Homemade pistol made of wood. Weapons made of plywood: types of products and their features, production of construction sets, dummies, bows and butts
Weapons in the Philippines
In the Philippines, this place is called the “city of weapons.” For more than a century, Danaoans have made their living by manufacturing weapons. These people know how to assemble pistols, revolvers and machine guns by hand. The authorities created a cooperative in order to legalize the production of weapons. But instead of making money through legal means, most collaborate with the local mafia.
Jose takes the gun in his hands and looks into the sight. He thinks for a moment, and then places the mold in a vice, which is on this moment is nothing more than a semblance of a future pistol, a piece of metal. José Arnescar will have to spend many days at work before this form takes its form. firepower. This muscular 33-year-old worker puts all his strength into working on the bolt. “This is the hardest part,” he says breathlessly. “It will take at least a week to complete the work.” This is the most important part of the weapon, so Jose will only use a file in his work.
We are located in the world's largest gun manufacturing cooperative, located in Danao on Cebu Island in the heart of the Philippines. This organization is unique in its essence; it is here that 38 and 45 caliber weapons, pump-action shotguns and even some models of machine guns are produced. 90% of the total production volume is produced manually.
In this huge old room there are only a few machines, its roof is leaky and does not protect from rain, which is why fabric is hung on top to protect the electrical wiring. There is such noise in the dimly lit room that you feel like you are in a mountain tunnel.
About 30 workers can work and modify their weapons on 2 main machines. Using a drill, each item is engraved with “WORLD” and a serial number. There is one more big machine, which is considered the most important thing in the work, it produces drums. “This is the most important machine,” says June, watching his colleague finish his part of the job. “Thanks to it, we can do work that would be very difficult to do by hand.” “We don’t have many tools,” the worker says with regret in his voice.
In this production, each worker independently creates a weapon from start to finish, and after the sale receives almost the full cost in hand. Mostly 38 and 45 caliber weapons are produced here, as well as pump-action shotguns. It takes a week to make a 38 caliber pistol that can be sold for 30 euros; a 45 caliber pistol takes twice as long to produce, but its price also increases. The workers of this cooperative receive an average of 70 euros per month, which is the minimum wages in the Philippines. Nearly 100 guns come out of these workshops every month, most of them ordered by police and soldiers who are not issued weapons on the job and for whom this is the cheapest way to get one. This weapon is also in demand among store and bank security guards.
Weapon making is considered an old tradition in Danao. They say that even under the Spaniards, arquebuses were made here. But the main production was formed at the beginning of the 20th century, when the Philippines was an American colony. During World War II, the Americans used the skills of the Danaans to convert captured Japanese weapons to their own caliber. It is from those times that hand-made weapons have been produced here.
As a result, in 1996, the authorities organized a legal cooperative for the production of weapons. But, despite all the efforts of the authorities, the majority of workers produce weapons illegally, not obeying the cooperative.
Finding such illegal production is not difficult. In the city center you can find the small house of Renato Gonzalez. Its entire production consists of a simple vice and a set of tools. In his workshop you can see the mold for the KG-9, a lightweight machine gun similar to the Israeli-made UZI. It took Renato 2 weeks to produce it, and he received 100 euros for the work. The 52-year-old worker learned his skills from his grandfather and father, who were also involved in the production of weapons. “I was 8 years old when I started helping them,” recalls Renato. - I was returning from school and learning to work with a file. I'm doing this now so my kids can go to college."
According to Nestor Sabaiton, who led the cooperative until 2007, at least 5,000 people produce weapons illegally in Danao.
Naturally, there must be a person who would supervise these illegal workers. In Danao, this man is called "Rio Shark", he is one of the most experienced weapons manufacturers. In his workshop you can see a finished AR-15 automatic rifle, which is very reminiscent American rifle M-16. This weapon, worth 500 euros, was ordered by the mayor of a large neighboring city. “This is the second time I have received an order to make something like this,” says Rio. His son adds: “We had a lot of orders just before the election. A lot of politicians wanted pistols or rifles like this.”
Local elections in the Philippines have a bad reputation. For example, in 2007, 114 candidates and party members were killed during the election campaign. In addition, bank robberies are often accompanied by murders. In May 2008, there was a high-profile robbery during which the perpetrator shot and killed 10 people. There are believed to be more than a million firearms in circulation in the Philippines, with a third unlicensed.
Despite the similar situation in the country, everything is calm in the Danao police stations. In 2007, only 2 people were detained for illegal production and 18 for illegal possession of weapons. “We know that there are several illegal gun manufacturers in the city,” says Lt. Lacson Dehino, “but when we find them, we try to encourage them to join the cooperative, and if they refuse, they will be arrested.”
The illegal arms business does not seem to disturb the tranquility of Danao, where 120,000 residents lead a normal life. So a resident of Danao says with humor: “If you hear shots on the streets of Danao, it’s okay, it’s just one of the masters testing his new weapon in action.”
Today, toy stores offer such a large and colorful selection that parents are clutching their heads and children are drooling. Unfortunately, the economic situation and one’s own capabilities do not always allow one to have sufficient income to please one’s own child. a good gift. Hands and head help us! You can always make some of the toys yourself. Many craftsmen cut cars, horses, whatever they want out of wood and sell them.
Wood is a very convenient material, with minimal skill in handling it and necessary tools, a lot can be done. For girls, you can cut out dolls, furniture, dishes from it, and for boys - a car, a pistol, a sword. The question of how to make weapons from wood is of great interest to them!
Wooden weapon options
In fact, you can do a lot, the main thing is, why do you need a specific thing? For a child who will play in the yard, for using weapons for their intended purpose, for role playing games, for hunting or maybe for a costume? Homemade weapons made of wood will take the shape and appearance that you desire.
If the main purpose is a game, then the main thing in this case is durability. All paint and thin fragile parts will fall off in a few days, if not immediately. When schools hold military training camps, and schoolchildren are given wooden Kalashnikov assault rifles, 50% of the guys tear off magazines on the first or second day. But these machines are made in bulk, not really caring about beauty, painting them in one color and trying to make them stronger. How to make a weapon out of wood that won't break, you ask? No way, the item will remain intact only if you do not use your product.
For roleplayers, the situation is much more complicated; they need weapons that are both beautiful and durable, so they often use other materials. If it is wood, then they make two swords or knives, one beautiful, the other durable.
Material selection and processing
The choice of material determines how much processing time will be required. Birch is a very strong and unyielding tree; it is good for making a club; without special treatment the product will be heavy. Aspen, poplar, and pine are softer and easy and pleasant to work with. Oak is rare in many regions of Russia, but if you decide to make a weapon with your own hands from wood, then better material You're unlikely to find it. It is easier to process than birch, lighter in weight and stronger than pine, and retains its quality well over time.
The wood for products must be free of knots, wood holes, rot, with a uniform direction of fibers, and without curvature. It is necessary to dry it, preferably in a dry room or under a canopy. It is necessary that the wood dries evenly without direct impact sun rays, otherwise it will begin to crack and bend later.
Making a Club
The simplest wooden weapon is a club or stick. What could be simpler, break off a branch - and you're done. But if you suddenly decide to take this issue seriously, you want to make a durable, light, comfortable product, then you are faced with the question “how”. Making a weapon out of wood according to all the rules is not easy.
For the club they choose young tree suitable sizes. They cut down closer to the root, since at the butt the fibers begin to intertwine, making the material even more durable. Then, carefully, so as not to damage the top layers, remove the bark, cut off the knots, give the desired shape to the handle, and if necessary, soak the workpiece in water or special brines for a day. Then the drying begins, a fire is lit and, using the smoke, protecting the future club from the flames, it is dried. As soon as the tree has turned black, the blackness is removed fine sand or hard grass. This is repeated six times, the surface becomes smooth and dry. Even if birch was chosen, the final product will be light and durable. Such wood does not rot.
Using the same principle, our ancestors made strong arrows and spears without steel tips.
Shield and sword
How to make weapons from wood for role-playing games and historical reconstructions? If for beauty and ambience, then it is very convenient to cut out a shape from plywood with a jigsaw, smooth the edge, varnish, paint, and insert decorations. If the paint is good, without holding the item in your hands, it will be difficult to determine what material it is made of. For combat, it is worth making a weapon from thick, durable wood, with a comfortable handle, so that the vibration from the impact is less transferred to the hand, otherwise you can damage the hand or simply drop the object during the first hard collision.
The shield can be made perfectly from plywood, but for combat it is better to use iron-bound or steel versions with a shock-absorbing lining. During reconstructions they usually show a wall-to-wall battle, in which it is extremely difficult to strike a strong blow to the shield. A good and durable one is needed for individual combat; for all other cases, plywood is suitable.
Firearms mockups
No matter how much you would like to, make it homemade firearms it is impossible to make a tree that will shoot. Maybe for one or two shots, and it’s not a fact that the weapon won’t explode when the gunpowder explodes.
All self-propelled schemes come down to one algorithm. The tree is a frame to which the barrel is attached, a trigger with a striker, and sometimes a magazine is added. Inconvenient, short-lived, but cheap and cheerful.
Hunting weapon
Do you remember running around the yards with slingshots as a child? If you haven't run, be sure to try it, you will like it. Modern elastic materials impart such striking power to a small metal ball or pebble that, with proper skill, you can knock down targets from thirty paces. But the frame of a slingshot can be easily made from wood.
Drawings of weapons made of wood for hunting are quite common. This is how crossbows and bows are made. It's not that difficult to make a wooden frame; it requires sleight of hand and no magic. But there is an important detail that is needed to make weapon lethal and effective over long distances. For this you need shoulders that are flexible and strong, as well as a bowstring. There are old technologies for making shoulders, but nowadays it is too labor-intensive and difficult to implement at home. Easier to apply modern materials type of plastic.
It is best to make the main frame from wood, and the shoulders from flexible, rot-resistant plastic; a synthetic cord will go to the bowstring. A little decoration and paint, and you’ll get a very attractive and effective bow.
You are going to play cowboys or scouts. Or maybe you want to organize a competition in accuracy. Then you absolutely need a pistol. If you don't have a toy gun, you can make your own. As a result, you will have a shooting pistol that looks like a real weapon.
How to make a gun that shoots paper
Take thick paper or cardboard and fold it in half. On one half, close to the fold, draw the contours of the weapon according to the diagram. Carefully cut out the design.
Make a groove for the cartridge. To do this, cut the top of the barrel and fold the paper inward so that in profile the barrel looks like the letter “M”.
Make a thin cut on each side of the trunk and insert a thin elastic band there. This will be your trigger.
Color the gun as you wish. The handle can be covered with fabric to give it roughness.
Pull the elastic back and secure it to the shutter. Place a ball of paper rolled into the groove. Its radius should be slightly less than the depth of the gutter. Take the gun in your hands and thumb slide the elastic up. The rubber band that slips off will hit the ball and it will fly to the target.
How to make a gun at home using a balloon
Take 2 cardboard tubes. One is longer (barrel), the other is shorter (handle). At the top of the “handle”, cut a semicircle-shaped recess so that you can smoothly connect it to the barrel. By changing the depth of the front and rear cutouts, you can adjust the angle of contact of the barrel with the handle. Fasten the pieces together using glue or tape.
Cut balloon across in half. The part with the inflation hole can be removed. Pull the second half over the end of the barrel, closing the hole on the side of the handle, and secure. Please note that if you tighten the rubber too much, it will be difficult to shoot.
Give the gun a realistic look by covering it with paper, painting it with paints and pencils.
To fire, lift the pistol up with the muzzle, place the cartridge, take aim, pull back the ball membrane with your fingers and release sharply. You can use rolled paper or plastic balls as bullets.
How to make a gun from wood
Take a piece of wood 20x12 cm, 2.5 cm thick. Draw the outline of the gun on the surface of the wood. It is best to use a template or dummy for this.
Cut the blank out of wood. To do this, you can use a band saw.
Using a sander, round off the edges of the handle, barrel, and trigger guard. At this stage you need to be careful not to remove excess.
The hammer is cut with a scroll saw while the gun is held in a vise.
Recesses on the trunk are made with a cutter.
Use a rasp to give the hammer its final shape.
The notches on the trunk are cut out with a rasp or a grinding machine.
Smaller parts of the gun are cut out with a chisel.
Finally, go over the gun with medium sandpaper, and then polish it with a scratch pad.
How to make a gun at home from plywood
Transfer the image of the parts onto plywood and cut them out.
Glue the right and left parts of the gun to the internal parts.
Place the trigger (D) inside. Drill a hole as shown in the figure, insert a screw into it and secure with a nut. Attach the rubber band to the barrel with nails.
The rubber band clings to the trigger, the gun is loaded. After pressing the trigger, a shot occurs. You can use pieces of plywood, buttons, or other small things as bullets.
How to make a gun out of paper
Fold a landscape sheet of paper along the short side into a thin strip. This will be the trunk, so roll the paper as tightly as possible. Once you have folded the sheet, fold it in half.
Take another landscape sheet and fold it in the same way as the first, but so that the workpiece is wider (handle). Fold it in half.
Unfold the blanks. Place the “barrel” on the “handle”. Visually divide the wide part into 3 parts and alternately bend the outer parts towards the center. To obtain even bends, it is convenient to use a narrow piece.
Fold the handle in half, fold the edges along the intended fold. Cut a small longitudinal hole at the base of the workpiece.
Take a landscape sheet and roll it (maybe not all the way) along long side(trigger). You need to bend the sheet as small as possible. Then fold the piece in half and insert it into the hole you just cut.
Slide the barrel blank into the “pockets” of the handle blank. Iron all the folds again. Trim the exposed edge of the trigger.
Bend the landscape sheet lengthwise as described earlier. As a result, you should end up with a piece slightly wider than the handle. Seal the edge with tape. Make small cuts along the folds and place the workpiece on the handle, cutting off the excess. Now your pistol is comfortable to hold.
Bend the album sheet crosswise as described earlier. As a result, you should have a blank approximately the width of the trunk. Bend it in half. Bend the upper corners of the ends of the workpiece inward, step back a few millimeters from the fold and cut it off. Place the blank on the back of the barrel. Tuck the cut, folded edges behind the handle.
The gun is ready. Paint it, giving the weapon a menacing look. The gun shoots paper stars. Its power is enough to close range knock down an iron can.
Video, make a gun out of paper
If you still have questions, or some point is not clear, watch the video on making a paper gun. True, it is in English, but everything is shown clearly and is understandable without knowledge of foreign languages
How to make a gun that shoots marshmallows
You can load it with paper or shady balls, chewing gum, but then the accuracy and range of the shot is reduced.
You will need: a PVC pipe - 55 cm, a pair of corners, tees and PVC plugs; cutting tool.
Cut 5 tubes 7.5 cm long from the pipe. The length of the remaining section should be 17.5 cm.
Assemble the gun according to the diagram.
All parts must fit tightly to each other.
Load the weapon with marshmallows and blow sharply into the top tube. The pistol shoots several meters, but if the marshmallow is dry, its accuracy decreases.
How to make a homemade pistol simulator
This gun not only looks scary. It can be used for rapid fire training. But to make it you will need wooden and metal parts shown in the diagrams, and certain skills.
The pistol model consists of a wooden blank (the dimensions of the handle are adjusted to suit the shooter’s hand), a hammer trigger mechanism, a front sight and a rear sight with a slot.
Metal weights are inserted into the handle to balance and adjust the weight of the machine. (Fig. 10). The length of the weights is 116 and 86 mm. The weights are fastened with screws with a diameter of 3 mm. The front sight and rear sight protrude above the surface by 5-7 mm.
The gun is assembled in this order.
A starting spring (Fig. 6) is attached to plane B, located on the base of the mechanism (Fig. 4); it is made of steel grades 55, 65G, 70G. Then screw the trigger to plane B in such a way (Fig. 5) that under the pressure of the spring, after pressing, it can easily return to its initial position.
Insert and secure the spring (Fig. 8) into the slot of the striker (Fig. 7); it is made of carbon wire. Screw the hammer with the spring to plane B so that it rotates freely.
Then screw the base to the body (Fig. 9) with two screws, adjust the hook between the trigger and the firing pin.
After pressing the trigger, it should catch on the firing pin and rotate it until the firing pin comes out of the hook under the action of the spring and hits the body (imitation of a shot). When returning to the initial position, the trigger pushes the firing pin upward to engage it. The engagement should be more than 1.2 mm. If engagement does not occur, file off the trigger and firing pin tabs.
Secure the trigger mechanism - it is secured with 2 screws in the housing on the right.
The trigger force can be adjusted by turning screw b (Fig. 1, 2, 13).
Remember, even toy pistol is a weapon. If you hit a person in the eye, you will most likely leave him crippled for life, and if you hit him in the face, you can cause serious injury. Therefore, never point the gun at animals or people. Avoid shooting at fragile, unstable objects (glass, dishes, etc...).
A pistol made of wood... How many childhood memories are there in this combination of words... Memories of how very young boys and girls chased each other, imagining themselves as robbers and those who caught them. The robbers “shoot” from the simplest toys made of simple wood; they became the first pistols, the first toy weapons made with their own hands. This article will discuss how to make a pistol from wood.
Making weapons is not just a children's dream
If in childhood you simply took a piece of wood that was suitable in shape, now you can use special tools and make a toy that is practically no different from a real weapon. If you build the gun correctly, it will even be able to fire. made of wood can please not only boys, but also their fathers.
Let's start production
To make a “weapon” you will need: a piece of rubber drill with a drill no larger than 6 mm, a well-sharpened knife, a saw, a file, sandpaper, a knitting needle or a nail of the same length. To understand how to make a pistol from wood, it is worth knowing that the design of this product is divided into three elements: solid handles and barrel, pistons and rubber bands.
First of all, you will need to make the barrel and handle of the gun. They need to be cut out of wood, the thickness should be at least 2 cm. You can choose any shape.
The main thing is that you like it and be comfortable. Don’t throw away the rest of the block, you will need it later.
We continue to answer the question of how to make a gun from wood. In the finished trunk, use a drill to make a hole along the entire length. Sand the hole made thoroughly with sandpaper. To do this, you need to roll the paper into a tube and put it on a suitable stick; either a long nail or a knitting needle will do. From the remaining piece of wood you need to make a piston. It looks like a long wooden stick, slightly less than 6 mm in diameter. There should be a slight thickening on one part of the piston. This end will be called the sear. The piston itself must be the entire length of the barrel and freely enter and exit it. You need to attach an elastic band to the thickening. It or the tape must be cut from a piece of a bicycle inner tube. Instead of a wooden rod, you can simply take a long nail. His hat will serve as a sear. The nail itself must be cut to the length of the barrel, and the cut area must be sanded well with a file to completely dull it.
The finished piston is placed in the barrel of the pistol, while at the same time it is necessary to pull the rubber band onto the handle of the weapon. The sear will need to be adjusted so that when it is pulled back the trigger is raised. You should also make sure that it can catch on the protrusion on the pistol handle. At the same time, the piston will be firmly fixed in the cocked state. The DIY gun made of wood is ready.
We fire a training salvo
You need to shoot from such a design in this way: take the pistol in your hand, thumb At the same time, the hands push the sear upward, it slides and moves the piston along the barrel. If you don’t know how to make a gun out of wood, then this article should help you achieve excellent results.
