How to dye fur at home. Is it possible to dye a white mink coat?

In some cases, it is impossible to do without painting the fur. You need to dye natural fur at home if you are making something out of it, if the fur of your fur coat has faded in the sun while being worn, or if you no longer like the color of your fur product.

But how to dye fur correctly so as not to spoil its appearance? Of course, the easiest way is to contact a specialized studio. But why, if anyone can dye or tint fur at home.

If you decide to dye natural fur yourself, remember that you first need to clean it, since dirt prevents the dye from penetrating the structure of the pile.

Important: before you start dyeing your fur coat, vest, fur collar or a hat, treat this item with an alkaline solution that you can prepare yourself. To do this you will need:

1. Water - liter
2. Soda – 2 tsp
3. Dishwashing liquid – 1 tsp.
4. Ammonia from the pharmacy - 1 tsp.

Fur cleaning instructions:

• Prepare the solution by thoroughly mixing all substances.
• Apply a rich cream to the flesh. This is necessary in order to prevent it from drying out.
• Using a brush, apply the solution to the pile, distributing it evenly over the entire surface.
  Rinse the fur under running clean water.
• Place the fur item in horizontal position and leave to dry at room temperature.

How to dye natural fur with hair dye?

First of all, having decided to dye natural fur yourself, you should decide on the color in which you will dye it. General recommendations boil down to dyeing a fur product in darker colors. If, on the contrary, you want to paint it in light color, then the fur must first be lightened with hydrogen peroxide.

You will need:

• Hair dye
• Latex gloves

Instructions

1. Before dyeing your fur coat, thoroughly soak it in water.
2. Dye the fur with hair dye.
3. Spread the paint evenly over the surface of the fur.
   Let the paint sit for as long as indicated in the paint instructions.
4. To wash off the dye, rinse the fur in warm water, to which you need to add a little table vinegar.
5. Dry the product by straightening it and laying it out to dry in a vertical position.

How to dry fur?

You need to dry the fur correctly, otherwise you can irreversibly ruin its appearance.
Never blow dry your fur; use a steamer instead.

After drying the fur with a stream of steam, comb it with a fur brush, which can be purchased at a pet store. You need to comb the fur against the growth of the pile.

To give your fur a natural shine, you can rinse it with hair balm or a solution that you can prepare at home. Using these products will allow you to give your fur a natural shine and softness.

How to tint fur with spray?

Usually, at home, the spray is used to tint long ends of fur. At the same time, the undercoat and undercoat itself remain intact.

You need to spray the spray on the fur at a distance of 60-70 cm from its surface. You need to distribute the coloring matter slowly, smoothly moving the can from one side to the other.

As soon as the tips of the fibers are dyed, comb the fur with a brush to prevent it from further sticking and remove excess moisture.

In addition to hair dye and spray, you can use hair tinting shampoo at home.

This instruction on how to dye fur at home is for informational purposes only. Also recommends watching a video demonstrating the entire process.

How to dye faux fur

Once you decide to dye your faux fur item, decide what color you want to dye it. Perhaps it just needs to be updated, giving it a fresh look.

You can dye faux fur with hair dye. If you need to update your color, use permanent hair dye. If you just want to refresh your color, use a hair tinting shampoo or spray.

Before painting, it is recommended to clean the faux fur from traces of grease and dirt, which most often arise from contact with the skin. If the fur is not cleaned first, the dye may be distributed unevenly.

To clean faux fur at home, just use a regular soap solution, which can be applied with a sponge.

When you start painting, make sure that the color you choose will go well. To do this, apply paint to the pile from the reverse side of the product. If you are satisfied with the result, feel free to start painting the fur.

Important: prepare the faux fur product by laying it flat on the surface and pulling it along the edges, otherwise the fur will be dyed in shreds.

When dyeing fur from artificial material strictly follow the instructions for the hair dye.

After the time specified in the instructions has passed, wash off the paint. Moreover, you can hand wash the product without using powder or shampoo. Just do it without fanaticism!

While still wet, the faux fur product needs to be combed and allowed to dry, and after it is completely dry, it needs to be combed again.

It is known that fur products look beautiful and luxurious and provide good warmth in the winter cold. Like any clothing, they lose their great appearance over time. If your favorite thing has faded or is simply boring, you can paint it at home without turning to specialists, thereby turning it into something new and unique.

How to dye arctic fox fur at home

Arctic fox fur lends itself well to dyeing. If you want to upgrade your Arctic fox item, you will need:

• hair dye;
• fatty cream (can be replaced with glycerin);
• hair balm;
• rubber medical gloves;
• a brush or an old toothbrush for applying the coloring composition;
• vinegar.

1. Lubricate the inside with cream.
2. Stretch the material on a flat surface and secure it.
3. Thoroughly moisten the previously cleaned surface with water.
4. Wear gloves and quickly apply the coloring compound, smoothing the pile with your hand.
5. Wait for the period of time specified in the dye instructions.
6. Rinse the lint under running warm water and rinse in a vinegar solution.
7. Treat the item with balm diluted in water and rinse.
8. Lubricate the inside again with cream, carefully stretch it, pin it with pins, and let it dry.

Mink coat looks great and is durable. If the color of the product has faded, you can dye the mink fur. Before you dye mink fur at home, prepare:

• hair dye;
• spray;
• a comb with fine teeth;
• shampoo;
• hair balm;
• fatty cream (glycerin is possible).

1. Clean the item from grease and dirt.
2. Treat the flesh with cream.
3. Prepare the coloring composition according to the instructions.
4. Lightly moisten the surface with water using a spray bottle.
5. Apply the dye to the pile with a spray bottle from a distance of 50 cm.
6. Even out the tone by combing the surface with a comb.
7. Wait half an hour.
8. Wash off the coloring composition warm water with shampoo.
9. Rinse with balm diluted in water.
10. Apply the cream to the flesh.
11. Lay out the product and leave it to dry.
12. Comb the fibers in the desired direction.

Before you dye your fur at home, you need to clean it. Paint particles have difficulty penetrating greasy, contaminated pile. Before dyeing a fur coat or other fur item, you should clean the product with an alkaline solution. To do this you will need:

• water – 1 l;
• salt – 2 tsp;
• ammonia – 1 tsp;
• detergent (dishwashing gel, washing powder) – 1 tsp;
• baking soda – 2 tsp.

1. Dissolve the ingredients in water, stir well until smooth.
2. Treat the flesh with a rich cream (possibly glycerin) to prevent drying out.
3. Apply the resulting solution evenly to the pile using a brush.
4. Rinse thoroughly under running water.
5. Lay the item out and let it dry at room temperature.

Coloring fur with hair dye

The structure of natural fur pile resembles human hair. Therefore, hair dye is suitable for home dyeing. This drug can be purchased at any supermarket or household chemical store. The choice of colors and shades is varied, and it will not be difficult for you to find the right tone. It is better to choose shades darker than the original color, for example, black. To give something a light shade, you need to bleach it by treating it with a solution of hydrogen peroxide. Dyeing fur with this product is simple and reminiscent of the procedure for coloring your own curls.

Another product intended for dyeing at home is a special spray. This product is used to add tint to long ends. The undercoat and undercoat are not affected. The dye dissipates at a distance of 60-70 cm. The can should be moved slowly and measuredly to distribute the substance evenly. The painted area should be combed immediately to remove excess product and prevent the fibers from sticking together.

Video: is it possible to dye a mink coat?

We give a fur product a second life - learn how to dye fur at home

Happy owners of fur items know that they fade over time. To restore color, you don’t have to turn to professionals for help - you can do it at home. Knowing how to dye fur, you will give the product a second life at minimal cost.

Before proceeding directly to painting, the fur must be prepared. Clean it thoroughly from dust and dirt so that the paint adheres well. For these purposes, you can use an alkaline solution.

For a liter of water you need to take the following components:

• approximately 15 grams of salt;
• two teaspoons of baking soda;
• 7 ml detergent;
• 5 grams of ammonia.

Mix all ingredients to obtain a homogeneous mass. It is convenient to apply it with a brush. Be sure to wash off the product. You can also use another composition: combine water, vinegar, and alcohol in equal proportions.

The wrong side, the inner side, also needs to be processed. It is necessary to apply glycerin or fatty cream to it.

This will prevent skin deformation. The fur must be pinned to a board so that the item does not lose its shape during the process of dyeing and drying.

If the interior is poorly painted, it will “shine”, creating the effect of sparse fibers. It can be tinted from the inside out. How to paint the inside of the fur? Can be used special remedy or apply hair dye after testing it on an inconspicuous area.

Using hair dye

It is often used to color arctic foxes. It is quite dense, so it is better to buy two or three packages so that the color is rich and uniform.

Before applying the composition to the entire surface, test it on a small piece.

You can see how he “behaves” when interacting with chemicals. Choose a paint one or two shades darker than the natural color - it will make its color richer.

If a thing has turned yellow, it is better not to paint it, but to lighten it. This can be done using hydrogen peroxide. Only after this is it necessary to apply the coloring composition of the appropriate shade.

Owners of stylish things often think about how to dye natural fur at home. This must be done with quick, even movements. Leave the paint on for the time indicated on the package.

After applying the paint, it must be rubbed over the surface so that there are no bright spots left. This must be done carefully, without twisting the fibers; before doing this, you should wear gloves.

After the period indicated on the package has expired, rinse in warm water and vinegar. To make it soft and shiny, after drying, you can apply the balm that comes with the paint.

Rinse it thoroughly and dry the fur. After such manipulations, the item will look like new.

Spray paint

Owners of items made from arctic fox fur sometimes notice that the tips begin to turn yellow. To restore the original appearance, it is not necessary to paint the entire product; it is enough to use suede paint from an aerosol can.

Select the desired color and spray at a distance of at least 70 cm from the product. To prevent the hairs from sticking together, the can must be constantly moved, and after spraying, immediately comb them with a special brush.

If you want to dye your Arctic fox fur a different color at home, you will need regular hair dye. To get the desired result, you need to follow the instructions. But it is worth remembering that the color will last no more than 8-9 months, and then it will gradually begin to wash off. To restore the original appearance, the item will have to be painted again.

Is it possible to dye mink products?

Real fur is always in fashion. But over time, stylish mink items lose their rich color and shine. How to dye fur at home? There is nothing difficult about this if you follow the basic rules.

Often women dye their mink with regular hair dye. Before applying the composition, mink fur must be prepared in the same way as arctic fox fur. To make the procedure easier, you can use an aerosol or spray bottle. Spray the product at a distance of approximately 70 cm. Do not forget to comb the hairs with a brush or at least rub them with your hands. To dry, you can use a hairdryer or allow it to dry naturally. Hair balm applied to the surface will give shine and softness. Be sure to rinse it off thoroughly.

Products made from it are very popular due to their attractive appearance and reasonable cost. But over time, faux fur needs painting.

If you want to radically change the color of the product, choose hair dye high degree perseverance. To refresh the shade, a tinting shampoo is suitable.

Pre-clean the product from dust and dirt with a swab soaked in shampoo. Apply the coloring composition to a small area to evaluate the result.

In order for the entire surface to be painted well, the product must be well stretched and fixed. Run the brush in the direction of the grain, grabbing the fabric as well. Follow the dyeing time specified in the instructions and rinse the fur thoroughly. Brush the wet bristles with a brush and let the product dry.

If you know how to dye real or faux fur, your items will always look fresh and neat.

The best ways to dye fur at home

Have you ever thought about how to dye fur at home? But surely every modern fashionista has a vest, sheepskin coat or fur coat made of natural or faux fur in her wardrobe. During use, the fur can change its original appearance, fade in the sun, and perhaps you will come up with the idea of ​​​​changing the appearance of the old thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, with an impressive cost, they do not always meet customer expectations. That is why the question of how to dye fur at home, whether it is even possible to carry out this procedure yourself, is very common today. We will talk about it within the framework of this material.

Preparatory activities

The success of the “operation” largely depends on how well the preparatory measures are carried out. When you decide to update the shade of your fur or radically change it, do not forget to clean it, because dirt prevents deep penetration of the dye and, accordingly, affects the result of dyeing.

To clean, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at your nearest pharmacy. All components must be thoroughly mixed together until a homogeneous mass is obtained. To prevent drying out, apply a rich cream, such as baby cream, to the inner layer (the bottom layer of the skin). Then, armed with a brush with stiff bristles, apply an alkaline solution to the fur, spreading it over the entire surface, then rinse the product thoroughly under running water and lay it in a horizontal position to dry.

If you don’t know how to dye fur at home or what products to use, you’ve come to exactly the right place. Today, specialized stores offer quite a few professional dyes and compositions, but hair dye is still no less effective and affordable. You can find it in any supermarket at affordable price, and the variety of shades allows you to satisfy taste preferences every fashionista.

So, for coloring you will need paint, a brush with which you will apply the composition to the fur and, of course, latex gloves- an indispensable means of protection. When choosing a brush, give preference to one with stiff bristles.

How to dye arctic fox fur at home? Luxurious vests made from arctic fox skins have been a trend for the last few years. They will be relevant in the near future, which is why owners of such luxury need to properly care for it: update the shade of the fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of a fur product. So why not take advantage of this opportunity?

If you do not know how to dye natural fur at home, in particular, arctic fox fur, it is important to become familiar with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing arctic fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.

To get maximum results, wet the arctic fox fur with water, then begin applying the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to maintain the time indicated on the packaging. After this, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.

Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be more demanding. The same hair dye is perfect, but it is better to give preference to the professional series, which will give the most natural shade possible, and will last much longer than budget analogues. But some people recommend using spray paints. IN in this case The paint must be applied from a distance of 60-70 cm in several layers. Don’t be afraid to layer the paint - this technology will allow you to achieve an expressive and deep noble shade.

If you are looking for an answer to the question of how to dye mink fur at home, use general rules, working with any fur. In all respects, the dyeing procedure completely repeats the procedure for transforming arctic fox fur described above.

This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made from mouton fur gives. But not everyone knows how to properly care for fur, which is why, over time, there is a need for additional coloring.

Mouton products are rightfully one of the most unpretentious, but when it comes to coloring, you should be patient, be extremely careful and careful. How to dye fur at home with paint in the case of a mouton. The pile of such fur is quite thick and dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.

And one more thing: before dyeing, test a small amount of pigment on a small area of ​​the fur product - if stains and bald spots appear, it is better to abandon the idea of ​​dyeing yourself and entrust it to professionals.

Do you think only natural fur evokes admiration and admiring glances from others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have been revolutionizing the entire idea of ​​fashion, beauty and luxury. If you have a jacket or bag made from this material in your wardrobe, update it with dyeing. Want to know how to dye faux fur at home? We'll tell you about it.

The same hair dye is suitable for coloring - in the case of faux fur You can experiment, give preference to brighter, acidic shades. For preliminary preparation, an ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.

In order to get an ideal result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.

We tried to figure out how to dye fur at home, and listed several of the most effective ways. With proper approach to the procedure, use quality materials and tools you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information presented and be sure to take advantage of our tips and recommendations.

Often a favorite fur coat or vest loses its appearance, although other characteristics are still quite excellent. The fibers fade, become dull and give the product a very worn look. If you want to enjoy the warmth and comfort of your favorite thing, then you can shade it a little. But not everyone knows how to dye arctic fox fur at home.

You don’t have to bother with painting it yourself, but rather take the product to a special workshop, where everything will be done quickly and professionally. But the cost of such a service is often prohibitively high. It will be much cheaper to learn how to dye natural fur at home and do this work yourself.

Important: Please note that if the product is still new, it is strictly not recommended to dye it simply to change the color, since any dyeing of fur shortens its service life.

Each type of fur is beautiful and original in its own way. The painting of each of them also has its own characteristics:

• White rabbit, chinchilla or mink fur is the easiest and simplest to dye, because it does not require pre-lightening. You can use any color that can cover the yellowness that appears.

Tip: Keep in mind that rabbit fur is very sensitive to chemicals, so it must be dyed with extreme caution.

Preparation

In order for you to get a very good effect, the fur product must be prepared for painting. Then the paint will apply much more evenly and there will be no bald spots. The most important thing is to thoroughly clean your fur coat or vest. To do this, you need to prepare a mixture of the following substances:

• 2 tbsp. l. salt;
• 1 tbsp. l. ammonia;
• 2 tbsp. l. soda;
• 1 tbsp. l. washing powder;
• 2 liters of warm (not hot) water.

All components must be mixed and the resulting mixture carefully applied to the fur. Lightly brush the bristles so that not only the top, but also the bottom part is cleaned. Then moisten a clean cloth with water and wipe the fur from the composition.

After such cleaning, the fur must be dried naturally, without using heaters or a hair dryer. It is also not recommended to leave the product exposed to direct sun rays.

How to paint?

How can you dye fur? This is a completely natural question that arises among many people who are puzzled by the question of how to dye mink, rabbit or arctic fox fur at home. Of course, there are several very realistic home dyeing technologies.

Professional product

You can use special paint for fur, which is sold in hardware stores. It lies very naturally on the fibers, as it is designed taking into account the characteristics of animal fur.

Hair dye

A more affordable option is hair dye. This is also the most popular coloring method, because you can choose any color from a huge palette.

Important: Keep in mind that fur should always be dyed more dark shade. With time fiery red color will turn into “rusty” or red, and black will fade to dirty brown.

So, how to dye fur at home using hair dye:

• mix all paint components according to instructions.
• put on gloves.
• treat the inner skin (skin) with baby cream, glycerin or petroleum jelly to prevent it from drying out;
• wet the fur so that the paint is distributed more evenly;
• apply paint with a brush to the entire fur surface;
• remember the fur a little with your hands;
• wait 35-45 minutes;
• wash off the paint with water;
• lay the item on a horizontal plane, squeeze out excess moisture with your hands, and leave to dry;
• After drying, comb the fur.

You can not dye the entire fur, but only the tips of the fibers. Typically, they are lightened to give the product a richer appearance.

Suede paint

You can treat the faded tips of the fibers with suede paint, which is sold in aerosol cans. To do this, place the spray can at a distance of at least 0.5 meters from the item and evenly paint the entire surface. Leave the fur to dry for a while and then rinse it thoroughly. After this, prepare a fixing solution: 5 tbsp. l. vinegar per 2 liters of water. Wipe the pile with this liquid and leave it to dry.

If a fur item is already dark, but you would like to dye it a bright and rich shade, then you can bleach the fur. Hydrogen peroxide tablets or hair lightener will help with this.

Peroxide is diluted with water in a ratio of 1:3. If you use clarifier, dilute it as written in the instructions. Different manufacturers may make different concentrations of clarifiers. Apply the prepared mixture to the fur and leave for 10-15 minutes. You cannot keep the composition on the pile longer, as the hairs can become brittle. After treatment, rinse the fur with water and dry naturally. It can be painted only after it has completely dried.

When deciding to lighten and dye fur, carefully select the color, because it will be undesirable to carry out these procedures again. Not a single piece of fur, even the highest quality, can withstand repeated dyeing.

When dyeing fur, it is important to know some nuances:

• The fur you decide to dye should not be too shabby.
• Only clean fur will dye well, so it must be cleaned first.
• The yellowed white fur of the Arctic fox can be simply lightened.
• Before using any dye, be sure to test it on an inconspicuous area of ​​fur.
• When painting, you can hide some flaws and defects.
• Instead of full-fledged paints, sometimes you can use small folk tricks. For example: the fur of a red or steppe fox can be quickly and painlessly renewed using a strong solution of potassium permanganate. In this case, use a small sponge. It needs to be dipped into the solution and passed over the villi, being careful not to touch the core.
• After dyeing and drying, the fur must be combed so that it becomes fluffy again.
• Using tinting shampoo, you can create a unique decor on your fur product. You just need to show a little imagination.

Now you know whether it is possible to dye the fur of arctic foxes and other fur-bearing animals, and you can also imagine the technology of this process. The main thing is to strictly follow all instructions. And your favorite and cozy fur coat will delight you for some time with its warmth and impeccable appearance. If you do not dare to take such an important step as dyeing fur, then contact specialists at a dry cleaner or workshop for repairing fur products.

It happens that with the onset of cold weather, you take your favorite white down jacket out of the closet and see that it’s no longer worth wearing... The down jacket itself is intact, intact, but The white fox collar has acquired an unpleasant yellow tint. You take off your collar with a sigh and decide that eventually you will have to buy new thing, in the meantime, you will wear it without the excellent addition in the past - the arctic fox trim. But don’t rush to throw the collar in the trash or cut it into fur scraps. The situation can be easily corrected.

At home, a fur collar can be dyed using regular hair dye. And this procedure will not require much effort from you.
In this article we present step by step instructions for dyeing fur.

1. In order for the dye to penetrate smoothly into the structure of the fur, it is necessary before painting degrease and clean from dirt.
To do this, you need to prepare a special solution. We take:
- table salt – 3 teaspoons;
- ammonia – 1 teaspoon;
- any liquid detergent or shampoo for an animal – 1 teaspoon;
- baking soda – 2 teaspoons;
- water – 1 liter.
We treat the fur with the solution using a brush. Then it should be thoroughly rinsed and dried.

2. It is advisable to protect the inner, lint-free side of the collar from drying out before painting. To do this, it is lubricated with glycerin or any nourishing cream. Otherwise, your collar has a high chance of tearing.

3. Best option – dye the fur a shade darker than he was before. But if your paint contains bleaching agents, you can achieve the original color. Since the fur of the Arctic fox is much thicker than the hair on a person’s head, we recommend stocking up on more than one tube of paint.

4. Now you can start to dyeing the collar. We use paint according to the instructions. In order for the dye to be distributed evenly, it is better to pre-moisten the fur with water. Work with gloves, apply the paint quickly, spread it over the fur with your hands - the main hair and undercoats should be thoroughly coated.

5. At the end of the dyeing time, rinse the fur generously with water. After this, rinse the collar in a vinegar solution. To rinse and add shine and volume to the fur, you can use hair conditioner instead of vinegar.

6. When our collar is rinsed, you should carefully dry it with a towel.

7. To prevent the collar from shrinking after dyeing, it must be dried on a flat surface, thoroughly straightened, stretched and pinned to the surface with needles. The collar should be dried with the fur facing up. The mesh will take the longest to dry, so before removing the fixing needles, make sure that the collar is dry on the mesh side.

Checking gold and silver at home
Products made from noble metals such as gold, silver are durable....

How to clean fur at home (natural and artificial)
No matter how carefully you treat products made from natural fur, but...

Caring for gloves - how to care for them at home
Gloves in our climate are an urgent need and a significant...

TellSpec - a device for analyzing the composition of products at home
Many of us have probably faced the question: “What’s in my container...

Natural fur coat - refers to image clothing. Such things are bought for more than one season. Time and cleaning make the fur dull, light colors turn yellow, dark colors fade. It is possible to restore the tone by painting. This is carried out in special workshops, sometimes the service is provided by dry cleaners. Regardless of high price You may be refused if the fur, in their opinion, is worn out. More often than not, people are simply too lazy to do such work; it is much easier to refresh the shade of a collar or hat. Work with outerwear responsible, takes a lot of time. The solution is simple; you can dye your fur coat yourself.

Before painting, you need to determine whether the product was previously tinted (during production). Mink has the most varied natural color in the elite segment. It can be black, mahogany (brown), walnut, pearl, silver. The naturalness of the shade is easily determined. If the down is lighter than the spine, the core is plain and white, the product has not been tinted. Even color is a sign of artificiality. The inside of the skin will also be dark. Products that have previously been processed require special care.

It is recommended to choose the desired color a couple of shades darker than the actual one. It is not recommended to lighten dark colors. Multi-colored rabbit or previously dyed colored materials may produce unexpected, undesirable results. White fur coats are tinted twice.

Stages of work on how to dye a fur coat at home

1. Buy hair dye at the grocery store. Don’t skimp, choose a durable, well-proven one. If the clothing area is large, take several packages. This is the kind of paint that can be applied to faded fibers. new color and shine. If the kit does not include a balm for colored hair, you will also have to buy it.
2. Prepare the item thoroughly before painting. Clean from dust and grease. To do this, you can use one of the solutions:
- 1 liter of water, 1 dessert spoon of salt plus the same amount of soda, 10 drops of ammonia (ammonia);
- equal proportions of water, vinegar, alcohol;
- water with shampoo.
Moisten the cloth. Wipe the fur. Without rubbing, in one direction. Rinse off any remaining detergent.
3. Inner side things are thoroughly coated with glycerin or a very rich cream. The base will not be saturated with water.
4. Wear protective gloves.
5. Read the instructions on the paint you purchased. Follow the recommendations when mixing ingredients.
6. Using a wide brush, apply the mixture to the pile, using a wide-toothed comb and using your hand, distribute the mixture evenly. To paint paired elements, dilute the paint once.

Clue

Prepare more mixture, paint induced in different time, from different boxes in the future the shade may differ.

7. Follow the instructions for the time required
8. Rinse off the coloring composition with running water. You need to do this together. Do not soak your fur coat in water. While holding the clothes hanging, rinse the pile thoroughly.
9. To fix the color, rinse in cold water with vinegar (when watering the fur, try not to let the skin become limp).
10. Apply conditioner for colored hair. Leave for a couple of minutes and rinse. The fur will become soft and shiny, and the smell of vinegar will go away.
11. Let it drain excess liquid. Fold the fur coat in half and place it on a wide support.
12. Treat the skin with glycerin a second time.
13. Lay out the clothes with the fur facing out. Use a backing made of dense fabrics that absorb moisture well. Change it every two hours at first, then as needed.

Smooth and comb the product. Dry in a dry, ventilated place. Away from artificial heat sources and direct sunlight. The process takes 3 - 5 days.

Be patient. Quick drying will cause the skins to shrink.

A strictly maintained painting process guarantees an excellent result.