A list of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited. Legislative framework of the Russian Federation
On approval of the Rules for gas supply in the Russian Federation
In order to increase the reliability of gas supply in the Russian Federation, in accordance with Decree of the President of the Russian Federation of April 28, 1997 No. 426 “On the Basic Provisions of Structural Reform in the Spheres of Natural Monopolies” (Collected Legislation of the Russian Federation, 1997, No. 18, Art. 2132) The Government of the Russian Federation decides:
1. Approve the attached Rules for gas supply in the Russian Federation.
2. Recognize as invalid the Decree of the Government of the Russian Federation of December 30, 1994 No. 1445 “On approval of the Rules for the supply of gas to consumers of the Russian Federation” (Collected Legislation of the Russian Federation, 1995, No. 2, Art. 152).
Chairman of the Government
Russian Federation V. Chernomyrdin
Rules
gas supplies in the Russian Federation
(as amended on December 7, 2005, May 10, 2010)
I. General provisions
1. These Rules define the relationship between gas suppliers and buyers, including gas transportation organizations and gas distribution organizations, and are binding on all legal entities involved in gas supply relations through pipeline networks.
2. The supplier, gas transportation and gas distribution organizations and gas buyer are obliged to strictly comply with technical operation and safety rules in order to ensure reliable gas supply and rational use of gas.
II. Terms and Definitions
3. The following terms and definitions are used in these Rules:
"gas"- natural, petroleum (associated) and stripped dry gases produced and collected by gas and oil producing organizations and produced by gas and oil refineries;
"gas consumption armor"- the minimum volume of gas consumption necessary for accident-free, subject to the maximum use of reserve fuels, operation of the technological equipment of buyers, gas supplies to which, in accordance with the laws and other regulatory legal acts of the Russian Federation, cannot be stopped or reduced below a certain limit;
"gas distribution organizations"- specialized republican, regional, regional, city, interdistrict, rural organizations engaged in the development and operation of gas supply systems for territories, providing customers with gas, as well as providing gas transportation services through their networks;
"gas transport organization"- an organization providing gas transportation, whose main gas pipelines and gas pipeline branches are owned or on other legal grounds;
"gas transport system"- a gas pipeline system connecting a gas producer and a gas consumer, including main gas pipelines, gas branch pipelines, gas distribution networks owned by a gas transportation, gas distribution organization or buyer or on other legal grounds;
"gas failure"- selection (receipt) of gas by the buyer in a volume of less than daily norm gas supply in the event that the gas pressure provided by the supplier at the point of transmission gave the buyer the opportunity to select (receive) gas in the volume established by the contract;
"excessive gas consumption"- selection by the buyer of gas in a volume exceeding the daily supply rate;
"billing period"- the period agreed upon by the parties to the contract, during which the volume of supplied gas must be determined, mutual settlements must be made between the supplier, gas transportation, gas distribution organizations and the buyer for the supplied gas. Billing period, agreed upon by the parties, is indicated in the contract;
"average daily gas supply"- volume of gas supply, determined by dividing the monthly volume of supply by the number of days of the corresponding month;
"daily gas supply rate"- the average daily gas supply rate or the rate established by the dispatch schedule or agreement of the parties;
"gas transportation"- movement and transmission of gas through the gas transportation system.
III. Procedure for concluding contracts
4. To use gas as fuel, the buyer must have a permit, which is issued in the manner established by the Government of the Russian Federation. Technical conditions for connection to the gas transportation system are issued by the gas transportation or gas distribution organization, respectively, in the presence of the above-mentioned permit.
These documents are the basis for designing gas supply for newly built, expanded, reconstructed and existing organizations and installations.
Costs associated with connecting the facilities of the gas supplier and buyer to the gas transmission system are incurred at their expense.
Contractual volumes of gas supply must not exceed the volumes specified in the gas use permit.
The permit for the use of gas becomes invalid if the buyer does not prepare to receive the gas within 5 years after the period specified in it.
By Decree of the Government of the Russian Federation of December 7, 2005, paragraph 5 of these Rules was amended
5. Gas is supplied on the basis of an agreement between the supplier and the buyer, concluded in accordance with the requirements of the Civil Code of the Russian Federation, federal laws, these Rules and other regulatory legal acts.
The gas supply agreement must comply with the requirements of paragraph 3 of Chapter 30 of the Civil Code of the Russian Federation.
The gas balance for the Russian Federation is developed and approved by the Ministry of Fuel and Energy of the Russian Federation in agreement with the Ministry of Economy of the Russian Federation based on gas resources and the forecast of the need of Russian consumers for fuel and energy resources. The gas balance for Russia is of a recommendatory nature for gas suppliers and buyers.
If individual buyers establish a minimum volume of gas consumption in accordance with the procedure established by the legislation of the Russian Federation, the contract, at the request of such buyer, must determine the volume of gas supply not less than this minimum level.
Supply of gas to persons providing services for the formation of a promising technological reserve of production capacities electrical energy in accordance with Decree of the Government of the Russian Federation dated December 7, 2005 No. 738, is carried out on the basis of an agreement with a gas supplier concluded for a period not less than the validity period of the agreement on the provision of services for the formation of a promising technological reserve of electrical energy production capacity, unless otherwise established agreement of the parties.
6. Buyers of gas for state needs, for municipal needs and the population, as well as buyers who have previously entered into gas supply agreements, have a priority right to conclude gas supply agreements - to prolong these agreements.
7. The buyer or supplier of gas has the right to transport it in accordance with the provisions on ensuring access of independent organizations to the gas transmission system of the Russian Federation joint stock company Gazprom and to gas distribution networks approved by the Government of the Russian Federation.
8. The procedure and conditions for transporting gas through the gas transportation system are established by the gas transportation or gas distribution organization and are formalized by an agreement in accordance with these Rules.
9. A proposal to conclude a gas supply agreement is sent, as a rule, by the supplier to the buyer who has previously submitted an application for the purchase of gas.
10. A proposal to conclude a gas transportation agreement is sent by a gas transportation or gas distribution organization to the supplier (buyer) simultaneously with a permit to access the gas transportation system, issued in accordance with the procedure established by the Government of the Russian Federation.
11. Consent to conclude a gas supply agreement or a gas transportation agreement (signed draft agreement) must be sent by the party that received the proposal to conclude an agreement (offer) no later than 30 days from the date of its receipt, unless another period is specified in the offer.
If you disagree with the terms of the contract, the party who received the offer is obliged to send the other party a protocol of disagreements; in case of failure to receive a protocol of disagreements signed by the supplier within 30 days from the date of sending the protocol of disagreements, contact an arbitration or arbitration court and upon expiration of the contract concluded for the previous period, stop gas sampling.
The selection (continuation of selection) of gas by the buyer after the expiration of the specified 30-day period and (or) the validity period of the agreement concluded for the previous period is considered the consent of the party that received the offer to enter into a gas supply (transportation) agreement on the terms of the supplier (gas transportation or gas distribution organization ).
If the buyer appeals to the arbitration court, the validity of the gas supply agreement concluded for the previous period is extended until the court decision comes into force.
IV. Conditions, terms and procedure for execution of contracts
12. The supplier is obliged to supply and the buyer to select gas in the quantity specified in the gas supply agreement.
By Decree of the Government of the Russian Federation of May 10, 2010 No. 311, these Rules were supplemented with clause 12.1
12.1. The gas supply agreement determines the monthly, quarterly and annual gas supply volumes and (or) the procedure for their approval, as well as the procedure for changing the gas supply volumes specified in the agreement.
No. 311, paragraph 13 of these Rules has been amended
13. The supplier is obliged to supply and the buyer to receive (take away) gas evenly throughout the month within the limits of the average daily gas supply established by the contract, and, if necessary, according to the dispatch schedule agreed between the parties (including the owners of the gas transportation system).
Uneven supply of gas by day over the course of a month is allowed in cases stipulated by the contract.
The gas supply contract, which provides for uneven gas supplies every day during the month, must define the minimum and maximum daily volumes of gas supply. At the same time, the minimum daily gas supply volume should not be more than 20 percent lower, and the maximum daily gas supply volume should not be more than 10 percent higher than the average daily gas supply rate.
By Decree of the Government of the Russian Federation of May 10, 2010 No. 311, paragraph 14 of these Rules is stated in a new edition
By Decree of the Government of the Russian Federation of December 7, 2005, paragraph 14 of these Rules is stated in a new edition
14. Uneven supply of gas by month is permitted in the following cases:
if this is provided for by the dispatch schedule agreed upon by the parties (including the owners of the gas transportation system);
if gas is supplied for municipal needs, for boiler houses and thermal power plants in volumes that meet the heat energy needs of municipal organizations and the population;
if gas is supplied to generating facilities, with the use of which the electric power industry provides services for the formation of a promising technological reserve of electrical energy production capacity in accordance with Decree of the Government of the Russian Federation of December 7, 2005 No. 738 and in respect of which in accordance with the legislation of the Russian Federation the volume of electrical energy required for production with an uneven loading schedule during the day has been determined.
15. If the buyer overconsumption of gas, the supplier has the right to forcibly limit its supply to the established daily gas supply rate after 24 hours from the moment of warning the buyer and the executive authorities of the constituent entities of the Russian Federation.
16. Non-sampling of gas does not give the buyer the right to subsequently demand an increase in gas supplies beyond the daily norm.
17. If there is excessive consumption of gas without prior agreement with the supplier, gas transportation or gas distribution organization, the buyer pays additionally for the volume of gas selected by him in excess of that established by the contract and the cost of its transportation for each day using the coefficient:
This rule does not apply to gas volumes consumed by the population and household consumers.
18. The gas pressure provided for in the gas supply and transportation contracts is maintained subject to sampling by the buyer within the daily gas supply rate.
19. Executive authorities of the constituent entities of the Russian Federation approve the schedules:
transfer of consumers to reserve types of fuel during cold weather and the procedure for putting these schedules into effect in order to ensure the execution of the state contract for the supply of gas for state needs, export contracts under international obligations, contracts for the supply of gas for municipal needs and the population;
restrictions on the supply of gas to customers and the order in which they are disconnected in the event of a violation of the technological operating mode of the gas transmission system in the event of an accident.
Instructions on the implementation of the mentioned schedules and the corresponding change in the daily volume of gas transferred to buyers are given by the Central Production and Dispatch Directorate of the Russian Joint Stock Company Gazprom.
Such instructions from the Central Production and Dispatch Directorate of the Russian Joint Stock Company Gazprom on the mode of gas transportation, supply and selection are mandatory for suppliers, gas transportation and gas distribution organizations and gas buyers.
20. If the supplier does not have the opportunity to directly supply gas to the buyer, the supply agreement determines the party concluding a gas transportation agreement with the gas transportation (gas transportation) and (or) gas distribution organizations.
V. Gas metering procedure
21. Supply and selection of gas without taking into account its volume is not allowed.
22. The volume of gas transferred to the buyer is recorded using the control and measuring instruments of the party transmitting the gas, and is documented in a document signed by the parties in the form and within the time limits specified in the gas supply agreement.
A gas transportation and distribution organization may be assigned by a gas transportation agreement the duties and powers to accept, transfer and ensure accounting for the supplied gas on behalf of the supplier (buyer). The supplier (buyer) who has entered into a gas transportation agreement notifies the counterparty about this.
23. In case of malfunction or absence of control and measuring instruments at the transmitting party, the volume of transferred gas is taken into account according to the control and measuring instruments of the receiving party, and in their absence or malfunction - according to the volume of gas consumption corresponding to the design capacity of unsealed gas consuming installations and the time during which gas was supplied during the period of equipment malfunction, or by another method provided for in the contract.
24. Installation, operation and verification of instrumentation are carried out in the manner established in accordance with the Law of the Russian Federation “On Ensuring the Uniformity of Measurements” and the current regulatory legal acts of the Russian Federation.
25. Responsibility for technical condition and verification of gas metering instruments is carried out by the organizations to which the devices belong.
26. Each party to the contract is obliged to provide the representative of the other party with the opportunity to check at any time the operability of control instruments, the availability of valid certificates of their verification, as well as documents on the accounting and use of gas by the buyer.
27. The unit of measurement of gas volume is established in accordance with the current regulatory and technical documentation.
28. The party keeping gas records, on a monthly basis, before the fifth day of the month following the billing period, draws up a report on the volume of gas transferred, which reflects the daily volumes of gas reception and transmission.
If one of the parties disagrees with the determination of the volume of transferred gas, it signs an act, expressing a dissenting opinion.
If there are disagreements, the parties have the right to go to court.
Before the court makes a decision, the volume of gas transferred is established in accordance with the readings of the control and measuring instruments of the party transmitting the gas.
VI. Payments for gas and its transportation
29. Gas prices and tariffs for its transportation are indicated in the relevant contracts in accordance with the legislation of the Russian Federation and regulatory legal acts of federal executive authorities.
30. Gas supply and selection are carried out exclusively on a reimbursable basis in accordance with the concluded agreement.
The settlement procedure and payment terms are determined by gas supply contracts in accordance with these Rules.
Agreements under which gas distribution organizations are suppliers must contain the following mandatory conditions for payments for gas:
crediting funds received by gas distribution organizations for supplied gas to specially opened transit accounts of these organizations;
transfer of funds credited to special transit accounts of gas distribution organizations, minus the amounts of surcharges of gas distribution organizations, to the settlement accounts of their suppliers no later than the day following the day of receipt of funds to these transit accounts.
31. The terms of payment for gas transportation are determined by the gas transportation contract on the basis of tariffs for its transportation, established in the manner determined by the federal executive authorities.
VII. Rights and obligations of the parties under the agreement
32. The parties fulfill contractual obligations in accordance with the Civil Code of the Russian Federation, other laws and legal acts of the Russian Federation and these Rules.
33. According to the authorities monitoring the safety of gas use, the supply of gas must be immediately stopped without prior warning in cases of unsatisfactory condition of gas-using installations of buyers creating emergency situation and a threat to the lives of service personnel and the population.
34. The supplier has the right to reduce or completely stop the supply of gas to customers (but not below the gas consumption reservation) in the event of repeated violation of payment terms for the supplied gas and (or) for its transportation, with the exception of consumers, the list of which is approved by the Government of the Russian Federation.
The decision to stop gas supplies is valid until the circumstances that served as the basis for making such a decision are eliminated.
35. The supplier is obliged to ensure gas quality in accordance with regulatory requirements.
36. Gas odorization is carried out in accordance with regulatory and technical documentation.
37. The supplier, gas transportation and gas distribution organizations and the buyer are, in accordance with the established procedure, responsible for the technical condition of their gas supply facilities and compliance with operational dispatch discipline.
38. The supplier, gas transportation and gas distribution organizations and the buyer are obliged to immediately notify each other about accidents and malfunctions at gas supply facilities leading to a disruption in the supply or receipt of gas.
39. The gas distribution organization provides, at the request of the supplier, operational information on the gas consumption regime and the status of payments for gas supplied to customers.
40. The gas transportation organization provides, at the request of the gas distribution organization, operational information on the volumes and modes of gas supply for each gas distribution station.
VIII. Responsibility for violation of these Rules
41. The supplier, gas transportation and gas distribution organizations and the buyer are responsible for violation of these Rules in accordance with the legislation of the Russian Federation and the contract.
About approval of the list heavy work and work with harmful or dangerous conditions labor in which the use of women's labor is prohibited
GOVERNMENT OF THE RUSSIAN FEDERATION RESOLUTION dated February 25, 2000 N 162 Moscow On approval of the list of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited In accordance with article 10 Federal Law “On the fundamentals of labor protection in the Russian Federation” (Collection of Legislation of the Russian Federation, 1999, No. 29, Art. 3702) The Government of the Russian Federation decides: To approve the attached list of heavy work and work with hazardous or hazardous working conditions, during which the use of women’s labor is prohibited. Chairman of the Government of the Russian Federation V. Putin __________________________ APPROVED by Decree of the Government of the Russian Federation of February 25, 2000 N 162 LIST of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited I. WORK ASSOCIATED WITH LIFTING AND MOVEMENT OF HEAVIES MANUALLY 1. Work associated with lifting and moving heavy objects manually, in case of exceeding the established norms of maximum permissible loads for women when lifting and moving heavy objects manually II. UNDERGROUND WORK 2. Underground work in the mining industry and in the construction of underground structures, with the exception of work performed by women holding leadership positions and not performing physical work; women engaged in sanitation and household services; women undergoing training and admitted to internships in the underground parts of the organization; women who must go down from time to time into the underground parts of the organization to perform work of a non-physical nature (the list of positions of managers, specialists and other workers associated with underground work, in which the use of female labor is permitted, as an exception, is given in paragraph 2 of the notes to this list) III. METAL WORKING Foundry work Works performed by profession and certain categories of workers: 3. Cupola worker 4. Casting beater, engaged in manual knocking 5. Charge loader in cupolas and furnaces, busy loading the charge manually 6. Casting welder 7. Metal pourer 8. Chopper, engaged in work with pneumatic tools 9. Melter of metal and alloys 10. Workers engaged in hanging hot castings on a conveyor and servicing and repairing equipment in the tunnels of foundries Welding work Work performed by profession: 11. Gas welder and electric welder of manual welding, working in closed containers (tanks, boilers, etc.), as well as on high-rise communication structures (towers, masts) over 10 meters and steeplejack work Boiler rooms, cold forming, drawing and pressing work Works performed by profession: 12. Boilermaker 13. Turner on lathe-spinning machines, engaged in manual work 14. Embosser, engaged in work with hand-held pneumatic tools Press-forging and thermal work Works performed by profession: 15. Bander, engaged in hot work 16. Spring operator, engaged in hot work when winding springs from wire with a diameter of more than 10 mm 17. A roller engaged in rolling out rings in a hot state 18. A springer in the processing of hot metal Metal coating and painting 19. Sealing inside caisson tanks 20. Constant work on lead plating using the hot method (not galvanic) Metalworking and metalworking-assembly work Works performed by profession: 21. Pneumatic driller, performing work with a pneumatic tool that transmits vibration to the hands of the worker 22. Repairman, engaged in: setting up equipment in workshops and departments: hot-rolling, pickling, enameling, insulation with the use of organosilicon varnishes and lead coating in cable production; on hot repairs of selenium and shoeing devices (equipment); setting up equipment in workshops and departments for the preparation and use of organosilicon varnishes and varnishes containing 40 percent or more of toluene, xylene; repair of equipment in closed fuel warehouses and oil facilities at thermal power plants, as well as repair of equipment in tunnels and heating chambers in heating networks; maintenance of water jacket furnaces in the production of non-ferrous metals and alloys; adjustment and repair of chill molds in a hot state; directly in the shops: mill, lubricating, forming, foundry, pipe-filling, gleymixing and assembly shops in the production of lead batteries; repair of technological equipment at engine testing stations, running on leaded gasoline and located in boxes Work with lead 23. Smelting, casting, rolling, drawing and stamping of lead products, as well as leading of cables and soldering of lead batteries IV. CONSTRUCTION, INSTALLATION AND REPAIR WORK 24. Hot repair of furnaces and boiler furnaces 25. Uprooting stumps 26. Fastening structures and parts using a construction gun 27. Slab breaking work, dismantling buildings and structures 28. Punching holes (furrows, niches and etc.) in concrete, reinforced concrete and stone (brick) structures manually and using pneumatic tools Work performed by profession: 29. Reinforcement worker engaged in manual installation of frames, manual, bending machines and scissors 30. Asphalt concrete worker, asphalt concrete welder, working manually 31. Hydromonitor 32. Excavator, engaged in digging wells 33. Bricklayer, engaged in laying modular solid sand-lime bricks 34. Roofer on steel roofs 35. Caisson operator, caisson operator, caisson mechanic, caisson electrician 36. Motor grader operator 37. Asphalt dispenser operator, pit driver 38. Concrete pumping unit operator, mobile bitumen melting unit operator 39. Bulldozer operator 40. Grader-elevator operator 41. Mobile asphalt concrete mixer operator 42. Paving operator chica asphalt concrete 43 Driver of a single-bucket excavator, operator of a rotary excavator (ditch digger and trencher) 44. Driver of a mobile electric welding unit with an internal combustion engine 45. Driver of a mobile power station, working at a power station with an internal combustion engine with a capacity of 150 hp. With. and more 46. Communications installer - antenna operator engaged in work at heights 47. Installer for the installation of steel and reinforced concrete structures when working at heights and steeplejack work 48. Lead solderer (lead soldering worker) 49. Carpenter 50. Plumber engaged in sewer repair networks 51. Pipe-laying of industrial reinforced concrete pipes 52. Pipe-laying of industrial brick pipes V. MINING Open-pit mining and the surface of existing and under construction mines and mines, enrichment, agglomeration, briquetting Works performed in the general professions of mining and capital works: 53. Blast-hole driller 54 Blasting operator, master blaster 55. Miner for the prevention and extinguishing of fires 56. Delivery of fastening materials into the mine 57. Fastener 58. Blacksmith-driller 59. Drilling rig operator 60. Loading machine operator 61. Operator of an installation for drilling shafts of full-section mines 62 . Excavator operator 63. Tipper, engaged in manually rolling up and rolling away trolleys 64. Miner 65. Shaftman, engaged in feeding trolleys into cages manually 66. Cleaner, engaged in cleaning bunkers 67. Electrician (fitter) on duty and equipment repair, engaged in maintenance and repair equipment, mechanisms, water and air lines in mining operations Work performed in the general professions of beneficiation, agglomeration, briquetting and certain categories of workers: 68. Crusher engaged in crushing hot pitch in the production of alumina 69. A roaster engaged in the process of roasting raw materials and materials in the production of mercury 70. Workers and foremen of processing and crushing and sorting factories, mines, shafts and metallurgical enterprises engaged in crushing, grinding, grinding and blending of ores of ferrous, non-ferrous and rare metals, fluorspar and coal, which generate dust containing 10 percent or more free silicon dioxide when performing work manually 71. Workers employed in lead enrichment shops 72. Workers and craftsmen engaged in the enrichment of niobium (loparite) ores Construction of subways, tunnels and underground structures special purpose Works performed by profession: 73. Mining equipment installer 74. Surface miner Mining of ores Works performed by profession: 75. Placer miner 76. Chisel operator 77. Dredger 78. Dredge sailor 79. Dredge operator 80. Jet operator Mining and processing of peat Works performed by profession: 81. Ditcher 82. Uprooter 83. Operator of machines for the extraction and processing of sod peat 84. Operator of machines for preparing peat deposits for operation 85. Operator of a peat excavator 86. Peat worker engaged in felling trees, lining peat bricks Processing of brown coals and ozokerite ores Works performed by profession: 87. Operator for the production of rock wax 88. Operator for the production of ozokerite and ozokerite products 89. Crusher 90. Briquette press operator 91. Filling machine operator VI. GEOLOGICAL EXPLORATION AND TOPOGRAPHIC-GEODETIC WORKS Works performed by profession: 92. Blasting operator, master blaster 93. Installer of geodetic signs 94. Electrical fitter (fitter) on duty and equipment repair, engaged in field conditions VII. WELL DRILLING Works performed by profession: 95. Driller for production and exploration drilling of oil and gas wells 96. Derrick erector, derrick-welder, derrick-electrician 97. Drilling rig operator 98. Well cementing operator 99. Cementing unit operator, cement mechanic -sand mixing unit 100. Pipe pressure tester 101. Assistant driller for production and exploration drilling of oil and gas wells (first) 102. Assistant driller for production and exploration drilling of oil and gas wells (second) 103. Preparer drilling fluid , engaged in preparing the solution manually 104. A mechanic for servicing drilling rigs, directly employed at drilling rigs 105. A repairman engaged in repairing drilling equipment 106. Installer of drill joints 107. Electrician for servicing drilling rigs VIII. OIL AND GAS PRODUCTION Work performed by profession and certain categories of workers: 108. Well workover driller 109. Driller of a floating drilling unit at sea 110. Operator of a mobile steam dewaxing unit 111. Operator of a mobile compressor 112. Operator of a lift 113. Operator of a washing unit 114 Operator for hydraulic fracturing 115. Operator for preparing wells for capital and underground repairs 116. Operator for underground repairs of wells 117. Operator for chemical treatment of wells 118. Assistant driller for capital repairs of wells 119. Assistant driller for a floating drilling unit at sea 120. Workers , managers and specialists constantly engaged in underground oil production 121. Fitter for installation and repair of the foundations of offshore drilling rigs and racks 122. Fitter-repairman engaged in the installation and maintenance of process equipment and repair of oilfield equipment 123. Electrician for the repair and maintenance of electrical equipment, engaged in the maintenance and repair of technological equipment IX. FERROUS METALLURGY Works performed in general professions: 124. Ladle worker, working with molten metal 125. Metal heater, working in methodical, chamber furnaces and wells of rolling and pipe production 126. Processor of surface defects of metal, working with pneumatic tools Blast furnace production Works performed by profession: 127. Top blast furnace 128. Blast furnace plumber 129. Blast furnace forge 130. Scale car operator 131. Skip Steelmaking Works performed by profession: 132. Charging machine operator 133. Mikserova 134. Block stuffer 135. Furnace for iron recovery and annealing of iron powders 136. Deoxidizer melter 137. Converter steelmaker's helper 138. Open hearth furnace steelmaker's helper 139. Steelmaker's helper for electroslag remelting installation 140. Electric furnace steelmaker's helper 141. Steel pourer 142. Converter steelmaker 143. Steelmaker open hearth furnaces 144. Steelmaker of electroslag remelting installation 145. Steelmaker of electric furnace Rolling production Works performed by profession: 146. Hot rolling mill roller 147. Pitch cooker 148. Helper of the hot rolling mill roller 149. Presser-stitcher of rail fastenings 150. Fitter-wire worker engaged in section rolling production Pipe production Works performed by profession: 151. Calibrating mill roller 152. Hot rolling mill operator rolled pipes 153. Roller of a pipe furnace welding mill 154. Roller of a cold pipe rolling mill 155. Roller of a pipe forming mill 156. Pipe drawer employed in non-mechanized mills 157. Pipe calibrator on a press 158. Blacksmith on hammers and presses 159. Helper of a hot rolling mill roller pipes 160. Assistant to the roller of a cold rolling mill for pipes Ferroalloy production Works performed by profession and certain categories of workers: 161. Miner of ferroalloy furnaces 162. Smelter engaged in melting and granulating molten vanadium pentoxide 163. Ferroalloy smelter 164. Workers involved in the smelting of silicon alloys in open arc furnaces 165. Workers engaged in the production of metal chromium and chromium-containing alloys by an aluminothermic method Coke production 166. Work associated with direct employment in the production of benzene, its hydrotreating and rectification Works performed by profession: 167. Bariller 168. Door maker 169. Crusher 170. Hatch 171. Scrubber-pumper engaged in servicing the phenol installation in the coking product recovery shop 172. Repairman engaged in servicing coke oven batteries X. NON-FERROUS METALLURGY Works performed in general professions: 173. Anode pourer engaged in pouring the bottom sections of anodes in the production of aluminum, silumin and silicon 174. Installer for the repair of baths, engaged in drilling a recess for the cathode rod in the production of aluminum, silumin and silicon 175. Melter 176. Calciner 177. Repairman, electrician for the repair and maintenance of electrical equipment, employed in the main metallurgical shops 178. Sinterer 179. Charger engaged in work at furnaces in tin production Production of non-ferrous and rare metals, production of powders from non-ferrous metals 180. Work performed by workers and craftsmen employed in shops (departments and sections) for the production of titanium tetrachloride (tetrachloride) 181. Work performed by workers and craftsmen employed in the loparite concentrate chlorination shops 182. Work performed by workers and craftsmen employed in the shops (departments and sections) of tetrachloride recovery and metal separation in the production of metallic titanium 183. Work performed by workers and craftsmen employed in the departments (areas) of chlorination and rectification of titanium raw materials (slag) 184. Work performed by workers employed in the department of slag processing by sublimation at a fuming installation in tin production 185. Work performed by workers engaged in smelting shops, as well as for processing cinders in the production of mercury Works performed by profession: 186. Anode operator in aluminum production 187. Titanium sponge beater 188. Metal pourer 189. Cathode operator 190. Converter operator 191. Condenser operator 192. Reaction apparatus installer, employed on the installation and dismantling of baths and furnaces, on the repair and restoration of reaction devices 193. Mercury beater 194. Furnace in the production of zinc dust 195. Furnace on Waelz furnaces 196. Furnace on the reduction and distillation of titanium and rare metals 197. Furnace for the recovery of nickel powder 198. Furnace for processing titanium-containing and rare-earth materials 199. Electrolyte bath sludge operator, engaged in manual cleaning of baths 200. Molten salt electrolyzer Processing of non-ferrous metals by pressure 201. Work performed by a hot metal roller engaged in rolling non-ferrous metals and their alloys Production of aluminum by electrolytic method 202. Work performed by workers and craftsmen Alumina production 203. Work performed by a loader operator engaged in repair work in hard-to-reach places of pneumatic and hydraulic loaders XI. REPAIR OF EQUIPMENT OF POWER PLANTS AND NETWORKS Work performed by profession: 204. Electrician for repair of overhead lines
Added to the site:
Approval date:
GOVERNMENT OF THE RUSSIAN FEDERATION
RESOLUTION
ABOUT APPROVAL OF THE LIST
USE OF WOMEN'S LABOR
In accordance with Article 10 of the Federal Law “On the Fundamentals of Labor Safety in the Russian Federation” (Collection of Legislation of the Russian Federation, 1999, No. 29, Art. 3702), the Government of the Russian Federation decides:
Approve the attached list of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited.
Chairman of the Government
Russian Federation
Approved
Government Decree
Russian Federation
SCROLL
HEAVY WORK AND WORK WITH HARMFUL OR DANGEROUS
WORKING CONDITIONS, WHEN IMPLEMENTATION OF WHICH IS PROHIBITED
USE OF WOMEN'S LABOR
I. Work related to lifting and moving heavy objects manually
1. Work related to lifting and moving heavy objects manually, in case of exceeding the established norms of maximum permissible loads for women when lifting and moving heavy objects manually
II. Underground works
2. Underground work in the mining industry and in the construction of underground structures, with the exception of work performed by women holding leadership positions and not performing physical work; women engaged in sanitation and household services; women undergoing training and admitted to internships in the underground parts of the organization; women who must go down from time to time into the underground parts of the organization to perform work of a non-physical nature (the list of positions of managers, specialists and other workers associated with underground work, in which the use of female labor is permitted, as an exception, is given in paragraph 2 of the notes to this list)
III. Metalworking
Foundry work
3. Cupola maker
4. Casting beater engaged in manual knocking
5. Batch loader in cupolas and furnaces, busy loading the batch manually
6. Casting welder
7. Metal pourer
8. Chopper working with pneumatic tools
9. Melter of metal and alloys
10. Workers engaged in hanging hot castings on a conveyor and servicing and repairing equipment in foundry tunnels
Welding work
11. Gas welder and electric welder of manual welding, working in closed containers (tanks, boilers, etc.), as well as on high-rise communication structures (towers, masts) over 10 meters and steeplejack work
Boiler rooms, cold forming, drawing
and pressing works
Work performed by profession:
12. Boilermaker
13. A turner on turning and pressing machines, engaged in manual work
14. A chaser working with hand-held pneumatic tools
Forging, pressing and thermal works
Work performed by profession:
15. A bandage worker engaged in hot work
16. A spring operator engaged in hot work when winding springs from wire with a diameter of over 10 mm
17. Roller busy rolling out rings while hot
18. Spring operator at hot metal processing
Metal coating and painting
19. Sealing inside caisson tanks
20. Constant work on lead plating using the hot method (not galvanic)
Metalwork and metalwork - assembly works
Work performed by profession:
21. A driller is a pneumatic operator who performs work with a pneumatic tool that transmits vibration to the worker’s hands
22. Mechanic - repairman, busy:
adjustment of equipment in workshops and departments: hot rolling, pickling, enameling, insulation using silicone varnishes, lead plating in cable production;
on hot repairs of selenium and shoeing devices (equipment);
setting up equipment in workshops and departments for the preparation and use of organosilicon varnishes and varnishes containing 40 percent or more of toluene, xylene;
repair of equipment in closed fuel warehouses and oil facilities at thermal power plants, as well as repair of equipment in tunnels and heating chambers in heating networks;
maintenance of water jacket furnaces in the production of non-ferrous metals and alloys;
adjustment and repair of chill molds in a hot state;
directly in the shops: mill, lubricating, forming, foundry, pipe-filling, gleymixing and assembly shops in the production of lead batteries;
repair of technological equipment at engine testing stations, running on leaded gasoline and located in boxes
Working with lead
23. Smelting, casting, rolling, drawing and stamping of lead products, as well as lead coating of cables and soldering of lead batteries
IV. Construction, installation and repair work
24. Hot repair of furnaces and boiler furnaces
25. Uprooting stumps
26. Fastening structures and parts using a construction and assembly gun
27. Slab breaking works, dismantling of buildings and structures
28. Punching holes (grooves, niches, etc.) in concrete, reinforced concrete and stone (brick) structures manually and using pneumatic tools
Work performed by profession:
29. An armature worker engaged in manual installation of frames, manual bending machines and scissors
30. Asphalt concrete worker, asphalt concrete worker - welder, working manually
31. Hydraulic monitor
32. A digger engaged in sinking wells
33. A mason engaged in laying modular solid sand-lime bricks
34. Roofer for steel roofs
35. Caisson operator - operator, caisson operator - tunneler, caisson operator - mechanic, caisson operator - electrician
36. Motor grader operator
37. Asphalt dispenser driver, pit driver
38. Operator of a concrete pumping unit, operator of a mobile bitumen melting unit
39. Bulldozer driver
40. Grader-elevator driver
41. Operator of a mobile asphalt concrete mixer
42. Asphalt concrete paver operator
43. Driver of a single-bucket excavator, operator of a rotary excavator (ditch digger and trencher)
44. Operator of a mobile electric welding unit with an internal combustion engine
45. A mobile power plant operator working at a power plant with an internal combustion engine with a capacity of 150 hp. and more
46. Communications installer - antenna operator busy working at heights
47. Installer for installation of steel and reinforced concrete structures when working at height and steeplejack work
48. Lead solder (lead solder)
49. Carpenter
50. Fitter - plumber repairing the sewer network
51. Pipe laying of industrial reinforced concrete pipes
52. Pipe laying industrial brick pipes
V. Mining operations
Open pit mining and surface mining
and mines and mines under construction, enrichment, agglomeration,
briquetting
Work performed in general mining and capital mining professions:
53. Hole driller
54. Detonator, master - detonator
55. Miner for fire prevention and extinguishing
56. Delivery of fastening materials to the mine
57. Fastener
58. Blacksmith - drilling refueling operator
59. Drilling rig operator
60. Loader operator
61. Machine operator for drilling full-section mine shafts
62. Excavator operator
63. Tipper engaged in manual rolling and rolling away of trolleys
64. Miner
65. Stemman, busy manually feeding trolleys into cages
66. Cleaner busy cleaning bins
67. Electrical mechanic (mechanic) on duty and for equipment repair, engaged in the maintenance and repair of equipment, mechanisms, water and air lines in mining operations
Work performed in the general professions of beneficiation, agglomeration, briquetting and certain categories of workers:
68. A crusher engaged in crushing hot pitch in the production of alumina
69. A roaster engaged in the process of roasting raw materials and materials in the production of mercury
70. Workers and foremen of processing and crushing and sorting factories, mines, mines and metallurgical enterprises those engaged in crushing, grinding, grinding and blending of ferrous, non-ferrous and rare metal ores, fluorspar and coal, which generate dust containing 10 percent or more free silicon dioxide when performing work manually
71. Workers employed in lead enrichment shops
72. Workers and craftsmen engaged in the enrichment of niobium (loparite) ores
Construction of subways, tunnels and underground
special purpose structures
Work performed by profession:
73. Mining equipment installer
74. Miner at surface works
Ore mining
Work performed by profession:
75. Placer miner
76. Bit refueler
77. Drager
78. Dredge sailor
79. Dredge driver
80. Rocket launcher operator
Extraction and processing of peat
Work performed by profession:
81. Ditchman
82. Groomer
83. Operator of machines for the extraction and processing of sod peat
84. Operator of machines for preparing peat deposits for operation
85. Peat excavator operator
86. A peat worker engaged in felling trees and laying peat bricks
Processing of brown coals and ozokerite ores
Work performed by profession:
87. Mountain wax production operator
88. Ozokerite and ozokerite products production operator
89. Crusher
90. Briquette press operator
91. Filling machine operator
VI. Geological exploration and topographic and geodetic works
Work performed by profession:
92. Detonator, master - detonator
93. Installer of geodetic signs
94. Electrical mechanic (fitter) on duty and equipment repair, employed in the field
VII. Drilling of the wells
Work performed by profession:
95. Driller for production and exploration drilling of oil and gas wells
96. Derrick assembler, derrick assembler - welder, derrick erector - electrician
97. Drilling rig operator
98. Well cementing operator
99. Motorist of a cementing unit, motorist of a cement-sand mixing unit
100. Pipe crimper
101. Assistant driller for production and exploration drilling of oil and gas wells (first)
102. Assistant driller for production and exploration drilling of oil and gas wells (second)
103. Drilling mud maker engaged in manual preparation of mud
104. Drilling rig maintenance mechanic, directly employed on drilling rigs
105. Mechanic - repairman engaged in repairing drilling equipment
106. Tool joint installer
107. Electrician for drilling rig maintenance
VIII. Mining of oil and gas
108. Well workover driller
109. Driller of a floating drilling unit at sea
110. Operator of a steam mobile dewaxing unit
111. Mobile compressor operator
112. Lift operator
113. Washing unit operator
114. Hydraulic fracturing operator
115. Operator for preparing wells for major and underground repairs
116. Underground well repair operator
117. Well chemical treatment operator
118. Assistant driller for major workover of wells
119. Assistant driller of a floating drilling unit at sea
120. Workers, managers and specialists constantly engaged in underground oil production
121. Mechanic for installation and repair of foundations of offshore drilling rigs and racks
122. Mechanic - a repairman engaged in the installation and maintenance of process equipment and repair of oilfield equipment
123. Electrician for the repair and maintenance of electrical equipment, engaged in the maintenance and repair of technological equipment
IX. Ferrous metallurgy
124. Ladle worker working with molten metal
125. Metal heater engaged in work in methodical, chamber furnaces and wells of rolling and pipe production
126. Processor of surface defects of metal, engaged in work with pneumatic tools
Blast furnace production
Work performed by profession:
127. Top blast furnace
128. Blast Furnace Plumber
129. Blast furnace hearth
130. Car driver - scales
131. Skipova
Steelmaking
Work performed by profession:
132. Filling machine operator
133. Mixerova
134. Block stuffer
135. Furnace reduction of iron and annealing of iron powders
136. Melter of deoxidizers
137. Converter steelmaker's helper
138. Helper of the open-hearth furnace steelmaker
139. Helper of a steelmaker at an electroslag remelting installation
140. Electric furnace steelmaker's helper
141. Steel pourer
142. Converter steelmaker
143. Open hearth furnace steelmaker
144. Steelmaker of electroslag remelting plant
145. Electric furnace steelmaker
Rolling production
Work performed by profession:
146. Hot rolling mill roller
147. Pitch cook
148. Hot rolling mill operator's helper
149. Presser - stitcher of rail fastenings
150. A mechanic is a conductor engaged in long-rolling production
Pipe production
Work performed by profession:
151. Calibrating mill roller
152. Roller of a hot pipe rolling mill
153. Roller of a furnace pipe welding mill
154. Roller of a cold pipe rolling mill
155. Roller of a pipe forming mill
156. Pipe drawer employed in non-mechanized mills
157. Pipe calibrator on a press
158. Blacksmith on hammers and presses
159. Helper of a rolling mill for hot rolling of pipes
160. Helper of the roller of a cold pipe rolling mill
Ferroalloy production
Work performed by profession and certain categories of workers:
161. Forge of ferroalloy furnaces
162. Melter engaged in melting and granulating molten vanadium pentoxide
163. Ferroalloy smelter
164. Workers engaged in the smelting of silicon alloys in open arc furnaces
165. Workers engaged in the production of metal chromium and chromium-containing alloys by an aluminothermic method
Coke production
166. Work related to direct employment in the production of benzene, its hydrotreating and rectification
Work performed by profession:
167. Barilletchik
168. Door
169. Crusher
170. Luke
171. Scrubber operator - pump operator engaged in servicing the phenol installation in the coking product recovery shop
172. Mechanic - repairman engaged in servicing coke oven batteries
X. Non-ferrous metallurgy
Work performed in general professions:
173. Anode pourer engaged in pouring anode bottom sections in the production of aluminum, silumin and silicon
174. An installer repairing bathtubs, engaged in drilling a recess for a cathode rod in the production of aluminum, silumin and silicon
175. Melter
176. Calcifier
177. Mechanic - repairman, electrician for the repair and maintenance of electrical equipment, employed in the main metallurgical shops
178. Sinterer
179. A charger working at furnaces in the production of tin
Production of non-ferrous and rare metals, production of non-ferrous metal powders
180. Work performed by workers and craftsmen employed in workshops (departments and areas) for the production of titanium tetrachloride (tetrachloride)
181. Work performed by workers and craftsmen employed in the loparite concentrate chlorination shops
182. Work performed by workers and craftsmen employed in workshops (departments and areas) for the recovery of tetrachloride and metal separation in the production of titanium metal
183. Work performed by workers and craftsmen employed in departments (areas) of chlorination and rectification of titanium raw materials (slag)
184. Work performed by workers employed in the department of slag processing by sublimation at a fuming installation in tin production
185. Work performed by workers employed in smelting shops, as well as in the processing of cinders in the production of mercury
Work performed by profession:
186. Anode operator in aluminum production
187. Titanium sponge knocker
188. Pourer - metal pourer
189. Cathode
190. Converter
191. Capacitor
192. Installer of reaction apparatuses, engaged in the installation and dismantling of baths and furnaces, in the repair and restoration of reaction apparatuses
193. Mercury chopper
194. Pechevoy in the production of zinc dust
195. Pechevoy on Welzkilns
196. Pechevoy on the recovery and distillation of titanium and rare metals
197. Furnace for the recovery of nickel powder
198. Furnace for processing titanium-containing and rare earth materials
199. Electrolyte bath sludge operator, engaged in manual cleaning of baths
200. Molten salt electrolyser
Pressure processing of non-ferrous metals
201. Work performed by a hot metal roller engaged in rolling non-ferrous metals and their alloys
Aluminum production by electrolytic method
202. Work performed by workers and craftsmen
Alumina production
203. Work performed by a loader operator engaged in repair work in hard-to-reach places of pneumatic and hydraulic loaders
XI. Repair of power plant equipment and networks
Work performed by profession:
204. Electrician for repair of overhead power lines, engaged in steeplejack work repairing high-voltage power lines
205. Electrician for the repair and installation of cable lines, engaged in the repair of cable glands with lead litharge and soldering of lead cable couplings and sheaths
XII. Abrasives production
Work performed by profession:
206. Balancer - pourer of abrasive wheels, engaged in pouring lead into abrasive products
207. Bulldozer operator engaged in hot dismantling of resistance furnaces in the production of abrasives
208. Melter of abrasive materials
209. Podina worker employed in the corundum workshop
210. Resistance furnace dismantler employed in the silicon carbide production shop
XIII. Electrical production
Work performed in general professions:
211. Mercury distiller
212. Mercury rectifier molder performing work with open mercury
Electrocoal production
213. Work performed by workers on pitch smelting
Cable production
Work performed by profession:
214. Lead or aluminum cable crimper engaged in hot lead crimping
215. Remover of sheaths from cable products, engaged in removing only lead sheaths
Production of chemical power sources
Work performed by profession:
216. Foundry worker of lead alloy products
217. Dry mass mixer (for lead batteries)
218. Melter of lead alloys
219. Battery plate cutter engaged in stamping - separating formed lead plates
XIV. Radio engineering and electronic production
Work performed by profession:
220. Tester of parts and devices, engaged in testing devices in thermobaric chambers at a temperature of +28 degrees. C and above and -60 degrees. C and below, provided you are directly in them
221. Caster of magnets on furnaces - crystallizers
222. Melter of shopalloy and bismuth
XV. Aircraft production and repair
Work performed by profession:
223. A mechanic for repairing aircraft engines and a mechanic for repairing units engaged in the repair of engines and units running on leaded gasoline
XVI. Shipbuilding and ship repair
Work performed by profession:
224. Reinforcement worker of reinforced concrete ships, engaged in work on vibrating tables, vibrating platforms, cassette installations and with manual vibrators
225. Ship bender engaged in hot bending
226. Boilermaker
227. Painter, ship insulator, engaged in painting work in tanks, second bottom areas, warm boxes and other hard-to-reach areas of ships, as well as in work on cleaning old paint in these areas of ships
228. Coppermaker for the manufacture of ship products, engaged in hot work
229. Ship carpenter working in closed compartments of ships
230. Workers of the commissioning team at mooring, factory and state tests
231. A ship's hewer engaged in work with hand-held pneumatic tools
232. An assembler of metal ship hulls, engaged in sectional, block and slipway assembly of surface ships, constantly combining his work with electric tack, gas cutting and metal processing with hand-held pneumatic tools, as well as ship repair
233. Mechanic - mechanic for testing installations and equipment, engaged in adjusting and testing marine diesel engines in enclosed spaces and inside ships
234. Fitter - ship assembler, engaged in installation inside ships during repairs
235. A mechanic is a ship repairman engaged in work inside ships
236. Shipbuilder - repairman
237. Ship rigger
238. Ship's pipefitter
XVII. Chemical production
Work performed in chemical production by profession and certain categories of workers:
239. Melting operator engaged in smelting and refining pitch
240. Steamer engaged in tearing - steaming rubber
Production of inorganic products
Calcium carbide production
241. Workers, shift managers and specialists employed in furnaces and manual crushing of carbide
Phosgene production
242. Workers, shift managers and specialists engaged in technological stages
Production of mercury and its compounds
243. Workers, shift managers and specialists engaged in technological stages, except for remotely controlled production
Production of yellow phosphorus
244. Workers, shift managers and specialists directly involved in the maintenance of mine slot furnaces, roasting and sintering furnaces, fines granulation plants, in phosphorus electric sublimation departments, in the filling of phosphorus tanks, in the maintenance of phosphorus storage tanks, phosphorus sludge, sludge distillation and in the processing of fire-liquids slag
Production of phosphorus trichloride and phosphorus pentasulphide
245. Workers, shift managers and specialists engaged in technological stages
Production of chlorine using the mercury method
246. Workers engaged in technological stages
Production of liquid chlorine and chlorine dioxide
247. Workers engaged in technological stages
Carbon disulfide production
248. Workers, shift managers and specialists employed in the retort and condensation departments
Work with fluorine, hydrogen fluoride and fluorides
249. Workers, managers and specialists (except for work performed in laboratories using hydrofluoric acid and fluorides)
Production of arsenic and arsenic compounds
250. Workers, shift managers and specialists engaged in technological stages
Production of silicon tetrachloride
251. Workers, shift managers and specialists engaged in technological stages
Production of technical iodine
252. Workers engaged in squeezing iodine
Production of organic products
Production of benzathrone and its chlorine
and bromo derivatives, vilontron
253. Workers, shift managers and specialists engaged in technological stages
Production of aniline, paranitroaniline,
aniline salts and fluxes
254. Workers, shift managers and specialists engaged in technological stages
Production of benzidine and its analogues
255. Workers, managers, specialists and other employees employed directly in production and at the dissolution station of these products
Production of carbon tetrachloride,
golovaksa, rematol, sovol
256. Workers, shift managers and specialists engaged in technological stages
Production of chloropicrin
257. Workers, shift managers and specialists engaged in technological stages
Production of catalysts containing arsenic
258. Workers, shift managers and specialists engaged in technological stages
Production of ziram, mercury- and arsenic-containing pesticides
259. Workers, shift managers and specialists engaged in technological stages
Chloroprene production
260. Workers, shift managers and specialists engaged in technological stages
Production of chloroprene rubber and latex
261. Workers involved in the technological stages of polymerization and product separation
Production of ethyl liquid
262. Workers, managers and specialists engaged in technological stages
Production of benzene, toluene, xylene
263. Workers, shift managers and specialists engaged in technological stages
Paint and varnish production
Production of lead litharge and red lead, lead crowns, white lead, green lead and jurmedite
264. Workers, shift managers and specialists engaged in technological stages
Production chemical fibers and threads
265. Regeneration operator engaged in the regeneration of carbon disulfide
Production of fiberglass products based on synthetic resins (phenol-formaldehyde, epoxy, unsaturated polyester resins)
266. Operators engaged in contact molding of large-sized products with an area of 1.5 square meters. m or more
Production of medicines, medical, biological preparations and materials
Antibiotic production
267. A filtration operator engaged in manual disassembly and assembly of filter presses with a frame size of more than 500 mm
Obtaining morphine from raw opium
268. A filtration operator engaged in manual disassembly and assembly of filter presses with a frame size of more than 500 mm
Androgen production
269. Operator for the production of synthetic hormones, engaged in the production of testosterone preparations and its derivatives
XVIII. Production and processing of rubber compounds
Work performed by profession:
270. Vulcanizer engaged in loading and unloading products in boilers over 6 meters long, vulcanizing propeller shafts
271. Rubber mixer operator
272. Workers employed in the departments: cold vulcanization, production of radol and facts
273. Repairer of rubber products, engaged in the manufacture and repair of large rubber parts and products, vulcanization of reinforced parts (large tires, rubber fuel tanks, reservoirs, conveyor belts, etc.)
Production, retreading and repair of tires
274. Work performed by a vulcanizer, tire collector (heavy duty)
XIX. Processing of oil, gas, shale and coal, production of synthetic petroleum products, petroleum oils and lubricants
Work performed by profession and certain categories of workers:
275. Coke cleaner
276. Coke unloader
277. Workers, shift managers and specialists employed in technological installations gasoline leading
278. Workers employed in extraction shops and departments of aromatic hydrocarbons production
279. Workers engaged in the preparation of arsenic solutions for the purification of sulfur-containing oil gas
XX. Logging and rafting
Logging work
280. Loading and unloading of round timber (except for pulpwood, mine stand and firewood up to 2 meters long)
281. Stacking of round timber (except for pulpwood, mine stand and firewood up to 2 meters long)
Work performed by profession:
282. Forest feller
283. A lumberjack engaged in felling, bucking logs and hilling logs, chopping firewood, harvesting and cutting tar resin, as well as harvesting wood using hand tools
284. Navalshchik - a timber piler engaged in the creation of inter-operational and seasonal reserves of logs and trees, loading trees, logs and round timber (with the exception of pulpwood, mine stands and firewood up to 2 meters long) onto timber rolling stock and unloading them, performing the work manually
285. Chokerer
Timber rafting
Work performed by profession:
286. Raftsman
287. Rigger engaged in loading and unloading rigging
288. Raft shaper
XXI. Production of pulp, paper, cardboard and products made from them
Work performed by profession:
289. Operator for preparing chemical solutions, working on dissolving chlorine
290. Impregnation operator engaged in the production of anti-corrosion and inhibited paper
291. Cooker of fibrous raw materials
292. Pulp cook
293. Woodpair
294. Pyrite crusher
295. Loader of balances into defibrators
296. Loader of pyrites, sulfur furnaces and turmas
297. Sulphate loader
298. Acid
299. Mixer
300. Acid tank liner
301. Fiber sawmill
302. Impregnator of paper and paper products, engaged in fiber impregnation
303. Sulfurous acid regenerator
304. Mechanic - repairman, lubricator, cleaner of industrial and office premises, electrician for the repair and maintenance of electrical equipment, engaged in the production of sulfite cellulose and sulfurous acid
305. Sodaman
306. Paper (board) machine dryer, employed on high-speed paper and board machines operating at speeds of 400 or more meters per minute
307. Chlorine man
XXII. Cement production
308. Work performed by workers cleaning sludge pools and talkers
XXIII. Stone processing and production of stone foundry products
Work performed by profession:
309. Stone casting pourer
310. Stonemaker
311. Stonecutter
312. Mill operator busy breaking diabase crushed stone into powder
313. Stone processing equipment operator
314. Stone sawyer
315. Stone miller
XXIV. Production of reinforced concrete and concrete products and structures
316. Work as a carver of concrete and reinforced concrete products
XXV. Production of thermal insulation materials
Work performed by profession:
317. Bitumen worker
318. Cupola maker
XXVI. Production of soft roofing and waterproofing materials
319. Work performed by the digester loader
XXVII. Production of glass and glass products
Work performed by profession:
320. Quartz blower (except for those engaged in the manufacture of products with a diameter of up to 100 mm and a wall thickness of up to 3 mm)
321. Quartz smelter
322. Mirror dyer working with mercury
323. Batch compiler engaged in manual work using red lead
324. Halmovschik
XXVIII. Textile and light industry
Work performed in general textile manufacturing professions:
325. Sizing equipment operator engaged in non-mechanized lifting and removal of rollers
326. Locksmith - a plumber engaged in cleaning sewer trenches and wells
Primary processing of cotton
327. Work as a press operator
Penko - jute production
328. Work as a fiber preparer engaged in breaking bales of jute
Wool production
Work performed by profession:
329. Washer of technical cloths
330. Assistant foreman employed in a weaving workshop in the production of cloth
Fulling - felt production
Work performed by profession:
331. Fuller engaged in the production of dense felts
332. Shoe fitter engaged in manual work
333. Shoe remover from lasts, engaged in removing felted shoes by hand
Tanning and leather production
335. Transportation, unloading and loading of large leather raw materials and semi-finished products manually in the soaking and ash shops of leather factories
Work performed by profession:
336. A skinner engaged in turning large leathers on blocks by hand, in the fleshing and breaking of large leather raw materials
337. Leather roller engaged in rolling large and hard leathers on rollers
338. Leather cutter
339. Sorter of products, semi-finished products and materials, engaged in sorting large leather raw materials
340. Cleaner of products, semi-finished products and materials, engaged in cleaning large leathers and large leather raw materials on blocks by hand
Production of leather shoes
341. Work as a molder of parts and products, working on Anklepf type machines
XXIX. Food industry
342. Baling waste from corrugated packaging production
Work performed in general food production professions:
343. Diffusion operator servicing periodic diffusers when loading manually
344. Ice harvester, engaged in collecting ice in reservoirs and laying it in piles
345. Bone charcoal maker
346. Cleaning machine operator engaged in manual dismantling of separators
Production of meat products
Work performed by profession:
347. Livestock fighter engaged in operations of stunning, hooking, bleeding of large and small cattle and pigs; evisceration, manual removal of cattle hides; sawing up carcasses; scalds and scorches of pork carcasses and heads; horizontal processing of cattle carcasses
348. Skin peeler
349. Skin processor
Fish extraction and processing
350. All types of work on fishing, search and receiving and transport sea vessels, with the exception of sea floating crab canneries, fish processing bases, large freezing fishing trawlers and sea refrigerated vessels, where women’s labor is allowed in all jobs, excluding work (professions, positions) , specified in sections XXXII "Maritime transport" and XXXIII "River transport" of this list
351. Manually turning barrels of fish
Work performed by profession:
352. Loader - unloader of food products, engaged in loading grates with canned food into autoclaves manually
353. Processor of sea animals, engaged in fleshing the skins of sea animals
354. A fish processor engaged in pouring - unloading fish manually from vats, chests, ships, slots and other navigable containers; mixing fish in salting vats by hand
355. Presser - a food product squeezer engaged in pressing (squeezing) fish in barrels by hand
356. Receiver of watercraft
357. Coastal fisherman engaged in hand-pulling cast nets, ice fishing on cast nets, set nets and vents
Bakery production
358. Work performed by a dough handler working on dough mixing machines with rolling bowls with a capacity of over 330 liters when moving them manually
Tobacco - makhorka and fermentation production
359. Work performed by an auxiliary worker engaged in transporting bales of tobacco
Perfume and cosmetic production
360. Work performed by a worker engaged in grinding amidochloric mercury
Extraction and production of table salt
Work performed by profession:
361. Salt piler in swimming pools
362. Pool preparer
363. Track worker on the lake
XXX. Rail transport and metro
Work performed by profession and certain categories of workers:
364. Battery worker repairing lead batteries
365. A handcar driver and his assistant working on broad gauge railway lines
366. Freight train conductor
367. Fireman of steam locomotives in the depot
368. Diesel train driver and his assistant
369. A locomotive driver and his assistant working on broad gauge railway lines
370. Locomotive driver and his assistant
371. Diesel locomotive driver and his assistant
372. Traction unit operator and his assistant
373. Electric locomotive driver and his assistant
374. Electric train driver and his assistant
375. Track fitter (if the established norms of maximum permissible loads for women when lifting and moving heavy objects manually are exceeded)
376. Porter engaged in moving luggage and hand luggage
377. Inspector - wagon repairman
378. Puncher - pipe blower
379. Conductor for escorting cargo and special wagons, engaged in escorting cargo on open rolling stock
380. Locomotive boiler cleaner
381. Impregnator of lumber and wood products, engaged in impregnation using oil antiseptics
382. Car speed controller
383. A mechanic for the repair of rolling stock, performing the following work:
for repairing fittings on steam locomotives when washing them warmly;
in fire and smoke boxes;
for blowing the bottom and gutters of electric rolling stock and diesel locomotives with electric transmission;
for disassembling, repairing and assembling drainage devices and safety valves, for inspecting and filling valves for drainage devices in tanks containing petroleum products and chemical products
384. Train compiler, assistant train compiler
385. Contact line electrician employed on electrified railways work at height
386. Workers loading asbestos waste, constantly working in the ballast quarry of asbestos waste
XXXI. Automobile transport
Work performed by profession:
387. A car driver working on a bus with more than 14 seats (except for those employed in intra-factory, intra-city, suburban transportation and transportation in rural areas within one day shift, provided that he is not involved in the maintenance and repair of the bus)
388. A car driver working on a vehicle with a carrying capacity of over 2.5 tons (except for those employed in intra-factory, intra-city, suburban transportation and transportation in rural areas within one day shift, provided that they are not involved in the maintenance and repair of the truck)
389. Automobile repairman manually washing engine parts of a car running on leaded gasoline.
390. A car repair mechanic engaged in running-in an engine using leaded gasoline.
391. Fuel equipment mechanic employed in motor vehicles repairing fuel equipment for carburetor engines running on leaded gasoline.
XXXII. Sea transport
392. Coastal boatswain, coastal sailor, senior coastal sailor (with the exception of those working at passenger berths of local and suburban lines)
393. Ship fireman and boiler operator engaged in servicing boilers on ships and cranes, regardless of the type of fuel burned in the boilers
394. Cranmaster and his assistant
395. Crane operator (crane operator) working on a floating crane and his assistant
396. Machine command staff(mechanics, electromechanics and others) and engine crew (machinists, motorists, electricians, turners and mechanics of all types and others) of ships of all types of fleet
397. Deck crew (boatswain, skipper, mate and sailors of all types) of ships of all types of fleet, as well as floating cleaning stations, docks, floating reloaders of grain, cement, coal and other dust-generating cargo
398. Workers of complex teams and loaders engaged in loading and unloading operations in ports and piers
399. Crew members of all types of fleet, combining work in two positions of deck and engine personnel
XXXIII. River transport
Work performed by profession and position:
400. Loaders, dockers - machine operators (except for dockers - machine operators who constantly work as crane operators, drivers of intra-port transport and workers servicing machines and continuous mechanisms for cargo processing, with the exception of substances belonging to hazard classes 1 and 2)
401. Ship stoker employed on ships operating on solid fuel
402. Sailors of all types of passenger and cargo-passenger ships (except for hydrofoil and planing ships, as well as ships operating on intracity and suburban lines), dredgers, dredgers and mixed river-sea navigation vessels
403. Crane operator (crane operator) working on a floating crane
404. Engine crew of ships of all types of fleet, as well as crew members of ships of all types of fleet, combining work in two positions of deck and engine personnel
XXXIV. civil Aviation
Work performed by profession and certain categories of workers:
405. Aviation mechanic (technician) for airframe and engines, aviation mechanic (technician) for instruments and electrical equipment, aviation mechanic (technician) for radio equipment, aviation technician (mechanic) for parachute and rescue equipment, aviation technician for fuels and lubricants , engineer, directly employed maintenance aircraft (helicopters)
406. Porter engaged in moving baggage and hand luggage at airports
407. Gas station operator busy refueling aircraft leaded gasoline, as well as refueling special vehicles with leaded gasoline
408. Workers engaged in cleaning and repairing the inside of gas turbine aircraft fuel tanks
409. Workers engaged in the preparation of bitumen and repair of runways and taxiways (filling joints) at airfields
XXXV. Connection
410. Operational and maintenance of radio equipment and communication equipment on high-rise buildings (towers, masts) over 10 m high, not equipped with elevators
XXXVI. Printing production
Work related to the use of lead alloys
411. Work on casting operations and finishing of the stereotype
Work performed by profession:
412. Printing equipment adjuster, employed in the areas of casting stereotypes, type, typesetting and whitespace materials
413. Caster
414. Stereotyper
Gravure printing workshops
415. Work in the gravure printing department (except for acceptance and packaging of finished products)
416. Work performed by an intaglio plate etcher
XXXVII. Production of musical instruments
417. Peeling and cleaning of cast iron frames of pianos and grand pianos using abrasive wheels
418. Work performed by a wind instrument parts maker engaged in the manufacture of parts for brass instruments
XXXVIII. Agriculture
419. Performing operations in crop production, livestock farming, poultry farming and fur farming using pesticides, pesticides and disinfectants (under the age of 35)
420. Maintenance of bulls - producers, stallions - producers, boars
421. Loading and unloading of animal corpses, confiscated goods and pathological material
422. Work in wells, slurry tanks and tanks, silos and haylage towers
423. Work as tractor drivers - agricultural production operators
424. Working as truck drivers
425. Removing skins from the corpses of cattle, horses and cutting up carcasses
426. Transportation, loading and unloading of pesticides
427. Laying drainage pipes manually
XXXIX. Work performed in various sectors of the economy
428. Cleaning, scraping and painting work in ship and railway tanks, ship liquid fuel tanks and oil tankers, cofferdams, fore- and afterpeaks, chain boxes, double-bottom and double-hull spaces and other hard-to-reach places
429. Painting work using lead white, lead sulfate or other compositions containing these dyes
430. Installation, repair and maintenance of contact networks, as well as overhead power lines when working at a height of over 10 m
431. Direct fire extinguishing
432. Maintenance of floating craft, dredgers with ship rigging work
433. Cleaning of containers (reservoirs, measuring tanks, tanks, barges, etc.) from sour oil, products of its processing and sulfur-containing petroleum gas
434. Work with metallic mercury in open form (except for workers employed in installations and semi-automatic machines, where effective air exchange in the workplace is ensured)
435. Mixing gasoline with ethyl liquid
436. Cleaning mercury rectifiers
Work performed by profession:
437. Antenna operator - mast
438. Bitumen cooker
439. Snowmobile driver
440. Diver
441. Gas rescuer
442. Mercury dispenser engaged in dosing open mercury manually
443. Wood splitter engaged in manual work
444. Boilermaker repairing hot boilers
445. Boiler cleaner
446. A painter engaged in preparing lead paints by hand
447. A painter engaged in painting inside containers using paints and varnishes containing lead, aromatic and chlorinated hydrocarbons, as well as painting large-sized products in closed cells spray using the same paints and varnishes
448. Crane operator (crane operator) busy working at sea
449. A driver (stoker) of a boiler house engaged in servicing steam and water-heating boilers when loading manually with the consumption per change of solid mineral and peat fuel per driver (stoker) exceeding the established norms of maximum permissible loads for women when lifting and moving heavy objects manually
450. Paratrooper (paratrooper - firefighter)
451. Workers of the engine crew of floating cranes
452. Grinder engaged in grinding pitch
453. Repairman of artificial structures
454. Emergency repair mechanic engaged in cleaning the sewerage network
455. Rigger engaged in installation and dismantling of equipment
456. A cleaner engaged in cleaning pipes, furnaces and flues
2. List of positions of managers, specialists and other workers related to underground work, in which, as an exception, the use of female labor is permitted:
general director, director, chief, technical director, manager, chief engineer of mines and mines for the extraction of coal, ore and non-metallic minerals by underground methods, for the construction of subways, tunnels, mine construction and mine tunneling departments, construction and construction and installation departments and construction and other underground structures, their deputies and assistants; chief, chief engineer of mining workshops and sections, their deputies and assistants; senior engineer, engineer, technician, other managers, specialists and employees who do not perform physical work; engineer, technician, laboratory assistant, other specialists and employees who do not perform physical work and do not permanently stay underground; chief surveyor, senior surveyor, mine surveyor, mine surveyor; chief geologist, chief hydrogeologist, chief hydrologist, mine, mine geologist, geologist, mine, mine hydrogeologist, hydrogeologist, hydrologist;
workers servicing stationary mechanisms that have automatic start and stop, and who do not perform other work related to physical activity; workers undergoing training and admitted to internships in underground parts of organizations;
employees of scientific and educational institutions, design and engineering organizations;
doctor, paramedical and junior medical personnel, bartender and other workers involved in sanitary and consumer services.
Decree of the Government of the Russian Federation of February 25, 2000 N 162
"On approval of the list of heavy work and work with harmful or dangerous working conditions, during which the use of women's labor is prohibited"
In accordance with Article 10 of the Federal Law “On the Fundamentals of Occupational Safety and Health in the Russian Federation” (Collection of Legislation of the Russian Federation, 1999, No. 29, Art. 3702), the Government of the Russian Federation decides:
Approve the attached list of heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited.
Scroll
heavy work and work with harmful or dangerous working conditions, during which the use of women’s labor is prohibited
(approved by Decree of the Government of the Russian Federation of February 25, 2000 N 162)
I. Work related to lifting and moving heavy objects manually
1. Work related to lifting and moving heavy objects manually, in case of exceeding established standards
II. Underground works
2. Underground work in the mining industry and in the construction of underground structures, with the exception of work performed by women holding leadership positions and not performing physical work; women engaged in sanitation and household services; women undergoing training and admitted to internships in the underground parts of the organization; women who must go down from time to time into the underground parts of the organization to perform work of a non-physical nature (the list of positions of managers, specialists and other workers associated with underground work, in which the use of female labor is permitted, as an exception, is given in paragraph 2 of the notes to this list)
III. Metalworking
Foundry work
3. Cupola maker
4. Casting beater engaged in manual knocking
5. Batch loader in cupolas and furnaces, busy loading the batch manually
6. Casting welder
7. Metal pourer
8. Chopper working with pneumatic tools
9. Melter of metal and alloys
10. Workers engaged in hanging hot castings on a conveyor and servicing and repairing equipment in foundry tunnels
Welding work
11. Gas welder and electric welder of manual welding, working in closed containers (tanks, boilers, etc.), as well as on high-rise communication structures (towers, masts) over 10 meters and steeplejack work
Boiler rooms, cold forming, drawing and pressing works
Work performed by profession:
12. Boilermaker
13. A turner on spinning lathes, doing manual work
14. A chaser working with hand-held pneumatic tools
Forging and pressing and thermal works
Work performed by profession:
15. A bandage worker engaged in hot work
16. A spring operator engaged in hot work when winding springs from wire with a diameter of over 10 mm
17. Roller busy rolling out rings while hot
18. Spring operator at hot metal processing
Metal coating and painting
19. Sealing inside caisson tanks
20. Constant work on lead plating using the hot method (not galvanic)
Mechanical and metalwork-assembly works
Work performed by profession:
21. A pneumatic driller performing work with a pneumatic tool that transmits vibration to the worker’s hands
22. A repairman engaged in: setting up equipment in workshops and departments: hot-rolling, pickling, enameling, insulation using organosilicon varnishes, lead coating in cable production; on hot repairs of selenium and shoeing devices (equipment);
setting up equipment in workshops and departments for the preparation and use of organosilicon varnishes and varnishes containing 40 percent or more of toluene, xylene;
repair of equipment in closed fuel warehouses and oil facilities at thermal power plants, as well as repair of equipment in tunnels and heating chambers in heating networks;
maintenance of water jacket furnaces in the production of non-ferrous metals and alloys;
adjustment and repair of chill molds in a hot state;
directly in the shops: mill, lubricating, forming, foundry, pipe-filling, gleymixing and assembly shops in the production of lead batteries;
repair of technological equipment at engine testing stations, running on leaded gasoline and located in boxes
Working with lead
23. Smelting, casting, rolling, drawing and stamping of lead products, as well as lead coating of cables and soldering of lead batteries
IV. Construction, installation and repair work
24. Hot repair of furnaces and boiler furnaces
25. Uprooting stumps
26. Fastening structures and parts using a construction gun
27. Slab breaking works, dismantling of buildings and structures
28. Punching holes (grooves, niches, etc.) in concrete, reinforced concrete and stone (brick) structures manually and using pneumatic tools
Work performed by profession:
29. An armature worker engaged in manual installation of frames, manual bending machines and scissors
30. Asphalt concrete worker, asphalt concrete worker-cooker, working manually
31. Hydraulic monitor
32. A digger engaged in sinking wells
33. A mason engaged in laying modular solid sand-lime bricks
34. Roofer for steel roofs
35. Caisson operator-operator, caisson operator-miner, caisson operator-fitter, caisson operator-electrician
36. Motor grader operator
37. Asphalt dispenser driver, pit driver
38. Operator of a concrete pumping unit, operator of a mobile bitumen melting unit
39. Bulldozer driver
40. Grader-elevator driver
41. Operator of a mobile asphalt concrete mixer
42. Asphalt concrete paver operator
43. Driver of a single-bucket excavator, operator of a rotary excavator (ditch digger and trencher)
44. Operator of a mobile electric welding unit with an internal combustion engine
45. A mobile power plant operator working at a power plant with an internal combustion engine with a capacity of 150 hp. and more
46. Communications installer/antenna operator working at heights
47. Installer for installation of steel and reinforced concrete structures when working at height and steeplejack work
48. Lead solder (lead solder)
49. Carpenter
50. Plumber repairing the sewer network
51. Pipe laying of industrial reinforced concrete pipes
52. Pipe laying industrial brick pipes
V. Mining operations
Open pit mining and the surface of existing mines and mines under construction, beneficiation, agglomeration, briquetting
Work performed in general mining and capital mining professions:
53. Hole driller
54. Bomber, Master Blaster
55. Miner for fire prevention and extinguishing
56. Delivery of fastening materials to the mine
57. Fastener
58. Blacksmith-driller
59. Drilling rig operator
60. Loader operator
61. Machine operator for drilling full-section mine shafts
62. Excavator operator
63. Tipper engaged in manual rolling and rolling away of trolleys
64. Miner
65. Stemman, busy manually feeding trolleys into cages
66. Cleaner busy cleaning bins
67. Electrical mechanic (mechanic) on duty and for equipment repair, engaged in the maintenance and repair of equipment, mechanisms, water and air lines in mining operations
Work performed in the general professions of beneficiation, agglomeration, briquetting and certain categories of workers:
68. A crusher engaged in crushing hot pitch in the production of alumina
69. A roaster engaged in the process of roasting raw materials and materials in the production of mercury
70. Workers and foremen of processing and crushing and screening factories, mines, mines and metallurgical enterprises engaged in crushing, grinding, grinding and mixing of ferrous, non-ferrous and rare metal ores, fluorspar and coal, which generates dust containing 10 percent or more free silicon dioxide, when working manually
71. Workers employed in lead enrichment shops
72. Workers and craftsmen engaged in the enrichment of niobium (loparite) ores
Construction of subways, tunnels and underground structures
special purpose
Work performed by profession:
73. Mining equipment installer
74. Miner at surface works
Ore mining
Work performed by profession:
75. Placer miner
76. Bit refueler
77. Drager
78. Dredge sailor
79. Dredge driver
80. Rocket launcher operator
Extraction and processing of peat
Work performed by profession:
81. Ditchman
82. Groomer
83. Operator of machines for the extraction and processing of sod peat
84. Operator of machines for preparing peat deposits for operation
85. Peat excavator operator
86. A peat worker engaged in felling trees and laying peat bricks
Processing of brown coals and ozokerite ores
Work performed by profession:
87. Mountain wax production operator
88. Ozokerite and ozokerite products production operator
89. Crusher
90. Briquette press operator
91. Filling machine operator
VI. Geological exploration and topographic-geodetic work
Work performed by profession:
92. Detonator, Master Demolitionist
93. Installer of geodetic signs
94. Electrical mechanic (fitter) on duty and equipment repair, employed in the field
VII. Drilling of the wells
Work performed by profession:
95. Driller for production and exploration drilling of oil and gas wells
96. Derrick erector, rig-welder, derrick-electrician
97. Drilling rig operator
98. Well cementing operator
99. Motorist of a cementing unit, motorist of a cement-sand mixing unit
100. Pipe crimper
101. Assistant driller for production and exploration drilling of oil and gas wells (first)
102. Assistant driller for production and exploration drilling of oil and gas wells (second)
103. Drilling mud maker engaged in manual preparation of mud
104. Drilling rig maintenance mechanic, directly employed on drilling rigs
105. A mechanic repairing drilling equipment
106. Tool joint installer
107. Electrician for drilling rig maintenance
VIII. Mining of oil and gas
108. Well workover driller
109. Driller of a floating drilling unit at sea
110. Operator of a steam mobile dewaxing unit
111. Mobile compressor operator
112. Lift operator
113. Washing unit operator
114. Hydraulic fracturing operator
115. Operator for preparing wells for major and underground repairs
116. Underground well repair operator
117. Well chemical treatment operator
118. Assistant driller for major workover of wells
119. Assistant driller of a floating drilling unit at sea
120. Workers, managers and specialists constantly engaged in underground oil production
121. Mechanic for installation and repair of foundations of offshore drilling rigs and racks
122. Repairman engaged in installation and maintenance of process equipment and repair of oilfield equipment
123. Electrician for the repair and maintenance of electrical equipment, engaged in the maintenance and repair of technological equipment
IX. Ferrous metallurgy
124. Ladle worker working with molten metal
125. Metal heater engaged in work in methodical, chamber furnaces and wells of rolling and pipe production
126. Processor of surface defects of metal, engaged in work with pneumatic tools
Blast furnace production
Work performed by profession:
127. Top blast furnace
128. Blast Furnace Plumber
129. Blast furnace hearth
130. Operator of scale car
131. Skipova
Steelmaking
Work performed by profession:
132. Filling machine operator
133. Mixerova
134. Block stuffer
135. Furnace reduction of iron and annealing of iron powders
136. Melter of deoxidizers
137. Converter steelmaker's helper
138. Helper of the open-hearth furnace steelmaker
139. Helper of a steelmaker at an electroslag remelting installation
140. Electric furnace steelmaker's helper
141. Steel pourer
142. Converter steelmaker
143. Open hearth furnace steelmaker
144. Steelmaker of electroslag remelting plant
145. Electric furnace steelmaker
Rolling production
Work performed by profession:
146. Hot rolling mill roller
147. Pitch cook
148. Hot rolling mill operator's helper
149. Presser-stitcher of rail fastenings
150. Fitter-wire worker engaged in long-rolling production
Pipe production
Work performed by profession:
151. Calibrating mill roller
152. Roller of a hot pipe rolling mill
153. Roller of a furnace pipe welding mill
154. Roller of a cold pipe rolling mill
155. Roller of a pipe forming mill
156. Pipe drawer employed in non-mechanized mills
157. Pipe calibrator on a press
158. Blacksmith on hammers and presses
159. Helper of a rolling mill for hot rolling of pipes
160. Helper of the roller of a cold pipe rolling mill
Ferroalloy production
Work performed by profession and certain categories of workers:
161. Forge of ferroalloy furnaces
162. Melter engaged in melting and granulating molten vanadium pentoxide
163. Ferroalloy smelter
164. Workers engaged in the smelting of silicon alloys in open arc furnaces
165. Workers engaged in the production of metal chromium and chromium-containing alloys by an aluminothermic method
Coke production
166. Work related to direct employment in the production of benzene, its hydrotreating and rectification
Work performed by profession:
167. Barilletchik
168. Door
169. Crusher
170. Luke
171. Scrubber-pumper engaged in servicing the phenol installation in the coking products recovery shop
172. Repairman servicing coke oven batteries
X. Non-ferrous metallurgy
Work performed in general professions:
173. Anode pourer engaged in pouring anode bottom sections in the production of aluminum, silumin and silicon
174. An installer repairing bathtubs, engaged in drilling a recess for a cathode rod in the production of aluminum, silumin and silicon
175. Melter
176. Calcifier
177. Repairman, electrician for repair and maintenance of electrical equipment, employed in the main metallurgical shops
178. Sinterer
179. A charger working at furnaces in the production of tin
Production of non-ferrous and rare metals, production of powders
from non-ferrous metals
180. Work performed by workers and craftsmen employed in workshops (departments and areas) for the production of titanium tetrachloride (tetrachloride)
181. Work performed by workers and craftsmen employed in the loparite concentrate chlorination shops
182. Work performed by workers and craftsmen employed in workshops (departments and areas) for the recovery of tetrachloride and metal separation in the production of titanium metal
183. Work performed by workers and craftsmen employed in departments (areas) of chlorination and rectification of titanium raw materials (slag)
184. Work performed by workers employed in the department of slag processing by sublimation at a fuming installation in tin production
185. Work performed by workers employed in smelting shops, as well as in the processing of cinders in the production of mercury
Work performed by profession:
186. Anode operator in aluminum production
187. Titanium sponge knocker
188. Metal pourer
189. Cathode
190. Converter
191. Capacitor
192. Installer of reaction apparatuses, engaged in the installation and dismantling of baths and furnaces, in the repair and restoration of reaction apparatuses
193. Mercury chopper
194. Pechevoy in the production of zinc dust
195. Pechevoy on Waelz kilns
196. Pechevoy on the recovery and distillation of titanium and rare metals
197. Furnace for the recovery of nickel powder
198. Furnace for processing titanium-containing and rare earth materials
199. Electrolyte bath sludge operator, engaged in manual cleaning of baths
200. Molten salt electrolyser
Pressure processing of non-ferrous metals
201. Work performed by a hot metal roller engaged in rolling non-ferrous metals and their alloys
Aluminum production by electrolytic method
202. Work performed by workers and craftsmen
Alumina production
203. Work performed by a loader operator engaged in repair work in hard-to-reach places of pneumatic and hydraulic loaders
XI. Repair of power plant equipment and networks
Work performed by profession:
204. Electrician for repair of overhead power lines, engaged in steeplejack work repairing high-voltage power lines
205. Electrician for the repair and installation of cable lines, engaged in the repair of cable glands with lead litharge and soldering of lead cable couplings and sheaths
XII. Abrasives production
Work performed by profession:
206. Balancer-pouring abrasive wheels, busy pouring abrasive products with lead
207. Bulldozer operator engaged in hot dismantling of resistance furnaces in the production of abrasives
208. Melter of abrasive materials
209. Podina worker employed in the corundum workshop
210. Resistance furnace dismantler employed in the silicon carbide production shop
XIII. Electrical production
Work performed in general professions:
211. Mercury distiller
212. Mercury rectifier molder performing work with open mercury
Electrocoal production
213. Work performed by workers on pitch smelting
Cable production
Work performed by profession:
214. Lead or aluminum cable crimper engaged in hot lead crimping
215. Remover of sheaths from cable products, engaged in removing only lead sheaths
Production of chemical power sources
Work performed by profession:
216. Foundry worker of lead alloy products
217. Dry mass mixer (for lead batteries)
218. Melter of lead alloys
219. Battery plate cutter engaged in stamping and separating formed lead plates
XIV. Radio engineering and electronic production
Work performed by profession:
220. Tester of parts and devices engaged in testing devices in thermobaric chambers at temperatures of +28 ° C and above and -60 ° C and below, provided that they are directly in them
221. Caster of magnets on crystallizer furnaces
222. Melter of shopalloy and bismuth
XV. Aircraft production and repair
Work performed by profession:
223. A mechanic for repairing aircraft engines and a mechanic for repairing units engaged in the repair of engines and units running on leaded gasoline
XVI. Shipbuilding and ship repair
Work performed by profession:
224. Reinforcement worker of reinforced concrete ships, engaged in work on vibrating tables, vibrating platforms, cassette installations and with manual vibrators
225. Ship bender engaged in hot bending
226. Boilermaker
227. Painter, ship insulator, engaged in painting work in tanks, second bottom areas, warm boxes and other hard-to-reach areas of ships, as well as in work on cleaning old paint in these areas of ships
228. Coppermaker for the manufacture of ship products, engaged in hot work
229. Ship carpenter working in closed compartments of ships
230. Workers of the commissioning team at mooring, factory and state tests
231. A ship's hewer engaged in work with hand-held pneumatic tools
232. An assembler of metal ship hulls, engaged in sectional, block and slipway assembly of surface ships, constantly combining his work with electric tack, gas cutting and metal processing with hand-held pneumatic tools, as well as ship repair
233. Mechanical mechanic for testing installations and equipment, engaged in adjusting and testing marine diesel engines in enclosed spaces and inside ships
234. Ship fitter, engaged in installation inside ships during repairs
235. Ship repairman engaged in work inside ships
236. Ship hull repairman
237. Ship rigger
238. Ship's pipefitter
XVII. Chemical production
Work performed in chemical production by profession and certain categories of workers:
239. Melting operator engaged in smelting and refining pitch
240. Steamer engaged in tearing and steaming rubber
Production of inorganic products
Calcium carbide production
241. Workers, shift managers and specialists employed in furnaces and manual crushing of carbide
Phosgene production
242. Workers, shift managers and specialists engaged in technological stages
Production of mercury and its compounds
243. Workers, shift managers and specialists engaged in technological stages, except for remotely controlled production
Production of yellow phosphorus
244. Workers, shift managers and specialists directly involved in the maintenance of mine slot furnaces, roasting and sintering furnaces, fines granulation plants, in phosphorus electric sublimation departments, in the filling of phosphorus tanks, in the maintenance of phosphorus storage tanks, phosphorus sludge, sludge distillation and in the processing of fire-liquids slag
Production of phosphorus trichloride and phosphorus pentasulphide
245. Workers, shift managers and specialists engaged in technological stages
Production of chlorine using the mercury method
246. Workers engaged in technological stages
Production of liquid chlorine and chlorine dioxide
247. Workers engaged in technological stages
Carbon disulfide production
248. Workers, shift managers and specialists employed in the retort and condensation departments
Work with fluorine, hydrogen fluoride and fluorides
249. Workers, managers and specialists (except for work performed in laboratories using hydrofluoric acid and fluorides)
Production of arsenic and arsenic compounds
250. Workers, shift managers and specialists engaged in technological stages
Production of silicon tetrachloride
251. Workers, shift managers and specialists engaged in technological stages
Production of technical iodine
252. Workers engaged in squeezing iodine
Production of organic products
Production of benzatron and its chlorine and bromine derivatives, vilontron
253. Workers, shift managers and specialists engaged in technological stages
Production of aniline, paranitroaniline, aniline salts and fluxes
254. Workers, shift managers and specialists engaged in technological stages
Production of benzidine and its analogues
255. Workers, managers, specialists and other employees employed directly in production and at the dissolution station of these products
Production of carbon tetrachloride, golovax, rematol, sovol
256. Workers, shift managers and specialists engaged in technological stages
Production of chloropicrin
257. Workers, shift managers and specialists engaged in technological stages
Production of catalysts containing arsenic
258. Workers, shift managers and specialists engaged in technological stages
Production of ziram, mercury- and arsenic-containing pesticides
259. Workers, shift managers and specialists engaged in technological stages
Chloroprene production
260. Workers, shift managers and specialists engaged in technological stages
Production of chloroprene rubber and latex
261. Workers involved in the technological stages of polymerization and product separation
Production of ethyl liquid
262. Workers, managers and specialists engaged in technological stages
Production of benzene, toluene, xylene
263. Workers, shift managers and specialists engaged in technological stages
Paint and varnish production
Production of lead litharge and red lead, lead crowns,
white, lead green and jurmedite
264. Workers, shift managers and specialists engaged in technological stages
Production of chemical fibers and threads
265. Regeneration operator engaged in the regeneration of carbon disulfide
Production of fiberglass-based products
synthetic resins (phenol-formaldehyde, epoxy,
unsaturated polyester resins)
266. Operators engaged in contact molding of large-sized products with an area of 1.5 sq.m or more
Production of medicines, medical, biological
drugs and materials
Antibiotic production
267. Filtration operator engaged in manual disassembly and assembly of filter presses with frame sizes greater than 500 mm
Extracting morphine from raw opium
268. Filtration operator engaged in manual disassembly and assembly of filter presses with frame sizes greater than 500 mm
Androgen production
269. Operator for the production of synthetic hormones, engaged in the production of testosterone preparations and its derivatives
XVIII. Production and processing of rubber compounds
Work performed by profession:
270. Vulcanizer engaged in loading and unloading products in boilers over 6 meters long, vulcanizing propeller shafts
271. Rubber mixer operator
272. Workers employed in the departments: cold vulcanization, production of radol and facts
273. Repairer of rubber products, engaged in the manufacture and repair of large rubber parts and products, vulcanization of reinforced parts (large tires, rubber fuel tanks, reservoirs, conveyor belts, etc.)
Production, retreading and repair of tires
274. Work performed by a vulcanizer, tire collector (heavy duty)
XIX. Oil, gas, shale and coal processing, production
synthetic petroleum products, petroleum oils and lubricants
Work performed by profession and certain categories of workers:
275. Coke cleaner
276. Coke unloader
277. Workers, shift managers and specialists employed in gasoline leaded process plants
278. Workers employed in extraction shops and departments of aromatic hydrocarbons production
279. Workers engaged in the preparation of arsenic solutions for the purification of sulfur-containing petroleum gas
XX. Logging and rafting
Logging work
280. Loading and unloading of round timber (except for pulpwood, mine stand and firewood up to 2 meters long)
281. Stacking of round timber (except for pulpwood, mine stand and firewood up to 2 meters long)
Work performed by profession:
282. Forest feller
283. A lumberjack engaged in felling, bucking logs and hilling logs, chopping firewood, harvesting and cutting tar resin, as well as harvesting wood using hand tools
284. Timber piler, engaged in the creation of inter-operational and seasonal reserves of logs and trees, loading trees, logs and round timber (with the exception of pulpwood, mine stands and firewood up to 2 meters long) onto timber rolling stock and unloading them, performing the work manually
285. Chokerer
Timber rafting
Work performed by profession:
286. Raftsman
287. Rigger engaged in loading and unloading rigging
288. Raft shaper
XXI. Production of pulp, paper, cardboard and products made from them
Work performed by profession:
289. Operator for preparing chemical solutions, working on dissolving chlorine
290. Impregnation operator engaged in the production of anti-corrosion and inhibited paper
291. Cooker of fibrous raw materials
292. Pulp cook
293. Woodpair
294. Pyrite crusher
295. Loader of balances into defibrators
296. Loader of pyrites, sulfur furnaces and turmas
297. Sulphate loader
298. Acid
299. Mixer
300. Acid tank liner
301. Fiber sawmill
302. Impregnator of paper and paper products, engaged in fiber impregnation
303. Sulfurous acid regenerator
304. Repairman, lubricator, cleaner of production and office premises, electrician for repair and maintenance of electrical equipment, employed in the production of sulfite cellulose and sulfurous acid
305. Sodaman
306. Paper (board) machine dryer, employed on high-speed paper and board machines operating at speeds of 400 or more meters per minute
307. Chlorine man
XXII. Cement production
308. Work performed by workers cleaning sludge pools and talkers
XXIII. Stone processing and production of stone foundry products
Work performed by profession:
309. Stone casting pourer
310. Stonemaker
311. Stonecutter
312. Mill operator busy breaking diabase crushed stone into powder
313. Stone processing equipment operator
314. Stone sawyer
315. Stone miller
XXIV. Production of reinforced concrete and concrete products and structures
316. Work as a carver of concrete and reinforced concrete products
XXV. Production of thermal insulation materials
Work performed by profession:
317. Bitumen worker
318. Cupola maker
XXVI. Production of soft roofing and waterproofing materials
319. Work performed by the digester loader
XXVII. Production of glass and glass products
Work performed by profession:
320. Quartz blower (except for those engaged in the manufacture of products with a diameter of up to 100 mm and a wall thickness of up to 3 mm)
321. Quartz smelter
322. Mirror dyer working with mercury
323. Batch compiler engaged in manual work using red lead
324. Halmovschik
XXVIII. Textile and light industry
Work performed in general textile manufacturing professions:
325. Sizing equipment operator engaged in non-mechanized lifting and removal of rollers
326. Plumber cleaning sewer trenches and wells
Primary processing of cotton
327. Work as a press operator
Hemp and jute production
328. Work as a fiber preparer engaged in breaking bales of jute
Wool production
Work performed by profession:
329. Washer of technical cloths
330. Assistant foreman employed in a weaving workshop in the production of cloth
Fulling and felt production
Work performed by profession:
331. Fuller engaged in the production of dense felts
332. Shoe fitter engaged in manual work
333. Shoe remover from lasts, engaged in removing felted shoes by hand
Tanning and leather production
335. Transportation, unloading and loading of large leather raw materials and semi-finished products manually in the soaking and ash shops of leather factories
Work performed by profession:
336. A skinner engaged in turning large leathers on blocks by hand, in the fleshing and breaking of large leather raw materials
337. Leather roller engaged in rolling large and hard leathers on rollers
338. Leather cutter
339. Sorter of products, semi-finished products and materials, engaged in sorting large leather raw materials
340. Cleaner of products, semi-finished products and materials, engaged in cleaning large leathers and large leather raw materials on blocks by hand
Production of leather shoes
341. Work as a molder of parts and products, working on Anklepf type machines
XXIX. Food industry
342. Baling waste from corrugated packaging production
Work performed in general food production professions:
343. Diffusion operator servicing periodic diffusers when loading manually
344. Ice harvester, engaged in collecting ice in reservoirs and laying it in piles
345. Bone charcoal maker
346. Cleaning machine operator engaged in manual dismantling of separators
Production of meat products
Work performed by profession:
347. Livestock fighter engaged in operations of stunning, hooking, bleeding of large and small cattle and pigs; evisceration, manual removal of cattle hides; sawing up carcasses; scalds and scorches of pork carcasses and heads; horizontal processing of cattle carcasses
348. Skin peeler
349. Skin processor
Fish extraction and processing
350. All types of work on fishing, search and receiving and transport sea vessels, with the exception of sea floating crab canneries, fish processing bases, large freezing fishing trawlers and refrigerated sea vessels, where women’s labor is allowed in all jobs, excluding jobs (professions, positions) , specified in sections XXXII "Maritime transport" and XXXIII "River transport" of this list
351. Manually turning barrels of fish
Work performed by profession:
352. Loader-unloader of food products, engaged in loading grates with canned food into autoclaves manually
353. Processor of sea animals, engaged in fleshing the skins of sea animals
354. A fish processor engaged in pouring and unloading fish manually from vats, chests, ships, slots and other navigable containers; mixing fish in salting vats by hand
355. Presser-squeezer of food products, engaged in pressing (squeezing) fish in barrels by hand
356. Receiver of watercraft
357. Coastal fisherman engaged in hand-pulling cast nets, ice fishing on cast nets, set nets and vents
Bakery production
358. Work performed by a dough handler working on dough mixing machines with rolling bowls with a capacity of over 330 liters when moving them manually
Tobacco-shag and fermentation production
359. Work performed by an auxiliary worker engaged in transporting bales of tobacco
Perfume and cosmetic production
360. Work performed by a worker engaged in grinding amidochloric mercury
Extraction and production of table salt
Work performed by profession:
361. Salt piler in swimming pools
362. Pool preparer
363. Track worker on the lake
XXX. Rail transport and metro
Work performed by profession and certain categories of workers:
364. Battery worker repairing lead batteries
365. A handcar driver and his assistant working on broad gauge railway lines
366. Freight train conductor
367. Fireman of steam locomotives in the depot
368. Diesel train driver and his assistant
369. A locomotive driver and his assistant working on broad gauge railway lines
370. Locomotive driver and his assistant
371. Diesel locomotive driver and his assistant
372. Traction unit operator and his assistant
373. Electric locomotive driver and his assistant
374. Electric train driver and his assistant
375. Track fitter (if the established norms of maximum permissible loads for women when lifting and moving heavy objects manually are exceeded)
376. Porter engaged in moving luggage and hand luggage
377. Inspector-repairer of wagons
378. Pipe puncher-blower
379. Conductor for escorting cargo and special wagons, engaged in escorting cargo on open rolling stock
380. Locomotive boiler cleaner
381. Impregnator of lumber and wood products, engaged in impregnation using oil antiseptics
382. Car speed controller
383. A mechanic for the repair of rolling stock, performing the following work:
for repairing fittings on steam locomotives when washing them warmly; in fire and smoke boxes;
for blowing the bottom and gutters of electric rolling stock and diesel locomotives with electric transmission;
for disassembling, repairing and assembling drainage devices and safety valves, for inspecting and filling valves for drainage devices in tanks containing petroleum products and chemical products
384. Train compiler, assistant train compiler
385. Electrician of a contact network engaged in work at height on electrified railways
386. Workers loading asbestos waste, constantly working in the ballast quarry of asbestos waste
XXXI. Automobile transport
Work performed by profession:
387. A car driver working on a bus with more than 14 seats (except for those employed in intra-factory, intra-city, suburban transportation and transportation in rural areas within one day shift, provided that he is not involved in the maintenance and repair of the bus)
388. A car driver working on a vehicle with a carrying capacity of over 2.5 tons (except for those employed in intra-factory, intra-city, suburban transportation and transportation in rural areas within one day shift, provided that they are not involved in the maintenance and repair of the truck)
389. Automobile repairman manually washing engine parts of a car running on leaded gasoline.
390. A car repair mechanic engaged in running-in an engine using leaded gasoline.
391. Fuel equipment mechanic employed in motor vehicles repairing fuel equipment for carburetor engines running on leaded gasoline.
XXXII. Sea transport
392. Coastal boatswain, coastal sailor, senior coastal sailor (with the exception of those working at passenger berths of local and suburban lines)
393. Ship fireman and boiler operator engaged in servicing boilers on ships and cranes, regardless of the type of fuel burned in the boilers
394. Cranmaster and his assistant
395. Crane operator (crane operator) working on a floating crane and his assistant
396. Engine command staff (mechanics, electromechanics and others) and engine crew (machinists, mechanics, electricians, turners and mechanics of all types and others) of ships of all types of fleet
397. Deck crew (boatswain, skipper, mate and sailors of all types) of ships of all types of fleet, as well as floating cleaning stations, docks, floating reloaders of grain, cement, coal and other dust-generating cargo
398. Workers of complex teams and loaders engaged in loading and unloading operations in ports and piers
399. Crew members of all types of fleet, combining work in two positions of deck and engine personnel
XXXIII. River transport
Work performed by profession and position:
400. Loaders, dockers-mechanists (except for dockers-mechanists who constantly work as crane operators, drivers of intra-port transport and workers servicing machines and continuous mechanisms for cargo processing, with the exception of substances belonging to hazard classes 1 and 2)
401. Ship stoker employed on ships operating on solid fuel
402. Sailors of all types of passenger and cargo-passenger ships (except for hydrofoil and planing ships, as well as ships operating on intracity and suburban lines), dredgers, dredgers and mixed river-sea navigation vessels
403. Crane operator (crane operator) working on a floating crane
404. Engine crew of ships of all types of fleet, as well as crew members of ships of all types of fleet, combining work in two positions of deck and engine personnel
XXXIV. civil Aviation
Work performed by profession and certain categories of workers:
405. Aviation mechanic (technician) for airframe and engines, aviation mechanic (technician) for instruments and electrical equipment, aviation mechanic (technician) for radio equipment, aviation technician (mechanic) for parachute and rescue equipment, aviation technician for fuels and lubricants , engineer directly involved in the maintenance of aircraft (helicopters)
406. Porter engaged in moving baggage and hand luggage at airports
407. Gas station operator engaged in refueling aircraft with leaded gasoline, as well as refueling special vehicles with leaded gasoline
408. Workers engaged in cleaning and repairing the inside of gas turbine aircraft fuel tanks
409. Workers engaged in the preparation of bitumen and repair of runways and taxiways (filling joints) at airfields
XXXV. Connection
410. Operational and technical maintenance of radio equipment and communication equipment on high-rise buildings (towers, masts) over 10 m high, not equipped with elevators
XXXVI. Printing production
Work related to the use of lead alloys
411. Work on casting operations and finishing of the stereotype
Work performed by profession:
412. Printing equipment adjuster, employed in the areas of casting stereotypes, type, typesetting and whitespace materials
413. Caster
414. Stereotyper
Gravure printing workshops
415. Work in the gravure printing department (except for acceptance and packaging of finished products)
416. Work performed by an intaglio plate etcher
XXXVII. Production of musical instruments
417. Peeling and cleaning of cast iron frames of pianos and grand pianos using abrasive wheels
418. Work performed by a wind instrument parts maker engaged in the manufacture of parts for brass instruments
XXXVIII. Agriculture
419. Performing operations in crop production, livestock farming, poultry farming and fur farming using pesticides, pesticides and disinfectants (under the age of 35)
420. Maintenance of stud bulls, stud stallions, boars
421. Loading and unloading of animal corpses, confiscated goods and pathological material
422. Work in wells, slurry tanks and tanks, silos and haylage towers
423. Work as tractor drivers in agricultural production
424. Working as truck drivers
425. Removing skins from the corpses of cattle, horses and cutting up carcasses
426. Transportation, loading and unloading of pesticides
427. Laying drainage pipes manually
XXXIX. Work performed in various sectors of the economy
428. Cleaning, scraping and painting work in ship and railway tanks, ship liquid fuel tanks and oil tankers, cofferdams, fore- and afterpeaks, chain boxes, double-bottom and double-hull spaces and other hard-to-reach places
429. Painting work using lead white, lead sulfate or other compositions containing these dyes
430. Installation, repair and maintenance of contact networks, as well as overhead power lines when working at a height of over 10 m
431. Direct fire extinguishing
432. Maintenance of floating craft, dredgers with ship rigging work
433. Cleaning of containers (reservoirs, measuring tanks, tanks, barges, etc.) from sour oil, products of its processing and sulfur-containing petroleum gas
434. Work with metallic mercury in open form (except for workers employed in installations and semi-automatic machines, where effective air exchange in the workplace is ensured)
435. Mixing gasoline with ethyl liquid
436. Cleaning mercury rectifiers
Work performed by profession:
437. Antenna-mast operator
438. Bitumen cooker
439. Snowmobile driver
440. Diver
441. Gas rescuer
442. Mercury dispenser engaged in dosing open mercury manually
443. Wood splitter engaged in manual work
444. Boilermaker repairing hot boilers
445. Boiler cleaner
446. A painter engaged in preparing lead paints by hand
447. Painter engaged in painting inside containers using paints and varnishes containing lead, aromatic and chlorinated hydrocarbons, as well as painting large-sized products in closed chambers with a spray gun using the same paints and varnishes
448. Crane operator (crane operator) busy working at sea
449. A driver (stoker) of a boiler house engaged in servicing steam and water-heating boilers when loading manually with the consumption per change of solid mineral and peat fuel per driver (stoker) exceeding the established norms of maximum permissible loads for women when lifting and moving heavy objects manually
450. Paratrooper (paratrooper-firefighter)
451. Workers of the engine crew of floating cranes
452. Grinder engaged in grinding pitch
453. Repairman of artificial structures
454. Emergency repair mechanic engaged in cleaning the sewerage network
455. Rigger engaged in installation and dismantling of equipment
456. A cleaner engaged in cleaning pipes, furnaces and flues
Notes:
1. An employer may decide to employ women in jobs (professions, positions) included in this list, subject to the creation of safe working conditions, confirmed by the results of certification of workplaces, with a positive conclusion of the state examination of working conditions and the state sanitary and epidemiological inspection service of a constituent entity of the Russian Federation.
2. List of positions of managers, specialists and other workers related to underground work, in which, as an exception, the use of female labor is permitted:
general director, director, chief, technical director, manager, chief engineer of mines and mines for the extraction of coal, ore and non-metallic minerals by underground methods, for the construction of subways, tunnels, mine construction and mine tunneling departments, construction and construction and installation departments and construction and other underground structures, their deputies and assistants; chief, chief engineer of mining workshops and sections, their deputies and assistants; senior engineer, engineer, technician, other managers, specialists and employees who do not perform physical work; engineer, technician, laboratory assistant, other specialists and employees who do not perform physical work and do not permanently stay underground; chief surveyor, senior surveyor, mine surveyor, mine surveyor; chief geologist, chief hydrogeologist, chief hydrologist, mine, mine geologist, geologist, mine, mine hydrogeologist, hydrogeologist, hydrologist;
workers servicing stationary mechanisms that have automatic start and stop, and who do not perform other work related to physical activity; workers undergoing training and admitted to internships in underground parts of organizations;
employees of scientific and educational institutions, design and engineering organizations;
doctor, paramedical and junior medical personnel, bartender and other workers involved in sanitary and consumer services.
GOVERNMENT OF THE RUSSIAN FEDERATION
RESOLUTION
ABOUT MAKING CHANGES
RULES FOR PROVISION AND DISTRIBUTION OF SUBSIDIES
FROM THE FEDERAL BUDGET TO THE BUDGETS OF THE RUSSIAN ENTITIES
FEDERATION FOR PROVIDING RESIDENTIAL PREMISES FOR ORPHANS
AND CHILDREN WITHOUT PARENTAL CARE, INDIVIDUALS
OF THEIR NUMBER UNDER CONTRACTS FOR HIRE OF SPECIALIZED RESIDENTIALS
PREMISES AND RECOGNITION OF SEPARATE PROVISIONS
SOME ACTS OF THE GOVERNMENT OF THE RUSSIAN FEDERATION
The Government of the Russian Federation decides:
1. Approve the attached changes that are being made to the Rules for the provision and distribution of subsidies from the federal budget to the budgets of constituent entities of the Russian Federation for the provision of residential premises to orphans and children left without parental care, persons from among them under contracts for the rental of specialized residential premises, approved by Government Resolution Russian Federation dated December 31, 2009 N "On approval of the Rules for the provision and distribution of subsidies from the federal budget to the budgets of constituent entities of the Russian Federation for the provision of residential premises to orphans and children without parental care, persons from among them under rental agreements for specialized residential premises" (Collected Legislation of the Russian Federation, 2010, N 3, Art. 327; 2011, N 3, Art. 545; N 31, Art. 4764; 2012, N 3, Art. 447; N 32, Art. 4566; N 53, Article 7945; 2014, No. 12, Article 1281; 2015, No. 3, Article 575).
2. To recognize as invalid certain provisions of acts of the Government of the Russian Federation according to the list according to the appendix.
Chairman of the Government
Russian Federation
D.MEDVEDEV
Approved
Government resolution
Russian Federation
CHANGES,
WHICH ARE INCLUDED IN THE RULES OF PROVISION AND DISTRIBUTION
SUBSIDIES FROM THE FEDERAL BUDGET TO THE BUDGETS OF ENTITIES
OF THE RUSSIAN FEDERATION FOR THE PROVISION OF RESIDENTIAL PREMISES
ORPHANS AND CHILDREN WITHOUT PARENTAL CARE,
TO PERSONS FROM THEIR NUMBER UNDER CONTRACTS OF EMPLOYMENT OF SPECIALIZED
RESIDENTIAL PREMISES
1. In paragraph 3:
a) in subparagraph “a”, replace the words “Minimum volume” with the word “Volume”;
b) add subparagraph "g" with the following content:
"g) return by a constituent entity of the Russian Federation of funds to the federal budget in accordance with clause 16 of the Rules for the formation, provision and distribution of subsidies from the federal budget to the budgets of constituent entities of the Russian Federation, approved by Decree of the Government of the Russian Federation of September 30, 2014 No. "On the formation, provision and distribution subsidies from the federal budget to the budgets of the constituent entities of the Russian Federation (hereinafter referred to as the Rules for the formation, provision and distribution of subsidies).
2. Clause 3(2) shall be stated as follows:
"3(2). The volume of budgetary allocations of the budget of a constituent entity of the Russian Federation for financial support of the expenditure obligations of the constituent entity of the Russian Federation, for the co-financing of which subsidies are provided, is determined based on the maximum level of co-financing of the expenditure obligation of the constituent entity of the Russian Federation from the federal budget.
The maximum level of co-financing of the expenditure obligation of a constituent entity of the Russian Federation from the federal budget in 2017 is given in accordance with the appendix.
The maximum level of co-financing of the expenditure obligation of a constituent entity of the Russian Federation from the federal budget starting from 2018 is determined in accordance with paragraph 13 of the Rules for the formation, provision and distribution of subsidies."
3. In paragraph eight of clause 6, delete the word “next”.
4. In paragraph 8:
a) paragraph eight should be stated as follows:
"where Bi is the volume of budgetary allocations of the budget of a constituent entity of the Russian Federation for the fulfillment of expenditure obligations of a constituent entity of the Russian Federation, determined in accordance with paragraph 3(2) of these Rules;";
b) add the following paragraph:
"Ci is the amount of the subsidy provided from the federal budget to the budget of the i-th subject of the Russian Federation.".
5. In paragraph 8(1):
a) in paragraph one, replace the words “in the form approved by the Ministry of Education and Science of the Russian Federation” with the words “in accordance with the standard form approved by the Ministry of Finance of the Russian Federation”;
b) subparagraph “a” should be supplemented with the words “as well as the volume of budgetary allocations of the budget of a constituent entity of the Russian Federation for the implementation of relevant expenditure obligations”;
c) subparagraph “d” should be stated as follows:
"d) the value of the performance indicator for the use of the subsidy, which must correspond to the values of target indicators and indicators of state programs of the Russian Federation, and the obligation of the subject of the Russian Federation to achieve it;";
d) subparagraph "g" shall be declared invalid;
d) add subparagraphs “i” and “j” with the following content:
"i) liability of the parties for violation of the terms of the agreement;
j) the condition for the entry into force of the agreement."
6. Clause 8(3) shall be stated as follows:
"8(3). Amendments to the agreement that provide for a deterioration in the value of the performance indicator for the use of the subsidy are not allowed, except in cases where fulfillment of the conditions for the provision of the subsidy turned out to be impossible due to force majeure circumstances, changes in the values of target indicators and indicators of state programs of the Russian Federation, and also in case of a significant (more than 20 percent) reduction in the amount of the subsidy."
8. Subparagraph “b” of paragraph 9 should be stated as follows:
“b) compliance, when making expenses at the expense of a subsidy, with the maximum level of co-financing of the expenditure obligation of a constituent entity of the Russian Federation from the federal budget established in accordance with paragraph 3(2) of these Rules.”
9. Clause 9(1) shall be stated as follows:
"9(1). The transfer of the subsidy is carried out in the prescribed manner on the basis of the application provided for in paragraph 7(1) of these Rules to accounts opened by the territorial bodies of the Federal Treasury in the institutions of the Central Bank of the Russian Federation to record transactions with funds from the budgets of the constituent entities of the Russian Federation." .
10. Clause 10 is declared invalid.
11. In paragraph 11, the words “clauses 7(1), 8(2) and 10” shall be replaced with the words “clauses 7(1) and 8(2)”.
12. Clause 12 shall be stated as follows:
"12. If the volume of budgetary allocations provided for in the budget of a constituent entity of the Russian Federation for financial support of the expenditure obligations of the constituent entities of the Russian Federation, for the co-financing of which subsidies are provided, does not provide the maximum level of co-financing of the expenditure obligation of the subject determined in accordance with paragraph 3(2) of these Rules Russian Federation from the federal budget, the amount of subsidies provided to the budget of a constituent entity of the Russian Federation is subject to reduction in order to ensure an appropriate level of co-financing."
13. Clause 13 should be stated as follows:
"13. If a subject of the Russian Federation, as of December 31 of the year of granting the subsidy, committed violations of the obligations stipulated by the agreement in accordance with subparagraph "d" of paragraph 8(1) of these Rules, and before the first date of submission of reports on the achievement of indicator values the effectiveness of the use of the subsidy in accordance with the agreement in the year following the year of provision of the subsidy, these violations have not been eliminated, the amount of funds to be returned from the budget of the constituent entity of the Russian Federation to the federal budget, and the period for returning these funds are determined in accordance with paragraph 16 of the Rules for the formation, provision and distribution of subsidies.
The grounds for exemption of subjects of the Russian Federation from the application of liability measures provided for in this paragraph are the documented occurrence of force majeure circumstances preventing the fulfillment of relevant obligations."
14. In paragraph 14:
a) the words “clauses 12 - 13(1)” shall be replaced with the words “clauses 12 and 13(1)”;
b) add the words “in the manner established by the budget legislation of the Russian Federation.”
15. Clause 14(2) shall be declared repealed.
16. Add the following annex:
"Application
to the Rules for provision
and distribution of subsidies
from the federal budget to budgets
subjects of the Russian Federation
for the provision of residential premises
orphans and children left behind
without parental care, persons
from among them under contracts
hiring specialized
residential premises
LIMIT LEVEL
CO-FINANCING THE EXPENDITURE LIABILITY OF THE ENTITY
OF THE RUSSIAN FEDERATION DUE TO SUBSIDIES FROM THE FEDERAL
BUDGET IN 2017 TO THE BUDGET OF THE SUBJECT OF THE RUSSIAN FEDERATION
FOR PROVIDING RESIDENTIAL PREMISES FOR ORPHANS AND CHILDREN,
THOSE LEFT WITHOUT PARENTAL CARE AND PERSONS FROM THEIR CARE
UNDER LEASE CONTRACTS FOR SPECIALIZED RESIDENTIAL PREMISES
Name of the subject of the Russian Federation | Co-financing level (percentage) |
Republic of Adygea | |
Altai Republic | |
Republic of Bashkortostan | |
The Republic of Buryatia | |
The Republic of Dagestan | |
The Republic of Ingushetia | |
Kabardino-Balkarian Republic | |
Republic of Kalmykia | |
Karachay-Cherkess Republic | |
Republic of Karelia | |
Komi Republic | |
Republic of Crimea | |
Mari El Republic | |
The Republic of Mordovia | |
The Republic of Sakha (Yakutia) | |
Republic of North Ossetia - Alania | |
Republic of Tatarstan | |
Tyva Republic | |
Udmurt republic | |
The Republic of Khakassia | |
Chechen Republic | |
Chuvash Republic | |
Altai region | |
Transbaikal region | |
Kamchatka Krai | |
Krasnodar region | |
Krasnoyarsk region | |
Perm region | |
Primorsky Krai | |
Stavropol region | |
Khabarovsk region | |
Amur region | |
Arhangelsk region | |
Astrakhan region | |
Belgorod region | |
Bryansk region | |
Vladimir region | |
Volgograd region | |
Vologda Region | |
Voronezh region | |
Ivanovo region | |
Irkutsk region | |
Kaliningrad region | |
Kaluga region | |
Kemerovo region | |
Kirov region | |
Kostroma region | |
Kurgan region | |
Leningrad region | |
Lipetsk region | |
Magadan Region | |
Moscow region | |
Murmansk region | |
Nizhny Novgorod Region | |
Novgorod region | |
Novosibirsk region | |
Omsk region | |
Orenburg region | |
Oryol Region | |
Penza region | |
Pskov region | |
Rostov region | |
Ryazan Oblast | |
Samara Region | |
Saratov region | |
Sakhalin region | |
| Tver region Tyumen region Yaroslavl region City of Sevastopol Khanty-Mansiysk Autonomous Okrug - Yugra SCROLL OF SEPARATE PROVISIONS OF GOVERNMENT ACTS RUSSIAN FEDERATION 1. Clauses 6 and 12 of the changes that are being made to the Rules for the provision and distribution of subsidies from the federal budget to the budgets of constituent entities of the Russian Federation for the provision of residential premises for orphans, children left without parental care, as well as children under guardianship (trusteeship), do not having assigned residential premises, approved by Decree of the Government of the Russian Federation dated July 22, 2011 N “On amendments to the Rules for the provision and distribution of subsidies from the federal budget to the budgets of constituent entities of the Russian Federation for the provision of residential premises for orphans, children without parental care, and also children under guardianship (trusteeship) who do not have assigned living quarters" (Collected Legislation of the Russian Federation, 2011, No. 31, Art. 4764). 2. Clause 5 of the changes that are being made to the Rules for the provision and distribution of subsidies from the federal budget to the budgets of constituent entities of the Russian Federation for the provision of residential premises for orphans, children without parental care, as well as children under guardianship (trusteeship) who do not have an assigned residential premises, approved by Decree of the Government of the Russian Federation dated July 30, 2012 N "On amendments to the Rules for the provision and distribution of subsidies from the federal budget to the budgets of constituent entities of the Russian Federation for the provision of residential premises for orphans, children without parental care, as well as children who are under guardianship (trusteeship) and do not have assigned living quarters" (Collected Legislation of the Russian Federation, 2012, No. 32, Art. 4566), in terms of subparagraph "g" of paragraph 8(1). 3. Subparagraph "x" of paragraph 2 of the amendments that are being made to the Decree of the Government of the Russian Federation of December 31, 2009 N, approved by the Decree of the Government of the Russian Federation of December 24, 2012 N "On amendments to the Decree of the Government of the Russian Federation of December 31, 2009 No. 1203" (Collected Legislation of the Russian Federation, 2012, No. 53, Art. 7945). 4. Subparagraph "c" (in terms of subparagraph "g" of paragraph 8(1) and paragraph 10) and subparagraph "d" of paragraph 1 of the Decree of the Government of the Russian Federation of March 13, 2014 N "On amendments to the Rules for the provision and distribution of subsidies from the federal budget to the budgets of the constituent entities of the Russian Federation for the provision of residential premises to orphans and children without parental care, persons from among them under contracts for the rental of specialized residential premises" (Collected Legislation of the Russian Federation, 2014, No. 12, Art. 1281). 5. Subparagraph "e" of paragraph 9 (in terms of subparagraph "g" of paragraph 8(1)) and paragraph 13 of the changes that are being made to the Rules for the provision and distribution of subsidies from the federal budget to the budgets of constituent entities of the Russian Federation for the provision of residential premises to orphans and children , left without parental care, persons from among them under contracts for the rental of specialized residential premises, approved by Decree of the Government of the Russian Federation of December 26, 2014 N “On amendments to the Rules for the provision and distribution of subsidies from the federal budget to the budgets of constituent entities of the Russian Federation for the provision of residential premises orphans and children left without parental care, persons from among them under contracts for the rental of specialized residential premises" (Collected Legislation of the Russian Federation, 2015, No. 3, Art. 575). |
