buy Ariston ABS PRO ECO 100 V for 7,100 – 8,600, ABS Pro-R 100V is slightly cheaper – 5,800 – 8,380.
• The cost of a 100 liter Ariston Velis fast heating water heater is 12,700 – 14,910.
• Combined type installations Perla 100 VRTD/5 will cost an average of 9,440 to 10,400.
• The most expensive units are those operating on gas SGA- 17,100 – 1,9,700.

It is difficult to imagine a normal, comfortable life in an apartment or private house without hot water supply. However, even with centralized heat supply it is not always stable. Therefore, water heaters have long ceased to be considered high technology, much less a luxury.

Among the many companies tirelessly fighting for the market in Russia, the Italian Ariston has achieved particular success. Advantages of its products:

1. Breadth of assortment(more than 70 models);
2. Excellent quality components. The company uses special corrosion protection. Magnesium anodes are installed even in cheap models of water heaters. The kit is always supplied, and environmentally friendly material is used as insulation.
3. Easy to control the device. Budget options are equipped with mechanical temperature control, more expensive ones with digital units. But at the same time, each boiler has a built-in controller that optimizes the selected mode.
4. Enough low price makes a water heater of 80-100 liters accessible to almost anyone, even the most needy person.
5. Easy maintenance. The process of assembling and disassembling the heating unit has been significantly simplified.
6. Excellent heat resistance. When turned off, the boiler cools down no more than 12 degrees per day.
7. Good heating speed. 30 minutes after turning on the device, you can already use warm water.

This is just a small list of the advantages of Ariston campaign boilers. Below, using an 80-liter model as an example, we will analyze the design, installation, repair and operation of this device.

Water heater devices

Why exactly 80 liters? Very simply, according to statistics, this volume is considered the most popular among the population. This amount of water is enough for an average family of three.

How does this device work? Today, the boiler is required not only to heat water, but also to maintain the set temperature for as long as possible.

As a rule, an 80-liter unit is flat in shape, but can be round. Inside there is a stainless steel tank. In the middle there is a heating element (). Next to it is a magnesium anode that protects the device from scale.

Also inside there is a short tube for supplying cold water and a long one (almost to the top) for releasing hot water. This is to ensure that hot water does not flow until the tank is full. Thanks to this, the heating element will always be in the water.

On front side The boiler has a thermostat, and at the bottom there is a thermostat and water outlets. The space between the outer shell and the inner tank is filled with heat-insulating material. When purchased in a store, a valve and fastenings are included with the water heater.

On the front side of the boiler there is a thermostat, and on the bottom there is a thermostat and water outlets

Device selection

How to choose the most suitable device for your apartment? Let's say you have decided on the volume, deciding that 80 liters is enough for you. You need to decide what price you are willing to pay for this pleasure. Budget boilers are no worse than expensive ones. Maybe not as beautiful with less precise settings, but Ariston provides a guarantee for all its models.

Next we decide on the form. It all depends on where you are going to hang it. You can take round or flat. Perhaps, if there is absolutely no free space on the walls, the only option there will be a horizontal water heater.

Let's decide on the power. Ariston is economical and therefore rarely uses overly powerful heating elements on its products. Of course, if you want the device to heat water faster, it is better to buy a more powerful device, for example 2.5 kW.

If you want to save money, take a 1.5 or 1.2 kW device. It will heat up more slowly, but you will save on electricity. Naturally, it is necessary to do what we do with any product in the store - check its integrity with the package. Don’t listen to sellers’ excuses like “it’s a small dent, it’s no big deal,” you’ll have a long time to live with this device, ask for a replacement.

Budget boilers are no worse than expensive ones. Maybe not as beautiful with less precise settings, but Ariston gives a guarantee for all its models

Installation and connection of the boiler

Installing a water heater is not particularly difficult. If you wish, you can do this yourself, but it is better to entrust this operation to a professional. If you decide to do it yourself, let's immediately discuss the issue of electricity.

Important: no extension cords with adapters. Only a separate outlet. If you can do it yourself, do it. No, call an electrician you know and run a separate line from the distribution panel. The socket must be located in a safe and dry place.

Step by step:

1. We decide on a location, drill holes for fastenings and hang the heater. It is better to do all this with the help of a level to avoid unnecessary distortions.
2. Next, you need to cut the tees into the distribution pipes. If they are metal-plastic or polypropylene, then there will be no problems with this. What to do when the pipes are metal? There are two options: either use a grinder and a screwdriver (thread cutting machine), or connect to a mixer.
3. We drilled holes, hung the apparatus, and cut tees with taps into the pipes. It is necessary to install a valve on the cold water supply in order to be able to shut off the water to the boiler.
4. We screw the valve to the cold water outlet (it should be included in the kit). Don’t forget to wrap flax or fum tape around the thread. The valve has a dual function. On the one hand, it discharges water at high pressure, on the other hand, in the event of a shutdown, it does not allow water to leak out of the device and thus leave the heating element dry (which is unacceptable).
5. It is advisable to place a tee with a tap above the valve. This will make your life much easier if you decide to remove the unit one day. On valve and outlet hot water we wind up the Americans. Why them? The reason is the same. If you decide to remove the device for repair or replacement, you won’t have to worry about connections; American ones can be easily disassembled and assembled. We connect the connections from the pipes to the boiler.
6. The launch proceeds as follows. Without turning on the water heater, open the cold water supply. Don't forget to turn off the valve on the hot water pipe leading to the riser, otherwise you will supply heat to all your neighbors. We open hot water in the bathroom in order to release the air from the boiler. As soon as water flows confidently from the tap, you can turn on the water heater.

Now briefly about how to connect the device to the mixer. This is not difficult to do. You need to find a pair of tees that have external threads on both sides and internal threads on one. Carefully remove the mixer. We unscrew the eccentrics from their sockets. We screw in tees in their place.

The external threads in the middle should face up. We screw the valves onto them. We screw eccentrics into the internal thread and put on the mixer. We attach the water heater to the valves. Convenience this option is that there is no need to make a sidebar. This method is used for metal wiring.

Don't forget to turn off the valve on the hot water pipe leading to the riser, otherwise you will supply heat to all your neighbors

Rules for operating the device

There are several general rules, following which you can significantly increase the service life of your device and avoid many problems. Here are some of them:

1. Read the manual carefully by use!
2. Turning the device on and off too often can damage its electronic components. Here it is better to follow the “set it and forget it” principle.
3. Be sure to turn off the hot water supply into the apartment before turning on the device.
4. It is necessary to carry out preventive maintenance at least once a year(clean heating elements, anode, tank from scale).
5. Do not turn off the device while heating. This can significantly shorten its service life.
6. Do not turn on an empty boiler. There is a high probability that heating elements will burn out without water.
7. If you are planning to leave home for a long time, disconnect the water heater from the network!

Turning the device on and off too often can damage its electronics.

How to disassemble a boiler. Boiler cleaning

If your device begins to heat water slowly or stops heating altogether, the problem may be scale and it’s time to clean the heating element or replace it (if it’s burnt out). Fortunately, the design of these models easily allows you to get to the heating element and other insides of the tank.

Here's how it's done:

1. Turn off the device from the network (required);
2. Shut off the water supply;
3. Drain the water (for this we installed a tee with a valve above the valve);
4. We unscrew two screws and remove the protective box;
5. Use a wrench to unscrew the nut securing the flange;
6. Carefully remove the old heating element along with the anode;
7. We clean the tank and the heating element with the anode from scale (replace if necessary).
8. We collect in reverse order. If necessary, replace the gaskets.

As you can see, there is nothing complicated. We hang the device in place, fill it with water, turn it on, check it.

Price

The Ariston model range is very diverse. We also see a wide range in terms of the cost of devices. From economy class models to very comfortable ones. Let's look at several samples from the 80 liter line, but at different prices.

Let's start with the most modest:

Ariston SUPERLUX NTS 80V price 5,650 rubles. Tubular heating element, maximum temperature 75 degrees, power 1.5 kW number of heating elements - 1. Mechanical control, heating time 186 minutes. The inner coating is enamel. Maximum pressure up to 7 atmospheres.

Now let's look at a more expensive model:

Ariston ABS PRO ECO INOX PW 80V price 11,046 rubles. Temperature up to 80 degrees. Power 4 kW. Number of heating elements – 2. Electronic control (buttons). Internal covering – stainless steel. Protection against turning on without water and protection against overheating. Accelerated water heating.

As you can see, there is a difference. Let's look at an even more expensive model:

Ariston VELIS INOX 80 l price 22,990 rubles. The internal tank is made of stainless steel with special protection. Ultra-fast water heating. Protection against: electric shock, switching on without water, power surge, bacteria. Ultra-precise temperature control. Automatic error diagnosis. Improved magnesium anode. Electronic control. Polyurethane foam thermal insulation. Power 1.5 kW.

That's the difference. If any of the listed data is important to you, you can pay extra and buy yourself a more expensive device. If not, then a budget model will suit you just fine.

Every property owner wants to equip their home with an autonomous plumbing system that supplies hot water. Thus, you can use hot water all year round, regardless of the season or centralized installation schedule. The Ariston 50-liter water heater is in great demand because it has a wide range of advantages.

A water heating boiler is a specialized device that performs the function of heating water with further stable maintenance temperature regime During a long time. Why exactly the 50-liter model is interesting and what models the manufacturer offers are in our article.

Equipment classification

Units from this manufacturer are divided into several classifications based on the following parameters:

• Storage, instantaneous, indirect water heaters;
• Floor-mounted or wall-mounted devices;
• Equipment operating using natural gas or electricity.

Each device has a specific heating system, an installation responsible for control, fasteners corresponding to the classification and other additional options.

Purpose of the tank

Household units operating on electricity are often used during periods when the water supply from the centralized pipeline is stopped. For short-term use, small wall-mounted storage water heaters are purchased. If installed correctly, the device will provide the house with a supply of warm water, which can be used to fulfill all household needs: washing dishes, wet cleaning, washing things or taking a shower.

In private cottages in combination with gas boilers use gas or electric type heaters with large storage tank dimensions. IN in this case The Ariston boiler is used all year round.

Rating of the best Ariston water heaters for 50 liters

The Italian company produces many modifications of water heaters, differing in type of heating, volume, shape and other important technical characteristics. We suggest considering the most popular models.

Ariston (50 liters) VELIS INOX

The wall-mounted device can be installed in a horizontal or vertical position. It is distinguished by its relatively low cost and average volumes. The flat shape of the unit allows you to mount equipment not only on an open area of ​​the wall, but also in a niche.

The Ariston water heater is equipped with copper heating elements and a power of up to 2500 W. In addition, the device has a protection system located on the electrical cord and a fuse that prevents unexpected start-up of devices with an empty tank.

Short description:

Ariston ABS VLS INOX QH

The external parameters of the model have significant similarities with the previous modification. The unit is equipped with automatic equipment that provides rapid heating and thorough filtration of the liquid. In addition, the device regularly monitors the temperature of the coolant itself, preventing the electric water heater from overheating.

Ariston ABS VELIS PW

The inside of the equipment is covered with a protective layer, developed in accordance with innovative technological scheme AG+. The equipment is equipped with an antibacterial protection system and two heating elements.

When assembling the device, I used special technology welding, providing a strong and monolithic connection that eliminates the possibility of leakage.

Ariston ABS PRO R SLIM

The cylindrical shape of the equipment allows you to install the unit in any convenient corner of the room. Electric storage elements produce rapid heating of the liquid. The budget version is divided into classifications by displacement - 30, 50, 65 and 80. You can buy the unit at average cost- from 8,000 to 14,000 rubles.

First start

In order for the device to properly perform its intended functions, you need to follow the selection recommendations, install the equipment and turn it on for the first time, taking into account all the rules. Most Ariston water heaters are characterized by the following step by step instructions launch:

1. First of all, the cold water supply valve opens. It is very important not to confuse the element with the safety lever.
2. At the same moment, open all the mixers that receive a hot flow of liquid. The taps will produce loud sounds and the pressure will be intermittent.
3. Wait until the tank is completely filled and a steady stream of water comes out of the faucet.
4. Turn on the power, set the temperature to medium.

It will be possible to increase the degree of heating after the first start-up of the equipment.

In the storage water heater Ariston 50, 60 or 100, it is very important to fix the lever, which is responsible for supplying hot pressure, in the required position. If you ignore the situation, the heated liquid may flow into the common riser of the house.

VIDEO: ARISTON water heaters. Installation and installation

Repair work

Like any other technology, storage water heater electric 50 liters flat or rounded, has vulnerable elements. In this case it is:

• Thermoregulatory system;
• Heat transfer sensors;
• Switches;
• Heating elements.

Valves or insulating gaskets are often the first to fail. The integrity of the boiler is compromised in rare cases. The reason for this may be corrosion formations and improper operation. In case of serious damage, you must contact the service department.

Repair of Ariston 50 at home involves only preventive processes associated with timely cleaning of heating elements. Experts recommend cleaning parts at least twice a year.

First signs of breakdown

1. The device makes a hissing sound during operation.
2. The average amount of time allocated for heating water has increased significantly.

Before starting repair work, preliminary preparation of the device should be carried out. To begin with, the power supply is turned off, the liquid is drained from the system, and the water supply is shut off.

The best option for descaling is considered to be citric acid, previously diluted in water. The liquid is poured into the tank for a day, after which the mixture is poured out and the container is washed from residues of plaque. clean water.

A magnesium anode, which has a potential limit lower than that of the tank coating and the heating element itself, helps solve the scale problem. If we talk in simple language, the process of rust formation begins precisely from the anode, and only then “spreads” to the heating element and the inner surface of the tank. If you regularly replace the anode (on average, once every 8-12 months), there will be no need to clean the heating element, and the equipment itself will work properly.

All modern water heating equipment is already equipped with removable magnesium anodes. The user is only required to promptly replace them with original consumables.

If you need to replace parts yourself, you should purchase only original elements. You can order spare parts from a specialized store or from direct suppliers.

Disadvantages of Ariston 50 l, 60, 100

• Requires regular preventive maintenance to clean the heating element from scale. If you clean the heating element less often, this will lead to rapid breakdown of the device.
• Uneconomical energy consumption.
• Expensive repairs and spare parts.

VIDEO: Ariston water heater repair

Comfortable life modern man Can't imagine without hot water. And utility workers are not very worried about its supply, especially in summer time. Therefore, everyone strives to independently take care of the well-being in their home. Nowadays, many people have started using water heaters. They are economical and practical. Ariston brand water heaters are considered the most popular today.

Peculiarities

The main feature of water heaters is the tank built inside, in which the water is quite for a long time holds given by the program temperature. This type of heater is suitable for people who often have problems with hot water. The most common is a water heater with a volume of eighty liters. It runs on one heating element and has a power of 1.5 kW. Accordingly, water up to maximum temperature at seventy-five degrees he can heat it up in three hours. This heater will be enough for a family of three people. The Ariston model, which has a capacity of 120 liters, has a power of 1.8 kW. As you can understand, the entire line is very economical, but at the same time not very fast.

But the regulator handle, located at the very bottom of the tank, is also not very conveniently placed. And even if the design has only five heating modes, you need to constantly look down in order to control the process of heating and cooling the water.

Of course, externally such a water heater only benefits from this, but ease of use is much more important. By the way, it is worth noting that turning the boiler itself on and off is also done using a rotary knob. This approach to design leads to the fact that only the light indicator and thermometer are visible to everyone. But, despite minor shortcomings, all Ariston equipment has many advantages. Water heaters are no exception to the rule.

• Stylish design will help decorate any interior.
• Each model is created using new technologies.
• Water heaters from this company have a long service life. This is achieved due to the fact that internal sides storage tank covered with a layer modern material, protecting it from the appearance of rye and plaque.

• Supplemented with dividers that prevent mixing of cold and heated water.
• Thanks to built-in temperature control sensors, the Ariston water heater has protection against overheating. A guarantee of safe use is a protective device that can operate in case of any voltage surges. Even if there is no water in the system itself, you don’t have to worry about it turning on by itself, because it has special protection.
• Heaters from this company help save gas and electricity consumption. This is facilitated by thermal insulation, which keeps the water hot for a long time.
• Many of the models are equipped with protection against the appearance of any bacteria. Thus, the water is already purified.

But when creating water heaters, it is impossible to do without disadvantages. There are few of them, and the main problem is that some structural parts fail from time to time. Very often the magnesium anode breaks, and then the water heater needs to be sent in for repairs. And the safety valve may also fail. All this is quite expensive.

Kinds

Ariston products can be divided into the following types:

• floor boiler;
• condensing boiler;
• a boiler with indirect heating;
• instantaneous water heater running on gas;
• storage water heater running on gas;
• electric heater with a storage function.
• heater having a heat pump.

Each of the devices is equipped with heating elements, various accessories, and control devices. Each water heater model has technical characteristics.

ABS VIS EVO PW D

This water heater is different electrically heating It has a tubular heater element, pressure tank type, electronic control, vertical and horizontal installation, and wall mounting method.

Ariston Regent 80

ABS PRO ECO INOX PW 80 V

If you decipher the abbreviation, ABS means that this is a device that turns off the storage water heater in cases where there are voltage drops. PRO means that the water heater has a cylindrical body designed for vertical installation.

ECO is a marking that notifies that the inner walls of the tank have antibacterial protection, as well as the function of purifying water from various chemical impurities.

INOX means that for interior decoration The flasks are made of stainless steel, which will provide a guarantee for a period of up to seven years. PW means that the water heater has an economical electric unit of one and a half kilowatts, and is also supplemented by another heating element of one kilowatt. This, of course, puts a greater load on the electrical network, but at the same time, 80 liters of water heats up much faster.

Water heater Ariston VELIS INOX

The design of this model consists of stainless elements. A protection system is installed on the power cord. But this model also has a fuse that prevents the heater from starting when the container is empty. This is already quite reliable protection against common breakdowns. The shape of the water heater is flat. The heating element is made of copper itself High Quality. The power of this model reaches 2.5 kilowatts, so the wiring must match.

Water heater Ariston ABC VELIS PW

This model has a disconnecting storage device, which allows you to leave the water heater unattended. And there is also additional function, providing antibacterial protection. The outside of the tank is protected by a layer of stainless steel.

Ariston PRO ECO INOX PW V SLIM

This water heater has a power of up to one and a half kilowatts. The body is covered with stainless steel. The diameter of this model is only 35.3 centimeters, and the inside of the tank is covered with an antibacterial protective layer. This water heater will not take up much space and will save energy.

Ariston ABS PRO ECO INOX PW

This model has a rather narrow cylindrical shape, so the water heater can easily be installed anywhere. It is controlled electronically. On the one hand, this is very good, but on the other hand, if the system fails, you will have to reconfigure everything in a new way.

All its parts, both internal and external, are coated with stainless steel. Thanks to many positive qualities, it lasts a long time, with a warranty period of up to seven years.

Ariston ABS PRO R INOX

The water heater consists of a mechanical thermostat and also has a magnesium anode that protects it from various bacteria. The heating control is located externally, not internally. The good news is that this is the most economical model.

Ariston ABS PRO ECO PW SLIM

This model has a very narrow shape of the water heater itself. This simple and laconic design is complemented by all the necessary protective systems. It is also economical in terms of energy consumption.

Ariston ABS PRO ECO PW

This type of heater is perfect for both the kitchen and bathroom. It has all the protection systems; its design includes an additional heating element, which allows you to quickly handle water heating.

Ariston ABS PRO R SLIM

The rather convenient cylindrical shape allows you to install the water heater in any corner of the room. He is the most budget option and has a diameter of up to 350 millimeters. It heats up quickly, has all types of protection, and includes a safety valve.

Of all the proposed models from famous brand you can safely buy almost any one. All of them are pleasing with their quality and last a very long time.

Connection diagram

Any water heater that seems simple at first glance has a simple and internal organization. Its dimensions can be either cylindrical or flat. Any water heater consists of:

• boiler, that is, the internal tank;
• housings that frame the boiler;
• A heating element that heats the water that has entered the tank, there may even be two of them, which contributes to the rapid heating of the water;
• a layer of thermal insulation located between the body and the boiler, allowing the water to remain warm for a long time;
• pipe with divider;
• magnesium anode, which prevents the deposition of mineral salts on the walls inside the tank;
• voltage indicator;
• thermostat;
• thermometer.

Terms of use

To produce correct installation water heater, you must strictly follow the instructions. Reading it will help not only to study all its intricacies, but also to prolong its working condition.

• Before starting work, you should first select the location where the water heater will be installed. It should be located close to the bathtub or shower so that heat loss is not large.
• Next, you will need to make sure that the tank is filled with water when turning it on and off. The first switch-on must occur with a full tank.
• When the heater is already connected to the network, temperature readings should be displayed on its control panel. The instructions say that if the numbers are flashing, this means that the water heater is still off. To turn it on, you need to press the on/off button, which is located in the upper left corner.
• There is a button on the control panel that sets the power. It regulates the voltage from 1500 to 2500 watts.

• The temperature can be adjusted using a button with plus and minus written on it.
• After installing the program, the water heater remembers it and operates in the already set mode. If the boiler was turned off, the settings are automatically reset.
• If any batteries are damaged, they must be replaced. You need to buy them from the same manufacturer as the water heater.
• If you plan not to use the heater for a long period of time, especially during winter period, it needs to be prepared for “stagnation”. To do this, you need to drain the water, leaving it empty.
• From time to time it is necessary to clean the inside of the water heater from dirt. To do this correctly, you need to have certain skills. Therefore, it is worth contacting specialists.

• The connection work should also be entrusted to specialists. First you need to carefully inspect the safety valve. It should not have any flaws. If they are present, it is necessary to replace the part that is damaged.
• It is also worth checking if the grounding is working.
• At the end of the instructions they talk about a very good function that protects the water heater from bacteria. Since a hot environment is an excellent place for their reproduction. When turned on, the heater will increase the temperature to more than 65 degrees, which will not allow bacteria to exist. This function needs to be enabled once a month, this will be enough.

Possible faults

When buying an Ariston water heater, you need to know which parts are the most vulnerable. The first is a thermostat, sensor devices, heating elements, and switches. But insulating gaskets and valves are also very often repaired.

If you handle the water heater carelessly, the integrity of the tank may be compromised. And it can only be repaired by a service center. To determine problems with a water heater, you need to understand whether there are changes in its operation. This may be a strong hiss during operation. And also often the period of water heating increases significantly. A sign of a breakdown may also be the fact that the device turns on and off more frequently or the lights flash frequently.

To prevent this from happening, you need to clean the heating element from plaque every six months as a preventive measure, otherwise it will turn into a pebble.

In order not to contact the service center in the event of a minor breakdown, you can do the repair yourself. This is not so difficult to do. First you need to turn off the power to both the device and the entire room. Then you need to drain the water. This is done using a hose that has a diameter slightly smaller than the hole designed to discharge the liquid. The flush hose should be placed directly into the toilet. Next, the cold water supply is shut off. Then you need to disconnect the hose from the cold water valve.

This hose needs to be connected to the tap and also lowered into the toilet. Next, disassemble the water heater and remove the heating element, the fastening of which is located on a nut with a plate or washer. Having pulled out the heating element, you need to very carefully examine those places where there is scale. Where it is available, it is necessary to clean it, but very carefully so as not to damage the tank. After the scale has been removed, the tank must be rinsed with clean water. If the heating element is in working condition, it can be cleaned in the same way. After this, in reverse order, all hoses and spare parts of the water heater must be installed in place.

The most budgetary funds To clean scale, citric acid is considered to be diluted in water. It must be poured into the tank and left there for a day. Parts must be replaced only with original spare parts. This guarantees stable work water heater.

To decide on the choice of an Ariston water heater, you need to know what the “ideal” boiler should be like, and look for exactly these functions and characteristics in the descriptions.

• The water heater must have a magnesium anode, which will protect it from scale and prevent corrosion.
• Vertical equipment costs much less than the horizontal version, which is important for those who prioritize savings.
• Those water heaters that are made of stainless steel or titanium will last the longest. However, their price is higher.
• It is necessary to have a bypass valve, which is necessary to relieve excess pressure that arises as a result of the difference in the thermal expansion coefficients of metal and water.

An Ariston water heater with a capacity of 80 liters will allow you to comfortably equip a country house or apartment. It is easy to use and receives mostly good reviews from customers. In addition, you can connect it yourself if you carefully read the instructions. But when installing the heater with your own hands, you need to remember that from correct installation The further operation of the device largely depends. Therefore, it is better not to save on installation and invite specialists. This will help extend the life of the heater and also save the owner’s nerves.