How to make a revolver from plywood. How to make a gun from wood: step-by-step master classes with photos

All photos from the article

Very often it is necessary to make replicas of weapons or toys for children, and plywood as a material is excellent for these purposes. In this review we will talk about some types of products and figure out how to make them with your own hands. There are simpler and more complex models, but with some perseverance you can master any of the options described below.

What do you need for work?

To make certain products, you must have the required materials and tools on hand. Of course, the list may vary significantly; we will list only the most basic components that are almost always on hand:

Important!
It is better to use high-quality plywood rather than materials of the third and fourth grade, as they look worse and have lower strength indicators.

Some types of products and their features

Let us note right away that not all products are legal; plywood brass knuckles are weapons that can cause injury, and you may be held accountable for wearing them. We will only talk about those options that can be done without any restrictions.

Constructors

This option is suitable for those who like to collect 3D models or want to make an unusual and interesting gift to your child.

Let's look at the example of a pistol:

• First you need to find all the necessary circuits. As is known, such products consist of many components, therefore it is very important to find a very high-quality drawing that will consist of patterns of all the required elements. The more detailed it is, the better the final result will be;

• Next, using carbon paper, you need to transfer the contours of all elements onto the plywood; do this carefully using a pen or a sharp pointer. The lines can be made more distinct with a pencil, it is important to ensure their good visibility;
• Cutting is best done using a stationary device., a jigsaw is suitable for rough processing and is inconvenient to work with when cutting out small elements. Try to do everything as carefully as possible;

Important!
To prevent damage to the ends and cracking when sawing, it is best to treat the surface with a mixture of PVA glue and water in a 1:2 ratio.

• The easiest way to make notches is this way: first, a hole is drilled equal in size to the width of the groove, after which cutting is done with a jigsaw;
• The last step is grinding the ends so that they are smooth and not scratched during assembly.

Models

If you are interested in the question of how to make a pistol from plywood or another type of weapon that will resemble a real one, then this section will help you:

• First of all, you need to find the necessary circuits. Moreover, you will not need drawings of weapons made of plywood, but real sketches with the exact dimensions and geometry of each element;

• Very often it is necessary to glue several elements together, the instructions for carrying out the work are simple: the pieces are connected with glue and compressed using clamps. The fixation is removed after the composition has completely dried;
• Next, you need to give the workpiece the shape of the desired product or part of it.. Rough work is best done with a jigsaw, and if there are holes or openings, the holes are first drilled, and then the recess is given the desired configuration;
• Then comes the most difficult and time-consuming part of the process - cutting out various elements and giving the surface a realistic look. To do this, cutters of various configurations are used; it is better to practice on simpler elements so as not to spoil the result of the work and not to redo everything again. As a result, you should get an exact model of the original;
• After this, you need to carefully sand the surface to round all planes and give the material ideal smoothness where necessary.. For rough processing, sandpaper M80-M100 is used, for finishing - M180 and finer;

• Finally, in order to give maximum believability, the finished version should be skillfully colored. The coloring, as a rule, is the same as the original, so you can buy paints in the desired colors in advance.

Models of bladed weapons can be made in the same way; the same plywood sword will be an excellent addition to a child’s New Year’s costume, and if you make it life-size, it can be used as a training option for those who want to master fencing.

Bows

You can make a bow with your own hands from plywood, and it will be fully functional and you can shoot at targets from it. Of course, it is unlikely that it will be possible to create a long-range hunting option, but it will please yourself and your children active recreation you can.

The work is done as follows:

• For the handle you need to glue two pieces of bakelite plywood 20 mm thick together, the size of the elements should be approximately 60x400 mm to obtain a full-fledged unit;
• After gluing with a jigsaw, the part is given the desired shape, the pattern is best found in specialized literature. Next, you need to use a cutter to give the surface such a relief that it is comfortable to hold during use;

• Holes are drilled on both sides for M6 bolts, which will secure the arms. They are best made from 16 mm thick plywood; if you have 8 mm sheets, you can glue the two elements together using wood glue;
• Pieces of plywood are glued to the ends to make a shelf for the bowstring, after the glue has dried, they are given the desired shape and grooves 3 mm wide and 8-9 mm deep are cut out;

• Next, all elements are sanded and coated to protect them from moisture.. The structure is assembled, and a 3.5 mm thick Kevlar sling is purchased for the bowstring from a climbing equipment store. At this point, the question of how to make a bow from plywood can be considered closed.

Butts

If you need to make a stock or, as it is also called, a stock, then plywood can also be a great option.

The works are as follows:

• First of all, you need to glue a couple of pieces of the required size to obtain the required thickness, since standard options are not enough;
• Next, you need to outline the future profile of the product and carry out rough cutting using a jigsaw;
• The next stage is cutting out a niche for the mechanism, here it is important to do everything as accurately as possible so that the system is fastened securely and correctly, any shifts will lead to the fact that you will not be able to use the weapon normally;
• Then the surface is given a relief: the bed is rounded, recesses and contours are made, the shape of which can differ significantly. This is meticulous work with a cutter, which takes a lot of time;
• When all modifications are completed, you can sand the surface and apply it to it. protective composition. For example, this is how you make a plywood stock with your own hands.

Conclusion

Plywood is an excellent material for making models, dummies, and even full-fledged weapons. It is important to do everything carefully and use high-quality raw materials, and the video in this article will clearly show some of the work described. If you have valuable comments or questions on the topic, then ask them in the comments.

Weapons in the Philippines

In the Philippines, this place is called the “city of weapons.” For more than a century, Danaoans have made their living by manufacturing weapons. These people know how to assemble pistols, revolvers and machine guns by hand. The authorities created a cooperative in order to legalize the production of weapons. But instead of making money through legal means, most collaborate with the local mafia.

Jose takes the gun in his hands and looks into the sight. He thinks for a moment, and then places the mold in a vice, which is on this moment is nothing more than a semblance of a future pistol, a piece of metal. José Arnescar will have to spend many days at work before this form takes its form. firepower. This muscular 33-year-old worker puts all his strength into working on the bolt. “This is the hardest part,” he says breathlessly. “It will take at least a week to complete the work.” This is the most important part of the weapon, so Jose will only use a file in his work.

We are located in the world's largest gun manufacturing cooperative, located in Danao on Cebu Island in the heart of the Philippines. This organization is unique in its essence; it is here that 38 and 45 caliber weapons, pump-action shotguns and even some models of machine guns are produced. 90% of the total production volume is produced manually.

In this huge old room there are only a few machines, its roof is leaky and does not protect from rain, which is why fabric is hung on top to protect the electrical wiring. There is such noise in the dimly lit room that you feel like you are in a mountain tunnel.

About 30 workers can work and modify their weapons on 2 main machines. Using a drill, each item is engraved with “WORLD” and a serial number. There is another large machine, which is considered the most important in the work; it produces drums. “This is the most important machine,” says June, watching his colleague finish his part of the job. “Thanks to it, we can do work that would be very difficult to do by hand.” “We don’t have many tools,” the worker says with regret in his voice.

In this production, each worker independently creates a weapon from start to finish, and after the sale receives almost the full cost in hand. Mostly 38 and 45 caliber weapons are produced here, as well as pump-action shotguns. It takes a week to make a 38 caliber pistol that can be sold for 30 euros; a 45 caliber pistol takes twice as long to produce, but its price also increases. The workers of this cooperative receive an average of 70 euros per month, which is the minimum wages in the Philippines. Nearly 100 guns come out of these workshops every month, most of them ordered by police and soldiers who are not issued weapons on the job and for whom this is the cheapest way to get one. This weapon is also in demand among store and bank security guards.

Weapon making is considered an old tradition in Danao. They say that even under the Spaniards, arquebuses were made here. But the main production was formed at the beginning of the 20th century, when the Philippines was an American colony. During World War II, the Americans used the skills of the Danaans to convert captured Japanese weapons to their own caliber. It is from those times that hand-made weapons have been produced here.

As a result, in 1996, the authorities organized a legal cooperative for the production of weapons. But, despite all the efforts of the authorities, the majority of workers produce weapons illegally, not obeying the cooperative.

Finding such illegal production is not difficult. In the city center you can find the small house of Renato Gonzalez. Its entire production consists of a simple vice and a set of tools. In his workshop you can see the mold for the KG-9, a lightweight machine gun similar to the Israeli-made UZI. It took Renato 2 weeks to produce it, and he received 100 euros for the work. The 52-year-old worker learned his skills from his grandfather and father, who were also involved in the production of weapons. “I was 8 years old when I started helping them,” recalls Renato. - I was returning from school and learning to work with a file. I'm doing this now so my kids can go to college."

According to Nestor Sabaiton, who led the cooperative until 2007, at least 5,000 people produce weapons illegally in Danao.

Naturally, there must be a person who would supervise these illegal workers. In Danao, this man is called "Rio Shark", he is one of the most experienced weapons manufacturers. In his workshop you can see a finished AR-15 automatic rifle, which is very reminiscent American rifle M-16. This weapon, worth 500 euros, was ordered by the mayor of a large neighboring city. “This is the second time I have received an order to make something like this,” says Rio. His son adds: “We had a lot of orders just before the election. A lot of politicians wanted pistols or rifles like this.”

Local elections in the Philippines have a bad reputation. For example, in 2007, 114 candidates and party members were killed during the election campaign. In addition, bank robberies are often accompanied by murders. In May 2008, there was a high-profile robbery during which the perpetrator shot and killed 10 people. There are believed to be more than a million firearms in circulation in the Philippines, with a third unlicensed.

Despite the similar situation in the country, everything is calm in the Danao police stations. In 2007, only 2 people were detained for illegal production and 18 for illegal possession of weapons. “We know that there are several illegal gun manufacturers in the city,” says Lt. Lacson Dehino, “but when we find them, we try to encourage them to join the cooperative, and if they refuse, they will be arrested.”

The illegal arms business does not seem to disturb the tranquility of Danao, where 120,000 residents lead a normal life. So a resident of Danao says with humor: “If you hear shots on the streets of Danao, it’s okay, it’s just one of the masters testing his new weapon in action.”

Sometimes there comes a moment in the relationship between father and child when all the games and entertainment are practically running out. You have to rack your brains to find new forms of leisure in order to captivate your child as much as possible and not let him get bored. In such cases, the Internet or special printed publications, in which it is collected huge base games for every taste and taking into account age characteristics.

How to make a gun from wood

One of the proven ways to engage a child can be military sports games, such as fresh air, and within a house or apartment. Moreover, most interesting game it will be if everything necessary equipment and make your own ammunition.

The key element in this type of game is weapons, and in particular all kinds of pistols and machine guns. You can use weapons purchased in a store, but the most exciting and interesting thing will be to make a pistol from wood with your own hands. This activity can interest the child and contribute to the development of new skills and abilities. At the stage of preparation for the game, the question may arise about how to make a pistol out of wood. You don't need any supernatural abilities to do this. The whole process will not seem overly complicated.

Necessary materials

To do this, you will need some tools and materials that can easily be found at home or in the country: a board made of non-solid wood, a ruler, a pencil or pen, a plane, a hacksaw, a file, a vice or clamps, a wood burning machine, sandpaper and varnish. This will be quite enough to make a homemade pistol made of wood.

Some stages in the process of making a toy can be done by a child. Direct participation in the process of making a pistol will not allow him to get bored.

Also an important and desirable point in the manufacture homemade weapons is a drawing of a pistol made of wood. You can easily find it on the Internet or draw it yourself, taking into account all the wishes for the future product.

Making a pistol

On initial stage You should take an existing board and select an area on it without knots, holes or damage. Optimal thickness wood material should be 30-40 mm. It is desirable that the wood is sufficiently dried, which will make it easier to sand at the final stage. Using a hacksaw, you need to cut out the required workpiece and carefully process its surface using a plane and sandpaper. The thickness of the board should be the same throughout its entire thickness.

Drawing selection

Having decided on the model and parameters of the pistol, you need to make a drawing of it or modify the existing one, taking into account all the nuances and wishes. It is possible to use illustrations or photographs of the weapon you like to recreate the smallest details as much as possible. You can turn to specialized forums, where they can tell you how to make a wooden pistol as similar as possible to the original.

The next step will be this: you should transfer the image of the previously made drawing to the existing workpiece, preserving all the parameters and dimensions and taking into account all the smallest details and features of the future pistol. To make it convenient to cut a wooden workpiece, it can be secured in a table vice or using clamps. This will greatly facilitate the process of making a pistol. It is worth cutting out parts not strictly according to the applied contour, but with a little margin for finishing.

Workpiece processing

Using a file, sandpaper and a knife, it is necessary to give the product all the inherent features of a weapon, highlight all the necessary and distinctive design details, and identify the key elements of a real pistol: trigger, front sight, butt. At the final stage of processing the workpiece, a mock-up should be obtained that exactly resembles a real pistol and corresponds to the image in the drawing. The greater the similarity, the more pleasant it will be to hold such an object in your hands.

The final stage

Using sandpaper of varying degrees of coarseness, remove all unevenness and roughness and sand all sharp corners.

The presence of a grinding machine or machine can speed up the process of final processing of the workpiece. Some details can be highlighted using a wood burning device. At the final stage, to give a more aesthetically pleasing finished look, the toy should be coated with several layers of dark varnish and allowed to dry thoroughly. To add shine and gloss, the product can be polished with wax.

By doing this activity with your child, you will not only promote bonding, but also teach him how to make a gun out of wood. In the process of processing wood material, you can acquire some skills that earlier child did not possess. And, without a doubt, it is very nice to have something made with your own hands.

There will always be a place in the world resourceful people imaginative and experimental. It is thanks to such curious experimenters that very useful things sometimes come into being, often assembled from improvised means. With your own hands you can make beautiful crafts to decorate your home, as well as various stands, shelves, vases, even from old things.

However, today we will talk about how to make a homemade pistol at home. Some people are only interested in this out of curiosity, and sometimes attackers have a similar goal. Of course, this requires prior knowledge of the general design of the pistol and its parts.

How to make a gun

Thus, industrially manufactured pistols are subject to mandatory technical documentation requirements for each individual type of weapon. Documents for weapons indicate such characteristics as ballistic properties, reliability of the weapon, and what degree of threat it poses to the owner. The weapon itself is manufactured using specialized equipment.

Assembling a pistol

So how did it become possible to make a pistol with your own hands at home? There are many proven methods for this, namely:

• you can make each individual part for the gun yourself;
• you can assemble a pistol from disparate parts, while some parts can be manufactured either industrially or independently;
• you can remake a finished pistol, most often this is done to add existing weapons necessary properties that will change its original purpose;
• you can also remake individual devices and get a very real firearms(For example, air gun, starting, construction and installation).

How to make an ignition

Most often, a pistol is made at home from those parts and tools that are at hand based on ready-made drawings. There is no need to talk about any documentation, specialized equipment, and especially safety precautions in such conditions.

So, “ignition” is a real homemade product, which is assembled from such basic parts as a barrel, handle, fasteners, as well as many other parts. It depends on the wishes of the master himself. To make “ignition” we choose a thick-walled steel pipe with a diameter of no less than 8 and no more than 20 mm. In order for the gases to flow through the pipe in the same direction, the end of the pipe can either be flattened or welded, and sometimes it becomes necessary to tighten the end of the pipe with a bolt, cutting a thread inside the steel pipe.

The handle should be such that it is comfortable to hold in your hand when shooting. As a rule, it is most often made of wood. To do this, a cutout is made under the circular-shaped barrel on the handle itself. The barrel is attached to the handle using metal plates. In such a pistol, match sulfur is usually used as a charge, and bullets are replaced by any available items, for example, balls from a set of bearings.

Now it is clear that making a pistol is quite possible for any person interested in this topic, and does not cause any particular difficulties. It is only important to remember that by making weapons at home, a person automatically exposes himself and his loved ones to danger. Under no circumstances should a gun be given to children. And also try to follow safety precautions!

How to make a gun out of paper

There are plenty of homemade crafts in various ways assemble a pistol with your own hands from scrap materials. You can even make a gun from a clothespin or a wooden gun. To do this, look on the Internet for a video on how to make a pistol. You can also watch videos on how to make a pistol from Lego, a pistol from a pen, and even how to make a pistol from wood. If you want to do something interesting in free time, you are invited to make a paper pistol that also shoots. So, first you need a regular sheet of paper, scissors, an eraser and any adhesive tape.
Do not under any circumstances make or take a gun with you to work or school! This can lead to extremely unpleasant consequences!

How to make a paper gun

Step 1
First of all, we make the handle. We place a sheet of paper horizontally in front of us and bend it at the bottom by 3.8 cm. Thus, wrapping the paper around the first bend, we continue to bend it until the paper folds into a tube measuring 3.8 cm. Next, to connect the two edges of the sheet, and also along long side, you need to glue them with tape. Then fold the sheet in half. And in the center you need to make a sharp bend.

Repeat all steps from the beginning. Only now make two parts measuring 2.5 cm and 1.3 cm.

Bend the handle. To do this, bend a 4 cm piece in the center so that the bend is visible. Next, you need to measure 2.5 cm from the center on both sides of the edges, and use these marks to bend the sheet so that its edges meet under the central fold point at the bottom.

At this stage you need to make a slot for the trigger. Cut a 1.5 cm long slit in the central bend. You only need to cut off a small amount. To make cutting easier, make the opposite fold from the center fold.

Now fold the paper along the central fold so that the corner parts are aligned with each other. This is the frame of the gun that will house the hammer and barrel.

To insert the barrel, thread a 2.5cm strip through either side of the curve of the handle. Check that both ends pass through the handles correctly. The whole design should look like a pistol.

To cut the trigger, cut a small piece from the back of the gun. This will hold the trigger.

And the last step is to take the elastic band and stretch it from the barrel of the gun to the end. The elastic should be 1 cm above the corner of the strip and behind the slot itself. If the elastic does not hold well in front of the barrel, make a small cutout in the front in which it will be located. Also note that the paper may wrinkle as you put the rubber band on. To prevent this from happening, glue two rods to the sides to strengthen the trunk.

Finally, you can make origami paper – shuriken bullets. Just place the corner of the shuriken between the halves of the barrel near the trigger. During the shot, the rubber band should catch and send the shuriken flying!

How to make a gun yourself?

When we think about what a toy shooting gun should be like, we immediately imagine a large design with big amount parts, complex mechanisms, additional accessories. But in fact, you can make a gun that shoots from ordinary thick cardboard or a wooden panel. Don't believe me? Then read and remember the instructions on how to do this.

How to make a gun from wood

1. Prepare a wooden panel measuring 20x12 cm and 2.5 cm thick.
2. Draw the outline of the gun on the surface, for which you can use an old plastic toy or a paper template.
3. Cut out the drawn outline with a band saw.
4. Round off the edges of the trigger guard, grip, and barrel using a sander (be careful not to remove too much!).
5. Cut the trigger with a scroll saw (be sure to hold the gun in a vice to avoid injury).
6. Make indentations in the trigger area with a cutter.
7. Give the hammer its final shape using a rasp.
8. Saw out notches on the trunk with a grinder, then continue cutting with a chisel.
9. Clean off any imperfections with sandpaper.

Now we have to construct the firing mechanism. Making your own shooting pistol is quite difficult. For everything to work out correctly, you need to use step by step instructions.

Thus, at home you can make a pistol that will also shoot. Let's try to fire a practice shot. We take the gun in right hand. With your thumb we push the sear up - it moves the piston along the barrel. In this way, a rubber band is shot from wooden pistol.

If the description is not enough for you, then you can watch the video on this page on how to make a pistol.

Let's also consider another method of making a shooting pistol.

How to make a gun out of paper

At home, it is not always possible to use the tools with which we constructed a wooden pistol. But it can also be made from cardboard.

Making a barrel

Fold the A4 cardboard sheet several times until you get a thin strip in the form of a long rectangle - this will be the trunk.

Making the handle

Fold the A4 cardboard sheet several times in the form of a thick strip - this will be the handle.

Now we unfold both blanks, place the barrel on the handle, bending the edges slightly towards the center. The handle needs to be folded in half and a longitudinal hole cut at the base.

Making the trigger

Roll a sheet of cardboard along the long side. Fold the sheet into small pieces and then in half. Insert the workpiece into the hole cut out on the handle.

How to make a shooting mechanism

Cut the trunk on both sides. Cut the elastic from the unnecessary tire and insert it into the resulting slots.

Now you can shoot paper from our gun. How? We put the crumpled paper ball into the groove, thumb remove the rubber band and release. It contracts and shoots out a paper ball.

Using a homemade cardboard gun, you can close range even knock over a tin can. Therefore, you must use it very carefully and do not shoot towards people and animals!

How to make a gun from plywood

To complete the picture, let's look at how to make a gun at home from plywood. To do this we need to do the following:

A shot from a plywood gun is made as follows: the trigger is pressed, the rubber band clings to it and the shot occurs. You can use ordinary small buttons as bullets.