Generalized interval method for solving logarithmic inequalities. All about logarithmic inequalities
Do you think that there is still time before the Unified State Exam and you will have time to prepare? Perhaps this is so. But in any case, the earlier a student begins preparation, the more successfully he passes the exams. Today we decided to devote an article to logarithmic inequalities. This is one of the tasks, which means an opportunity to get extra credit.
Do you already know what a logarithm is? We really hope so. But even if you don't have an answer to this question, it's not a problem. Understanding what a logarithm is is very simple.
Why 4? You need to raise the number 3 to this power to get 81. Once you understand the principle, you can proceed to more complex calculations.
You went through inequalities a few years ago. And since then you have constantly encountered them in mathematics. If you have problems solving inequalities, check out the appropriate section.
Now that we have become familiar with the concepts individually, let's move on to considering them in general.
The simplest logarithmic inequality.
The simplest logarithmic inequalities are not limited to this example; there are three more, only with different signs. Why is this necessary? To better understand how to solve inequalities with logarithms. Now let's give a more applicable example, still quite simple; we'll leave complex logarithmic inequalities for later.
How to solve this? It all starts with ODZ. It’s worth knowing more about it if you want to always easily solve any inequality.
What is ODZ? ODZ for logarithmic inequalities
The abbreviation stands for the range of acceptable values. This formulation often comes up in tasks for the Unified State Exam. ODZ will be useful to you not only in case logarithmic inequalities.
Look again at the above example. We will consider the ODZ based on it, so that you understand the principle, and solving logarithmic inequalities does not raise questions. From the definition of a logarithm it follows that 2x+4 must be greater than zero. In our case this means the following.
This number, by definition, must be positive. Solve the inequality presented above. This can even be done orally; here it is clear that X cannot be less than 2. The solution to the inequality will be the definition of the range of acceptable values.
Now let's move on to solving the simplest logarithmic inequality.
We discard the logarithms themselves from both sides of the inequality. What are we left with as a result? Simple inequality.
It's not difficult to solve. X must be greater than -0.5. Now we combine the two obtained values into a system. Thus,
This will be the range of acceptable values for the logarithmic inequality under consideration.
Why do we need ODZ at all? This is an opportunity to weed out incorrect and impossible answers. If the answer is not within the range of acceptable values, then the answer simply does not make sense. This is worth remembering for a long time, since in the Unified State Exam there is often a need to search for ODZ, and it concerns not only logarithmic inequalities.
Algorithm for solving logarithmic inequality
The solution consists of several stages. First, you need to find the range of acceptable values. There will be two meanings in the ODZ, we discussed this above. Next, you need to solve the inequality itself. The solution methods are as follows:
- multiplier replacement method;
- decomposition;
- rationalization method.
Depending on the situation, it is worth using one of the above methods. Let's move directly to the solution. Let us reveal the most popular method, which is suitable for solving Unified State Examination tasks in almost all cases. Next we will look at the decomposition method. It can help if you come across a particularly tricky inequality. So, an algorithm for solving logarithmic inequality.
Examples of solutions :
It’s not for nothing that we took exactly this inequality! Pay attention to the base. Remember: if it is greater than one, the sign remains the same when finding the range of acceptable values; otherwise, you need to change the inequality sign.
As a result, we get the inequality:
Now we reduce the left side to the form of the equation equal to zero. Instead of the “less than” sign we put “equals” and solve the equation. Thus, we will find the ODZ. We hope that with a solution to this simple equation you won't have any problems. The answers are -4 and -2. That's not all. You need to display these points on the graph, placing “+” and “-”. What needs to be done for this? Substitute the numbers from the intervals into the expression. Where the values are positive, we put “+” there.
Answer: x cannot be greater than -4 and less than -2.
We have found the range of acceptable values only for the left side; now we need to find the range of acceptable values for the right side. This is much easier. Answer: -2. We intersect both resulting areas.
And only now are we beginning to address the inequality itself.
Let's simplify it as much as possible to make it easier to solve.
We again use the interval method in the solution. Let’s skip the calculations; everything is already clear with it from the previous example. Answer.
But this method is suitable if the logarithmic inequality has the same bases.
Solving logarithmic equations and inequalities with for different reasons presupposes an initial reduction to one base. Next, use the method described above. But there is more difficult case. Let's consider one of the most complex types of logarithmic inequalities.
Logarithmic inequalities with variable base
How to solve inequalities with such characteristics? Yes, and such people can be found in the Unified State Examination. Solving inequalities in the following way will also benefit your educational process. Let's look at the issue in detail. Let's discard theory and go straight to practice. To solve logarithmic inequalities, it is enough to familiarize yourself with the example once.
To solve the logarithmic inequality of the presented form, it is necessary to give right side to a logarithm with the same base. The principle resembles equivalent transitions. As a result, the inequality will look like this.
Actually, all that remains is to create a system of inequalities without logarithms. Using the rationalization method, we move on to an equivalent system of inequalities. You will understand the rule itself when you substitute the appropriate values and track their changes. The system will have the following inequalities.
When using the rationalization method when solving inequalities, you need to remember the following: one must be subtracted from the base, x, by definition of the logarithm, is subtracted from both sides of the inequality (right from left), two expressions are multiplied and set under the original sign in relation to zero.
The further solution is carried out using the interval method, everything is simple here. It is important for you to understand the differences in solution methods, then everything will start to work out easily.
There are many nuances in logarithmic inequalities. The simplest of them are quite easy to solve. How can you solve each of them without problems? You have already received all the answers in this article. Now you have a long practice ahead of you. Constantly practice solving a variety of problems in the exam and you will be able to get the highest score. Good luck to you in your difficult task!
Logarithmic inequalities
In previous lessons, we got acquainted with logarithmic equations and now we know what they are and how to solve them. Today's lesson will be devoted to the study of logarithmic inequalities. What are these inequalities and what is the difference between solving a logarithmic equation and an inequality?
Logarithmic inequalities are inequalities that have a variable appearing under the logarithm sign or at its base.
Or, we can also say that a logarithmic inequality is an inequality in which its unknown value, as in a logarithmic equation, will appear under the sign of the logarithm.
The simplest logarithmic inequalities have the following form:
where f(x) and g(x) are some expressions that depend on x.
Let's look at this using this example: f(x)=1+2x+x2, g(x)=3x−1.
Solving logarithmic inequalities
Before solving logarithmic inequalities, it is worth noting that when solved they are similar to exponential inequalities, namely:
First, when moving from logarithms to expressions under the logarithm sign, we also need to compare the base of the logarithm with one;
Secondly, when solving a logarithmic inequality using a change of variables, we need to solve inequalities with respect to the change until we get the simplest inequality.
But you and I have considered similar aspects of solving logarithmic inequalities. Now let’s pay attention to a rather significant difference. You and I know that the logarithmic function has limited area definitions, therefore, moving from logarithms to expressions under the logarithm sign, you need to take into account the range of permissible values (APV).
That is, it should be taken into account that when deciding logarithmic equation You and I can first find the roots of the equation, and then check this solution. But solving a logarithmic inequality will not work this way, since moving from logarithms to expressions under the logarithm sign, it will be necessary to write down the ODZ of the inequality.
In addition, it is worth remembering that the theory of inequalities consists of real numbers, which are positive and negative numbers, as well as the number 0.
For example, when the number “a” is positive, then you need to use the following notation: a >0. In this case, both the sum and the product of these numbers will also be positive.
The main principle for solving an inequality is to replace it with a simpler inequality, but the main thing is that it is equivalent to the given one. Further, we also obtained an inequality and again replaced it with one that has a simpler form, etc.
When solving inequalities with a variable, you need to find all its solutions. If two inequalities have the same variable x, then such inequalities are equivalent, provided that their solutions coincide.
When performing tasks on solving logarithmic inequalities, you must remember that when a > 1, then the logarithmic function increases, and when 0< a < 1, то такая функция имеет свойство убывать. Эти свойства вам будут необходимы при решении логарифмических неравенств, поэтому вы их должны хорошо знать и помнить.
Methods for solving logarithmic inequalities
Now let's look at some of the methods that take place when solving logarithmic inequalities. For better understanding and assimilation, we will try to understand them using specific examples.
We all know that the simplest logarithmic inequality has the following form:
In this inequality, V – is one of the following inequality signs:<,>, ≤ or ≥.
When the base of a given logarithm is greater than one (a>1), making the transition from logarithms to expressions under the logarithm sign, then in this version the inequality sign is preserved, and the inequality will have the following form:
which is equivalent to this system:
In the case when the base of the logarithm is greater than zero and less than one (0 This is equivalent to this system: Let's look at more examples of solving the simplest logarithmic inequalities shown in the picture below: Exercise. Let's try to solve this inequality: Solving the range of acceptable values. Now let's try to multiply its right side by: Let's see what we can come up with: Now, let's move on to converting sublogarithmic expressions. Due to the fact that the base of the logarithm is 0< 1/4 <1, то от сюда следует, что знак неравенства изменится на противоположный: 3x - 8 > 16; And from this it follows that the interval that we obtained entirely belongs to the ODZ and is a solution to such an inequality. Here's the answer we got: Now let's try to analyze what we need to successfully solve logarithmic inequalities? First, concentrate all your attention and try not to make mistakes when performing the transformations that are given in this inequality. Also, it should be remembered that when solving such inequalities, it is necessary to avoid expansions and contractions of the inequalities, which can lead to the loss or acquisition of extraneous solutions. Secondly, when solving logarithmic inequalities, you need to learn to think logically and understand the difference between concepts such as a system of inequalities and a set of inequalities, so that you can easily select solutions to the inequality, while being guided by its DL. Thirdly, to successfully solve such inequalities, each of you must perfectly know all the properties of elementary functions and clearly understand their meaning. Such functions include not only logarithmic, but also rational, power, trigonometric, etc., in a word, all those that you studied during school algebra. As you can see, having studied the topic of logarithmic inequalities, there is nothing difficult in solving these inequalities, provided that you are careful and persistent in achieving your goals. To avoid any problems in solving inequalities, you need to practice as much as possible, solving various tasks and at the same time remember the basic methods of solving such inequalities and their systems. If you fail to solve logarithmic inequalities, you should carefully analyze your mistakes so as not to return to them again in the future. To better understand the topic and consolidate the material covered, solve the following inequalities: Maintaining your privacy is important to us. For this reason, we have developed a Privacy Policy that describes how we use and store your information. Please review our privacy practices and let us know if you have any questions. Personal information refers to data that can be used to identify certain person or connection with him. You may be asked to provide your personal information at any time when you contact us. Below are some examples of the types of personal information we may collect and how we may use such information. What personal information do we collect: How we use your personal information: We do not disclose the information received from you to third parties. Exceptions: We take precautions - including administrative, technical and physical - to protect your personal information from loss, theft, and misuse, as well as unauthorized access, disclosure, alteration and destruction. To ensure that your personal information is secure, we communicate privacy and security standards to our employees and strictly enforce privacy practices. An inequality is called logarithmic if it contains a logarithmic function. Methods for solving logarithmic inequalities are no different from, except for two things. Firstly, when moving from the logarithmic inequality to the inequality under logarithmic functions should follow the sign of the resulting inequality. It obeys the following rule. If the base of the logarithmic function is greater than $1$, then when moving from the logarithmic inequality to the inequality of sublogarithmic functions, the sign of the inequality is preserved, but if it is less than $1$, then it changes to the opposite. Secondly, the solution to any inequality is an interval, and, therefore, at the end of solving the inequality of sublogarithmic functions it is necessary to create a system of two inequalities: the first inequality of this system will be the inequality of sublogarithmic functions, and the second will be the interval of the domain of definition of the logarithmic functions included in the logarithmic inequality. Let's solve the inequalities: 1.
$\log_(2)((x+3)) \geq 3.$ $D(y): \x+3>0.$ $x \in (-3;+\infty)$ The base of the logarithm is $2>1$, so the sign does not change. Using the definition of logarithm, we get: $x+3 \geq 2^(3),$ $x \in )
Solving Examples
3x > 24;
x > 8. 
What is needed to solve logarithmic inequalities?
Homework
Collection and use of personal information
Disclosure of information to third parties
Protection of personal information
Respecting your privacy at the company level
Practice.
